Motors | Drivers | Pumps | Actuators
Showing 985–1008 of 1057 results
-
-
Motors | Drivers | Pumps | Actuators
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
-33%
Motors | Drivers | Pumps | ActuatorsTB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-40%
Motors | Drivers | Pumps | ActuatorsTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency: 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6612 D1 Motor Driver Shield
- Interface: I2C
- Power supply voltage: VM = 15V max
- Output current: Iout = 1.2A ( average ) / 3.2A ( peak )
- Standby control to save power CW / CCW / short brake / stop motor control modes
- Standby control mode-I2C mode: control TB6612’s STBY with I2C protocol
- IO mode: control TB6612’s STBY with Spin
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Thread Size: PT, R, BSPT 1/2 PT, R, BSPT 1/2: Air, Vaccum, Water(no freezing) Body Material: PBT Plastic Thread Material: Nickel Plated Brass Seal, O-ring: NBR Working Pressure: : 0∼60°C | 32∼140°F
-30%
Motors | Drivers | Pumps | ActuatorsThread Size: PT, R, BSPT 1/2 PT, R, BSPT 1/2: Air, Vaccum, Water(no freezing) Body Material: PBT Plastic Thread Material: Nickel Plated Brass Seal, O-ring: NBR Working Pressure: : 0∼60°C | 32∼140°F
- Type of Product: Flow Control
- Model No: NSE 06-04
- Maximum Working Pressure: 10 bar
- Size: ST-NSE
- Fluid: Air, Vacuum
- Thread Size: 1/2″
- Size O.D: 6 mm
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
-24%
Motors | Drivers | Pumps | ActuatorsTL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors,
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer
- I3 and UM models can also be used, and different machines will have different clipping effects.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2100 Stepper Motor Driver, Module
- This driver has 200 steps per revolution in full step (1.8 degrees per step).
- Allowable continuous current per phase: 1.25A (RMS) or 1.77A (max)
- The maximum current in the short term for each phase: 2.5A
- Motor voltage: 5.5 to 46 V
- StealthChop mode to reduce noise
- SpreadCycle mode to increase torque
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TMC2208 Stepper Motor Driver Module
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor Driver Module with Heatsink
- Operating Voltage: 4.5V to 28V DC
- Input Signal Logic Voltage: 3.3V to 5V DC
- Maximum Peak Current: 2A per phase (use with Heatsink and Fan only)
- Maximum Continuous Current: 2A
- Compatibility: 3V3 and 5V microcontrollers
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor DriverF
- Maximum current: 2A per phase (continuous, with cooling), 2.8A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TowerPro MG945 Digital High Speed Servo Motor – Standard Quality
-25%
Motors | Drivers | Pumps | ActuatorsTowerPro MG945 Digital High Speed Servo Motor – Standard Quality
- Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
- Operating voltage: 4.8 ~ 6.6v
- Temperature range: 0- 55deg
- Gear Type: Metal gear
- Dead band width: 1us
- servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
SKU: n/a -
