No products in the cart.
Up to 70% OFF on | Fast Delivery Across India Dismiss
Top picks this week. Up to 50% off the best selling products.
| Item Type: | Development Board |
| RAM: | 1800Kbit |
| Model Series: | Digilent |
| RAM Capacity: | 1800Kbit |
| Product | Basys 3 Artix-7 FPGA Trainer Board |
| Max. Clock Frequency (MHz) | 450 |
| Memory: | 1,800 Kbits RAM |
| Display: | 4-digit 7-segment |
| Output | 12-bit VGA |
| Switch Type |
| Item Type: | Development Board |
| RAM: | 1800Kbit |
| Model Series: | Digilent |
| RAM Capacity: | 1800Kbit |
| Product | Basys 3 Artix-7 FPGA Trainer Board |
| Max. Clock Frequency (MHz) | 450 |
| Memory: | 1,800 Kbits RAM |
| Display: | 4-digit 7-segment |
| Output | 12-bit VGA |
| Switch Type |
| Weight | 50 kg |
|---|
| Item Type: | Development Board |
| Flash Memory: | 64Mbit |
| Model Series: | Sipeed Tang |
| Memory: | 64Mbit Flash |
| Power Supply | 5 V |
| GPIO | 76 |
| Bluetooth Version: | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.004 kg |
| Item Type: | Development Board |
| Model Series: | Altera |
| Input Voltage (V): | 5 |
| Input / Output Pins | 89 |
| EEPROM chip | 4Mbit EPCS4 |
| Oscillator Frequency (MHz) | 50 |
| No. of PLLs | 2 |
| FPGA IO voltage (V) | 3.3 |
| Length (mm): | 73 |
| Width (mm): | 52 |
| Weight (g): | 27 |
| Shipping Weight | 0.03 kg |
| Item Type: | Programmer |
| Data Transfer Rate | 24 MHz |
| Connector Type: | USB Type A to B |
| Cable Type: | USB |
| Dimensions (L x W x H) mm | 107 x 52 x 20 |
| Weight (g): | 58g |
| Shipping Weight | 0.21 kg |
| Shipping Dimensions | 17 × 15 × 4 cm |
| Item Type: | Development Board |
| Model Series: | Sipeed Tang |
| Interface: | 3 PMOD interfaces, 40P pin header |
| Supported | HDMI, Gamepad, LED, SDRAM, dual DVP camera |
| Bluetooth Version: | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.056 kg |
| Shipping Dimensions | 10 × 7 × 4 cm |
| Item Type: | Development Board |
| Flash | 32Mbits NOR Flash |
| Memory: | 128M DDR3 |
| Core Architecture | Gowin GW2A-LV18PG256C8/I7 FPGA |
| Logical unit | 20,736 LUT4 units |
| SRAM | 41,472 bits distributed SRAM + 828K bits block SRAM |
| SDRAM | 128MB DDR3 external memory |
| No. of PLLs | 4 |
| Display: | 8Pins spi lcd connector |
| SD Card Slot | 1 × Push-pull SD card slot |
