- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
10RPM 12V Low Noise DC Motor With Metal Gears – Grade A
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
₹439.00 ₹639.00
Based on 0 reviews
Be the first to review “10RPM 12V Low Noise DC Motor With Metal Gears – Grade A” Cancel reply
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA Imported Dual Shaft Bo Motor With Big Wheel 4Pcs (Yellow) (Yellow)
-33%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA Imported Dual Shaft Bo Motor With Big Wheel 4Pcs (Yellow) (Yellow)
0 out of 5(0)- Plastic Material
- No batteries Battery
SKU: n/a -
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
0 out of 5(0)12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
0 out of 5(0)The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
0 out of 5(0)- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a
There are no reviews yet.