- Length: 7mm rubber/ 4.5mm screw length
- Installation groove diameter: diameter of 2.3 mm.
- Weight: 3gm.
- On the shock-absorbing effect can be significant.
-29%
Flight Controller & Accessories
M3 Shock Absorber Screws-4pcs
- Length: 7mm rubber/ 4.5mm screw length
- Installation groove diameter: diameter of 2.3 mm.
- Weight: 3gm.
- On the shock-absorbing effect can be significant.
₹249.00 ₹349.00
Based on 0 reviews
Be the first to review “M3 Shock Absorber Screws-4pcs”
Related products
-
Flight Controller & Accessories
SpeedyBee SB-F4V3-50-STACK
You will get an STM32F405 FC (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth
for wireless configuration on the SpeedyBee app. Don’t forget about the powerful 50A 4-in-1 ESC, built with TVS
protective diode + Japan-made TDK SMT capacitors + external 1500uF low ESR capacitor, everything is for durable build and smooth flight.
Features:
- Built-in barometer for accurate height calculation
- SD Card slot can support up to 4GB Blackbox data
- Dedicated DJI Air Unit connector for a quick digital build
- Â 9V 2A + 5V 2A individual BECs
- Â 4 x UARTs for your receiver + VTX + camera + GPS.
-  Power your GPS with a USB cable – no battery needed
SKU: n/a -
Flight Controller & Accessories, FPV Antennas and Trans-Receivers
TBS Triumph Antenna FPV With SMA Male Connector-(Copy)
-33%
Flight Controller & Accessories, FPV Antennas and Trans-ReceiversTBS Triumph Antenna FPV With SMA Male Connector-(Copy)
- Connector:Â Male SMA.
- Polarization – RHCP
- Frequency Range: 5500 – 6000 MHz
- Gain: 1.26 dBic
- Axial Ratio: 0.74
- Antenna Length(mm): 82
Note: This is not an original TBS product, but a high-quality clone of one.
SKU: n/a -
Flight Controller & Accessories
Pixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
-41%
Flight Controller & AccessoriesPixhawk 2.4.8 PX4 32 Bit Flight Controller with Safety Switch and Buzzer for Drone High Quality
Characteristics:
- Compatible with Alexmos2.2 or firmware below, compatible with the newest firmware BruGi_050 German, standard Russian2.2 firmwareTips
- A new generation of strong input control 32-bit processor, a circuit board with PX4FMU + PX4IO
Specifications:
- 32-bit Pixhawk PX4 Autopilot Open Code Flight Controller V2.4.8
- 2 bit 1.32 STM32F427 flash Cortex M4, with the floating-point hardware processing unit
- 2 main frequency: 256 K, RAM 168 MHZ
- 32-bit processor STM32F103 backup co
Sensors:
- Â L3GD20 3-axis 16-bit digital gyroscope
- Â LSM303D 14/3 Axis Accelerometer Magnetometer
- MPU6000 6-axis accelerometer / magnetometer
- Â MS5611 high precision barometer
Interface:
- 5 UART 1 High Voltage compatible, 2 with hardware flow control
- 2 CAN
- DSM / DSM-XÂ Spektrum compatible satellite receiver input
- SBUSÂ input and output compatible
- PPM signal input
- RSSI (PWM or input voltage)
- I2C
- SPI
- 3.3 and 6.6 VADC inputs
- external US MICRO
Package includes:
1 XÂ 2.4.8 Pixhawk main control with shell
1 XÂ Â Safety switch
1 XÂ Buzzer
1 XÂ Memory Card
Connection Wire
SKU: n/a -
Flight Controller & Accessories
KK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
-54%
Flight Controller & AccessoriesKK2.1.5 LCD Flight Controll Board for FPV Racing Drone | e | kk flight controller
The kk 2.1.5 flight controller is next big evolution of the first generation KK flight controller boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.Description:
Item number:Â KK2.1.5Size: 51mm x 51mm x 12mmWeight: 21 gram (Inc Piezo buzzer)IC: AtmegaGyro/Acc: InvenSense Inc.Auto-level: YesInput Voltage: 4.8-6.0VAVR interface: standard 6 pinSignal from Receiver: 1520us (5 channels)Signal to ESC: 1520usSKU: n/a
There are no reviews yet.