development board
Showing 1–24 of 32 results
-
DIY Learning and Robot Kits, Uncategorized
AEROKART INDIA 2Pcs 830 Point and 2Pcs 400 Point Solderless Breadboard
-50%
DIY Learning and Robot Kits, UncategorizedAEROKART INDIA 2Pcs 830 Point and 2Pcs 400 Point Solderless Breadboard
- Package includes 2Pcs 830 tie Breadboard (MB-102) and 2Pcs 400 tie Breadboard.
- With tight plug-in contacts, the components will sit well after assembly therefore there is no wobble.
- White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.
- With Self-Adhesive Tape on the back allows to stick on the arduino prototype shield.
- Good for Arduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.
SKU: n/a -
Development Boards
AEROKART INDIA 3 pcs Breadboard with 400 Tie Points (BB-801) Solderless Prototype Kit Universal PCB Bread Board Plus 2 Power Rail and Adhesive Back for Small DIY Kits Arduino Proto Raspberry rasp Pi Project
-65%
Development BoardsAEROKART INDIA 3 pcs Breadboard with 400 Tie Points (BB-801) Solderless Prototype Kit Universal PCB Bread Board Plus 2 Power Rail and Adhesive Back for Small DIY Kits Arduino Proto Raspberry rasp Pi Project
- Solderless SS breadboards, with tight metal spring under tie point for good connections, springs aligning perfectly with points makes the tightness of all 400 points are the same. electricity flows horizontally , there are 5 insert points on the horizontal power path, low electrical resistance.
- Mutiple board can be connected together for expansions (bolts on the side) , 2 removable power rails on both side of the pcbs, Self-adhesive tape on the back of the bread board(single sided Prototyping Circuit boards 400 pins holes solder free).
- Type: BB801 | Busboard Hole-diameter: 0.9 mm | Hole-pitch: 2.54 mm / 0.1 inches | Thickness: 10mm | Kits : 3pcs 400 pin board | White Electronics Protoboard single-sided ABS
- voltage: 300v | low current: <5A | 20-29 AWG(0.3-0.8mm) jumper dupont wires | compatible with Raspberry Pi (rpi) and Arduino, led diode, screw terminal, dupont wire, connector, resistor , capacitor , IC, DIP, sensors, transistor and other electric power components or devices| For Computer Science Class hobby hobbyist experiments point-to-point projects
- WARRANTY AND CUSTOMER SERVICE – We provide 1 year warranty for this pcs board, Our Electronic Customer service team is ready for income request 24×7. Package :3 pieces
SKU: n/a -
Electronic Modules, Uncategorized
AEROKART INDIA 3.3V/5V Breadboard power module+MB-102 830 points Solderless Prototype Bread board kit +40 Male to Male Jumper wires
-42%
Electronic Modules, UncategorizedAEROKART INDIA 3.3V/5V Breadboard power module+MB-102 830 points Solderless Prototype Bread board kit +40 Male to Male Jumper wires
- Solderless breadboard (MB-102)
- Jumper wire size: 20 CM
- Input Voltage : 6.5-12V (DC)
- Maximum Output Current: < 700ma
- Can be switched to 0V, 3.3V, 5V
SKU: n/a -
Development Boards
AEROKART INDIA Breadboard 840 point with jumper wires Set (20+20+20)
- Comes with 840 tie points: 128 groups of 5 connected terminals, 8 bus of 25 connected terminals
- Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, leds, resistors, capacitors and virtually all types of components
- Each cable length about 20cm
- Can modify or revise the circuits easily
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
SKU: n/a -
Uncategorized
AEROKART INDIA Solderless Prototype Breadboard | 1×830 tie in Point Breadboard 2×400 tie in Points Circuit Boards 6×170 tie Points Mini Modular breadboard Kit
-10%
UncategorizedAEROKART INDIA Solderless Prototype Breadboard | 1×830 tie in Point Breadboard 2×400 tie in Points Circuit Boards 6×170 tie Points Mini Modular breadboard Kit
- 100 % SATISFACTION GUARANTED ★ Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
- NO WORRIES ABOUT CIRCUIT FAILIER ★ Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
- PIN HOLES ARE EXQUISITELY LINING UP ★ Without any intermittent connections; Holes are properly cut out
- PERFECT SET FOR YOUR EXPERT PROTOTYPING ★ A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
- PACKAGE COMPONENT ★ 1 X 830 tie-points (6.5 x 2.2 x 0.4″ ); 2 X 400 tie-points (3.3 x 2.16 x 0.31 Inch); 6 pcs 170 tie-points Mini (1.77 x 1.35 x 0.37 Inch)
SKU: n/a -
Development Boards, Original Arduino Boards and Shields
Arduino MKR Therm Shield
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
SKU: n/a -
Development Boards, Original Arduino Boards and Shields
Arduino MKR Vidor 4000
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
SKU: n/a -
-
Original Arduino Boards and Shields
Arduino Nano R3 Compatible Board with CH340 chip SOLDERED
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
Specification:
Microcontroller ATmega328 Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 1 KB or 2KB EEPROM 512 bytes (ATmega168) or 1 KB (ATmega328) Clock Speed 16 MHz Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Operating Voltage 5V Input Voltage 7 – 12 V (5V model) SKU: n/a -
-
Original Arduino Boards and Shields
Arduino Uno R3 Compatible board+ Cable for Arduino Uno
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has everything needed to support the microcontroller, you need to simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Features:
- Easy application programming using open source IDE
- Easy to learn Microcontroller using Arduino boards.
- 256k Flash
- Easy application programming using open source IDE
- Ready Library for most of the sensors and application modules.
Specifications:
- ATmega328 Controller
- Digital IO 13
- PWM Channel 6
- Working Freq. 16MHz
- DC current / IO 40mA
- DC current / IO 50mA (3.3V)
- Input Voltage 6V to 20V DC
- Flash 32Kb
- SRAM 2Kb
- EEPROM 1Kb
SKU: n/a -
Basic Electronic Components
Digilent Arty S7-25: Spartan-7 FPGA Development Board
The Arty family of Digilent FPGA/SoC boards was designed with versatility and flexibility in mind. With universally popular Arduino™ headers and multiple Pmod™ ports, a Xilinx Arty board will be the most adaptable Xilinx dev board in your toolbox.
The Digilent Arty S7 is an affordable, ready-to-use development platform designed around the Xilinx Spartan®-7 FPGA family. With the Spartan-7 devices, the Arty Spartan-7 development board offers best-in-class performance-per-watt, along with small form-factor packaging to meet the most stringent requirements.
Features:
- Internal clock speeds exceeding 450MHz;
- On-chip analog-to-digital converter (XADC).
- Programmable over JTAG and Quad-SPI Flash
-
256 MB DDR3L with a 16-bit bus @ 325 MHz (650 MT/s)
-
128 Mbits Quad-SPI Flash
- 100 MHz External Clock
-
USB-JTAG Programming circuitry (Micro B USB cable required – add one free with your FPGA purchase!).
-
Powered from USB or any 7V-15V source
SKU: n/a -
Basic Electronic Components
GROUPGETS LLC ORANGECRAB-R0D2-25 Development Board, Orange Crab, LFE5U-25F-8MG285C, ECP5 Family FPGA
-59%
Basic Electronic ComponentsGROUPGETS LLC ORANGECRAB-R0D2-25 Development Board, Orange Crab, LFE5U-25F-8MG285C, ECP5 Family FPGA
GROUPGETS LLC ORANGECRAB-R0D2-25 Development Board is a compact FPGA development board featuring the Lattice ECP5 FPGA and designed for RISC-V experimentation and softcore SoCs. It follows the Adafruit Feather specification, offering a direct USB connection to the FPGA for easy programming. GROUPGETS LLC ORANGECRAB-R0D2-25 Development Board includes 128Mbit or 512Mbit QSPI Flash, DDR3L memory, and a MicroSD socket for storage. It has a LiPo battery connector with a charger, a 48MHz oscillator, and user I/O options such as a button, RGB LED, and 20 I/O pins. With its small size (22.86mm x 50.8mm) and high-efficiency power supply, it’s perfect for portable FPGA projects.
Features:
- Compact Size: Small form factor.
- Lattice ECP5 FPGA: Available in 25F and 85F configurations.
- Onboard DDR3L Memory: Provides efficient data handling.
- Preloaded USB Bootloader: Simplifies setup and programming.
- Direct USB Connection: Full-speed USB (12Mbit) to FPGA via USB-C.
- 128Mbit or 512Mbit QSPI Flash: For program storage.
SKU: n/a -
Basic Electronic Components
LILYGO T-FPGA Development board
T-FPGA is an open-source FPGA development board. It is designed for FPGA and embedded system development with an Altera Cyclone IV FPGA, 32MB SDRAM, 8MB SPI Flash, and a MicroUSB port, among other features. Supporting multiple development environments such as Verilog and VHDL, the board is ideal for a wide range of applications such as robotics, automation, and IoT.
In addition, the FPGA is special because it has two chips, a wifi Bluetooth ESP32, and an FPGA chip.
Features:
- Equipped with a Field-Programmable Gate Array (FPGA) for flexible hardware programming.
- Designed as a development board for FPGA-related projects and experimentation.
- Suitable for a wide range of applications, from digital design to signal processing.
- Capable of high-speed processing and parallel execution of tasks.
- Multiple input/output interfaces for connecting peripherals and external devices.
- FPGA Chip: GW1NSR-LV4CQN48PC6/15
- Device: GW1NSR-4C
- The size of the flash memory is 256K
- The size of the PSRAM is 64M
- Provides a programmable platform for creating custom digital circuits.
- Integrated with necessary components like LEDs, buttons, and displays for testing and debugging.
- Accompanied by detailed documentation and resources for developers.
SKU: n/a -
Basic Electronic Components
NodeMcu ESP8266 V3 Lua CH340 WiFi Development Board
Introducing the revolutionary NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board! This cutting-edge, low-cost WiFi technology uses a modern, high-level and mature LUA-based programming. It has all the resources on board and I/O pins you need to enhance your existing Arduino projects or any development board with ease.
You can use modern Internet development tools such as Node.js with the built-in API of NodeMCU to put your idea on the fast track immediately. NodeMCU is built on the mature ESP8266 technology and leverages the abundant resources available on the web.
NodeMCU has ESP-12 based serial WiFi integrated on board, which provides GPIO, PWM, ADC, I2C and 1-WIRE resources at your fingertips. It also has a built-in USB-TTL serial with a super reliable industrial strength CH340 for superior stability on all supported platforms. This module is one of the most affordable wifi-modules in the market. V3 or Version3 is the latest version of this module. This tutorial will help you to connect all the versions of ESP8266 NodeMcu, i.e V1, V2 or V3.
SKU: n/a -
Basic Electronic Components
NumatoLab Mimas A7 FPGA Development Board
The NumatoLab Mimas A7 FPGA Development Board is a powerful and flexible platform based on the AMD Artix-7 FPGA (XC7A50T). It is designed for engineers, hobbyists, and students looking to explore FPGA technology and develop a wide range of digital applications. This board combines robust features with user-friendly interfaces, making it suitable for both beginners and experienced developers.
Equipped with 2Gb DDR3 memory and an integrated FTDI FT2232H host interface, the Mimas A7 offers seamless programming capabilities without the need for expensive JTAG adapters. The board features Gigabit Ethernet and HDMI IN/OUT interfaces, enabling connectivity for high-speed data transfer and video processing tasks.
SKU: n/a -
Basic Electronic Components
NumatoLab Nereid K7 PCI Express FPGA Development Board
The NumatoLab Nereid K7 is a high-performance FPGA development board designed for a wide range of applications, from embedded systems to advanced signal processing. Featuring the AMD Kintex-7 XC7K160T FPGA in a compact FBG676 package, this board delivers exceptional processing capabilities and flexibility.
SKU: n/a -
Basic Electronic Components
NumatoLab Neso – A7 FPGA Development Board
Neso is an easy to use FPGA Development board featuring Artix 7 FPGA. It is specially designed for the development and integration of FPGA based accelerated features to other designs. This development board features Xilinx XC7A100T FPGA with FTDI’s FT2232H Dual-Channel USB device. Xilinx Artix 7 offers the best system performance per watt in class and is a great choice for cost-sensitive applications. The high-speed USB 2.0 interface provides fast and easy configuration download to the onboard SPI flash. No programmer or special downloader cable is needed to download the bitstream to the board.
SKU: n/a -
Raspberry Pi
Pi Rpi3case-bg Raspberry Pi 3 Case, White and Red
- Official case for the Raspberry Pi from the Raspberry Pi Foundation
- Removable Lid provides easy access to the camera and display ports
- Removable Side Panels with easy access to the GPIO port
- Removable Top Frame
- Designed with Pi HAT’s in mind
SKU: n/a -
Drone Parts, Flight Controller & Accessories
Pixhawk Cube Orange+ with ADS-B Carrier Board
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Power input voltage/rated input current: 4.1-5.7 V / 2.5 A
- Power-rated output/input power: 14 W
- USB port input voltage/rated input current: 4-5.7 V / 250 mA
- Servo rail input voltage: 3.3 V / 5 V
- Not waterproof. External waterproof protection is needed
- Operation Temperature: -10 °C / 55 °C
- Cube Orange+ Housing Material: CNC Aluminum Allows
- ADSB Carrier Board Housing Material: ABS Molding
SKU: n/a -
Raspberry Pi
Raspberry Pi 4 Model B 2GB Starter Kit
With the new upgrade to the Pi family, this is a complete starter kit of Raspberry Pi 2GB with all the mandatory accessories. These include products,
- Raspberry Pi 4 Model B with 2GB RAM
- USB type-C power supply
- Micro to standard HDMI cable
- Official Raspberry Pi 4 case-red-white.
- Sandisk Micro SD/SDHC 16GB Class 10 Memory Card (Upto 98MB/s Speed)
This combo has been made, keeping in mind the Raspberry Pi 4 Model B’s upgraded products so you can get it all in one go. So get it quickly and explore the world of Raspberry Pi 4.
SKU: n/a
