- Rating: Max 16A at 250VAC
- Switching Mode: ON-OFF-ON
- Structure: DPDT
- Panel Cut-Out: 25.2 x 21 mm
- Material: Plastic and Metal
- Colour: Black
-50%
Electronic Components
16A 250V AC DPDT ON-OFF-ON Rocker Switch
- Rating: Max 16A at 250VAC
- Switching Mode: ON-OFF-ON
- Structure: DPDT
- Panel Cut-Out: 25.2 x 21 mm
- Material: Plastic and Metal
- Colour: Black
₹64.00 ₹128.00
Based on 0 reviews
Be the first to review “16A 250V AC DPDT ON-OFF-ON Rocker Switch”
Related products
-
Batteries | Chargers and Accessories, Electronic Components
Li-Ion 18650 3.7V 2000MAH Battery-1C
-47%
Batteries | Chargers and Accessories, Electronic ComponentsLi-Ion 18650 3.7V 2000MAH Battery-1C
This Li-Ion 18650 3.7V 2000MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2000 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or it can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.Â
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape:Â Cylindrical Battery
- Battery Type:Â Lithium-Ion Battery
Application:Â
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
Package includes:
1x Li-Ion 18650 3.7V 2000MAH Battery-1C
SKU: n/a -
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Uncategorized, Basic Electronic Components, Electronic Components, IoT and Wireless
RF434 Transmitter Receiver Wireless Module
-58%
Uncategorized, Basic Electronic Components, Electronic Components, IoT and WirelessRF434 Transmitter Receiver Wireless Module
- Range in Open Space(m) : 30m
- Transmitter Frequency Range(MHz) : 433.92
- Receiver Frequency Range(MHz): 433
- Sensitivity :105 dBm
- This hybrid 433Mhz RSI Wireless Transmitter Receiver Module provides a complete RF transmitter and receiver module solution which can be used to transmit data at up to 3KHz from any standard CMOS/TTL source
SKU: n/a -
Uncategorized, Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
LI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
-33%
Uncategorized, Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.1S 3A BMS is Small size, suitable for many requirements of high integration, low cost. Lithium-Ion Battery for robotic applications. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. In this kit, there is a 1x2200mah rechargeable cell with a 1S 3.7V 3A Battery Protection Circuit. So the user can very easy to make it Battery with Protection Circuit.
Features:
- 1×3.7V 2150mAh Battery
- Low maintenance
- Long life with full capacity for up to 1000 charge cycles
- the high-accuracy voltage detection circuit
- the terminal of the charger using high voltage device
- The built-in three-stage over-current detection circuit
- MOS transistor can control the battery charge and discharge
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over-discharge voltage:2.54±0.1V
- Over-current protection: 3A
Bms solder Instructions:
- B+ connected to the battery positive.
- B- take the battery.
- P+ input to the positive battery output
- P- battery negative input output
Package Includes:
1 x Li-Ion 2150mah cell
1 x charger protection circuit
SKU: n/a
There are no reviews yet.