ATD’S HORNET:
light weight,
long endurance
390mapping drone.
no electrnoics inlcuded
-37%
DIY Kits, DIY Learning and Robot Kits, Drone Parts
Carbon fiber Drone’s frame
ATD’S HORNET:
light weight,
long endurance
390mapping drone.
no electrnoics inlcuded
₹24,500.00 ₹39,000.00
Related products
-
DIY Learning and Robot Kits
DIY Car Robot Kit – Chassis,4 x Motor,4 x Wheels and other Accessories
-27%
DIY Learning and Robot KitsDIY Car Robot Kit – Chassis,4 x Motor,4 x Wheels and other Accessories
This is a DIY 4 wheel double-layer Robot car chassis kit. It includes the four pairs of Geared Motors and Wheels. The chassis used in this kit is transparent so as to create dynamic handling of the components mounted on your robotic vehicle.
Features :
- Easy to assembling/disassembling.
- Very handy
- Transparent Car Chassis with Attractive design.
- Operating Voltage: 3-6V DC
- Bottom Plast thickness of about 3 mm
- Length: about 10 inch
- Width: about 6 inch
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed, and load capacity
- Large and stable Chassis, easy for expansion.
- Speed test encoding disk.
- When powered at 6V, this robot can reach speeds up to 0.6m/sec
- The height between two chassis can be changed by varying the length of the copper pillar
- 20 slot Speed Encoder, more accurate than other 6 or 10 slot encoders
- This kit is great for DIY Learning, Academic Research, Hobby Projects, and Robot Competitions
SKU: n/a -
Basic Electronic Components, DIY Learning and Robot Kits, Sensors
L298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
-50%
Basic Electronic Components, DIY Learning and Robot Kits, SensorsL298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
- L298N Motor Driver Controller Module is a high power motor driver for driving DC and Stepper motors. It can control upto 4 DC motors, or 2 DC motors with directional and speed control. This motor driver is for robotics and mechatronics projects. The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of standard grade rubber.
- L298N: Current Sense for each motor | Heatsink for better performance | Power-On LED indicator | Directional control | Speed control | High power motor || BO motor: Low density and inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Relatively low coefficient of friction || Wheel: Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Dimensions: L298N(LxWxH):44x44x28mm | Shaft length:7mm | Shaft Diameter:5.5mm | Motor(LxWxH):55x48x23mm | Diameter of wheel:65mm | Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The L298N motor driver is perfect for robotics and mechatronics projects. It can also be used for controlling motors from microcontrollers, switches, relays, etc. It is capable of driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc. The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65mm wheel is only compatible with BO motor.
- L298N: Input Voltage:3.2V-40V DC | L298N Dual H-Bridge DC Motor Driver | Operating voltage:DC 5V-35V | Peak Current:2Amps | Speed Control:PWM | Control Signal input voltage range:0.3V≤Vin≤1.5V (Low), 2.3≤Vin≤Vss (High) | Max. power consumption:20W (when the temperature T=75℃) || BO Motor: Operating Voltage:3 to 12V | Current (without loading):40-180mA | RPM:100 | Output Torque:0.8 kgcm | Motor Design: L-shaped || Wheel: Loading Capacity (kg):2.5 | D hole For BO Motor (mm):6
SKU: n/a -
There are no reviews yet.