For hobbyists, robot competitions, kids etc.
Size:40cm(H) x 23cm(W)
Containing the 17DOF:
1DOF of the head
4DOF of the arm
2DOF of the shoulder
2DOF of the hip
6DOF of the legs
2DOF of the feet
-60%
DIY Kits
Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG995+Servo Horn
For hobbyists, robot competitions, kids etc.
Size:40cm(H) x 23cm(W)
Containing the 17DOF:
1DOF of the head
4DOF of the arm
2DOF of the shoulder
2DOF of the hip
6DOF of the legs
2DOF of the feet
₹9,999.00 ₹25,000.00
Based on 0 reviews
Be the first to review “Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG995+Servo Horn”
Related products
-
Drone Kit
Quadcopter Drone Combo Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX flysky fsi6)
-33%
Drone KitQuadcopter Drone Combo Kit for beginner (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX flysky fsi6)
This quadcopter combo drone kit is a complete bundle for making a basic quadcopter, It includes everything to make and fly your own quadcopter. The flight controller comes with onboard LCD and buttons so all the settings can be changed from the board itself, no PC or laptop is required.
PACKAGE INCLUDES:
- 1 x  KK2.1.5 Multi-rotor LCD Flight Control Board
- 1 xF450 Quadrotor Frame with integrated PCB for easy wiring
- 4 x 30A Brushless ESC
- 2  x 1045 Propeller Pair
- 4 x A2212 1000KV Brushless Motor
- 1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone
SKU: n/a -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
-30%
Flight Controller & AccessoriesOpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
CC3D Flight Controller Hardware Features
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac, and Linux.
Direct high-speed USB support with no drivers required, a truly plug-and-play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
Software for configuration:Â Openpilot
You can also use Software for configuration:Â Librepilot
Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C
and a single serial port or dual serial ports, according to your connectivity needs.Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with a bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.The OpenPilot project, whist still young, it trying to make Open Source much more user-friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
Sensors and Components
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500HzPackage included:
1 x CC3D EVO Flight Controller And CablesSKU: n/a -
Drone Frame and Accessories
F450 Quadcopter Frame
This F450 Quadcopter Frame PCB Board is a well thought out 450mm quad frame built from quality materials. The Board is made of glass fiber. This board provides integrated PCB connections for direct soldering of your ESCs. New design PCB board version fit for standard 50mm controller board such as MK, KK, FF, MWC;
This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. It also comes with stronger moulded construction so no more board breakage at the hard landing.
Package included
- 6 x Flame Wheel(2 Red,2 White)
- 1 x F450 TOP Plate
SKU: n/a
There are no reviews yet.