- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
-32%
Motors | Drivers | Pumps | Actuators
150RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
₹419.00 ₹619.00
Based on 0 reviews
Be the first to review “150RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A”
Related products
-
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
25pcs 3V 6V 20x15x25mm DC Motor with 8 Teeth Plastic Pinion Gear For RC Toy Hobby Motor Toys RC Car
-49%
Drone Motor, Motors | Drivers | Pumps | Actuators25pcs 3V 6V 20x15x25mm DC Motor with 8 Teeth Plastic Pinion Gear For RC Toy Hobby Motor Toys RC Car
- Motor Voltage: 3-6V
- Motor Weight: 14 grams; Motor Size: 20 x 15 x 25mm
- Motor Shaft Diameter: 2mm; Shaft Length: 9mm
- Gear Dimensions – Outside Diameter(OD) 4.7mm; Overall Length (L) 7mm; Inner Diameter (ID) 2 mm; Teeth – 8 T
- Package Include: 25 x DC Motor with 8 Teeth Gear
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
TowerPro SG90 Micro Servo Motor 9grms 180 Degree Rotation Motor for Robotics Science Project Drone, Hobby Kit Pack of 2
-65%
Drone Motor, Motors | Drivers | Pumps | ActuatorsTowerPro SG90 Micro Servo Motor 9grms 180 Degree Rotation Motor for Robotics Science Project Drone, Hobby Kit Pack of 2
- Operating voltage: 3.0V~ 7.2V
- Stall torque @4.8V : 1.2kg-cmStall torque and @6.6V : 1.6kg-cm
- Servo Plug: JR
- Constant torque throughout the servo travel range
- Excellent holding power
SKU: n/a
There are no reviews yet.