- Top Selling Digital Feather Servo
- Ball Bearing-Supported Output Shaft
- Standard Programmable Digital Circuit for More Holding Power
- High Torque and High Speed
- Accurate Centering
-23%
Motors | Drivers | Pumps | Actuators
HiTec HS-5065MG High Torque Metal Gear Feather Servo
- Top Selling Digital Feather Servo
- Ball Bearing-Supported Output Shaft
- Standard Programmable Digital Circuit for More Holding Power
- High Torque and High Speed
- Accurate Centering
₹6,569.00 ₹8,569.00
Based on 0 reviews
Be the first to review “HiTec HS-5065MG High Torque Metal Gear Feather Servo”
Related products
-
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
-27%
Motors | Drivers | Pumps | Actuators200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
The 200 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
-30%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
- DC Motor – Voltage: 6V to 12V; RPM : 200; Torque Range: 5 Kg-cm
- Input supply voltage: 10V – 40VDC ; Max. Current: 10A
- 1. Connect your DC motor (or DC load) to the motor terminals as indicated. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer.
- Control power: 0.01~400W; Static current: 0.02 A (standby) PWM duty ratio:10%~100%; PWM frequency: 13 KHz
- Package include: 1 x 200 RPM DC Motor, 1 x 10A PWM
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a
There are no reviews yet.