- Resistance: 0.03 Ω
- Power: 3 W
- Pack of 3 resistors
-31%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
0.03 Ohm 3W Surface Mount Sense Resistor (Pack of 3)
Availability:
Out of stock
It is a 0.03 Ohm 3W Surface Mount Sense Resistor. This is, in general, a low-value, high-power resistor. Ideal for all types of current sensing and pulse applications including switching and linear power supplies, instruments, power
amplifiers, shunts, power inverters, and battery management.
Package Include:
3 x 0.03 Ohm 3W Surface Mount Sense Resistor.
₹55.00 ₹80.00
Out of stock
CompareBased on 0 reviews
Be the first to review “0.03 Ohm 3W Surface Mount Sense Resistor (Pack of 3)”
Related products
-
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Basic Electronic Components, Electronic Components
MB102 830 Points Solderless Prototype PCB Breadboard
-22%
Basic Electronic Components, Electronic ComponentsMB102 830 Points Solderless Prototype PCB Breadboard
An MB102 830 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.
Features :
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Completely reusable
- Colored coordinates for easy components placement.
- Phosphor bronze nickel plated spring clips.
- Accept a variety of wire sizes 20-29 AWG
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, Uncategorized
LI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
-33%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, UncategorizedLI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.1S 3A BMS is Small size, suitable for many requirements of high integration, low cost. Lithium-Ion Battery for robotic applications. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. In this kit, there is a 1x2200mah rechargeable cell with a 1S 3.7V 3A Battery Protection Circuit. So the user can very easy to make it Battery with Protection Circuit.
Features:
- 1×3.7V 2150mAh Battery
- Low maintenance
- Long life with full capacity for up to 1000 charge cycles
- the high-accuracy voltage detection circuit
- the terminal of the charger using high voltage device
- The built-in three-stage over-current detection circuit
- MOS transistor can control the battery charge and discharge
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over-discharge voltage:2.54±0.1V
- Over-current protection: 3A
Bms solder Instructions:
- B+ connected to the battery positive.
- B- take the battery.
- P+ input to the positive battery output
- P- battery negative input output
Package Includes:
1 x Li-Ion 2150mah cell
1 x charger protection circuit
SKU: n/a -
Electronic Components
Unity DT9205a Digital Multimeter With Extra Large Display
- VERSATILE DIGITAL MULTIMETER – Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.
- TROUBLESHOOTING WITH Accuracy – This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
- ENSURES SAFETY – Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.
- EASE OF USE – Support Data Hold, low battery indicator and continuity buzzer. Includes Convenient feature like LCD Backlit Screen makes it easy to use in dimly light areas. Battery / Set of Test Leads / User Manual/ are Included.
- ADDITIONAL TIPS – This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists. (NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing)
SKU: n/a
There are no reviews yet.