- Voltage: 12V DC.
- Speed: 6000 RPM.
- Torque: 3.36 N-cm.
- Output Power: 19.7W.
- Rated current (mA): 3000
- Shaft diameter: 2.3 mm.
- Shaft length: 6 mm.
-40%
Motors | Drivers | Pumps | Actuators
Orange RS775 12V 6000RPM High Speed DC Motor
- Voltage: 12V DC.
- Speed: 6000 RPM.
- Torque: 3.36 N-cm.
- Output Power: 19.7W.
- Rated current (mA): 3000
- Shaft diameter: 2.3 mm.
- Shaft length: 6 mm.
₹899.00 ₹1,499.00
Based on 0 reviews
Be the first to review “Orange RS775 12V 6000RPM High Speed DC Motor”
Related products
-
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V-6V 100 Rpm Micro Metal Gear Reduction DC Motor with 30:1 IDEAL for RC Car Robot wheels DIY Toys metal gearbox Educational Electronic Hobby Kit ideal for making robots PACK OF 8
-50%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V-6V 100 Rpm Micro Metal Gear Reduction DC Motor with 30:1 IDEAL for RC Car Robot wheels DIY Toys metal gearbox Educational Electronic Hobby Kit ideal for making robots PACK OF 8
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- Rated Operating Voltage (VDC): 12, Rated Speed (RPM): 100
- Product Includes:- 2 x N20 12V 100 Rpm Micro Metal Gear Motor
- this item is delivered after quality check.
- excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motors output shaft
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
-20%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
- Rated voltage: DC3V or 4.5V, Tube size: 6mm ID x 8mm OD
- Load rated current: 0.18A, Use: diving type
- Package Included: 4x Water Pump
- Only suitable for experiments, not recommended for continuous use, if the product has any problem, please contact Gikfun customer service, we will help you to solve the problem.
- No load of water discharge capacity: 100L / H
SKU: n/a -
Motors | Drivers | Pumps | Actuators
200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
-27%
Motors | Drivers | Pumps | Actuators200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
The 200 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a
There are no reviews yet.