- Centimeter-level positioning for industrial UAV
- 10s switch RTK mode
- 20Hz high-frequency RTK navigation refresh rate
- <10s shorter convergence time
- 2 x 9Ps modules serve as a GPS
- PX4 and Ardupilot dual-platform compatible
- Universal Type-C interface adopted on both mobile/ground end, switch freely
-1%
Flight Controller & Accessories
CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
- Centimeter-level positioning for industrial UAV
- 10s switch RTK mode
- 20Hz high-frequency RTK navigation refresh rate
- <10s shorter convergence time
- 2 x 9Ps modules serve as a GPS
- PX4 and Ardupilot dual-platform compatible
- Universal Type-C interface adopted on both mobile/ground end, switch freely
₹108,999.00 ₹109,999.00
Based on 0 reviews
Be the first to review “CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk”
Related products
-
-
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: n/a -
Flight Controller & Accessories
KK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
-54%
Flight Controller & AccessoriesKK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.Description:
Item number: KK2.1.5Size: 51mm x 51mm x 12mmWeight: 21 gram (Inc Piezo buzzer)IC: AtmegaGyro/Acc: InvenSense Inc.Auto-level: YesInput Voltage: 4.8-6.0VAVR interface: standard 6 pinSignal from Receiver: 1520us (5 channels)Signal to ESC: 1520usSKU: n/a
There are no reviews yet.