- Support the input channels: 8
- Output: PPM SUM × 1 / MUX × 1
- Dimensions: 28 x 19 x 5 mm OR 23 x 16 X 7
- Weight: 12 gm. (containing all the input and output wires)
Pixhawk PPM Encoder Module
- Support the input channels: 8
- Output: PPM SUM × 1 / MUX × 1
- Dimensions: 28 x 19 x 5 mm OR 23 x 16 X 7
- Weight: 12 gm. (containing all the input and output wires)
₹810.00 ₹1,010.00
Based on 0 reviews
Be the first to review “Pixhawk PPM Encoder Module” Cancel reply
Related products
-
Flight Controller & Accessories
ARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone
-36%Flight Controller & AccessoriesARDUCOPTER APM 2.8 Flight Control Board for RC Multi Rotor Drone
0 out of 5(0)This is the new APM 2.8 module. The sensors are exactly the same as with APM2.6, this version is ideal for use with multi-copters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology on the prestigious 2012 Outback Challenge UAV competition.
It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors. This revision of the board is designed for vehicles (especially multi-copters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. On fixed-wing aircraft, it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference.
APM 2.8 has an onboard compass so this is designed to be used with the 3DR uBlox GPS with Compass so that the GPS/Compass unit can be mounted further from noise sources than APM itself.
Features:
- Arduino Compatible
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
- Built-in compass
- Includes 3-axis gyro, accelerometer, and magnetometer, along with a high-performance barometer
- Straight Needle
- One of the first open-source autopilot systems to use Invensense’s 6 DOF Accelerometer/Gyro MPU-6000.
- Onboard 4 MegaByte Data flash chip for automatic data logging
- Optional off-board GPS, uBlox LEA-6H module with Compass.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
Package Include:
- 1 x APM 2.8 Flight Control Board
- 1 x Set of Female to Female jumper Cables
Note: Ardupilot and Arducopter Both identical.
SKU: n/a -
Flight Controller & Accessories
Radiolink Pixhawk Flight controller board
0 out of 5(0)Radiolink Has optimised its pixhawk flight controller PCB layout and height hold with the barometer sensor MS5611. It is a highly stable flight controller that comes from the radiolink. This controller provides more stable flight performance even at high speed. It integrated the newest 32-bit chip technology and high-end sensors, this is absolutely one of the best flight controllers for quadcopters.
Feature:
- Multi-sound buzzer interface support.
- Multiple flight modes, support for self-stability, height-set, hover, sports, freestyle, circling, following, return, guidance, automatic, and all-powerful.
- Abundant connectivity options for additional peripherals (GPS, I2C, SPI).
- 14 PWM / servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible).
- Providing a multi-sound buzzer interface.
- Multiple flight mode switches freely, Helicopter, Fixed-wing, Multi-rotor, Model Car.
- All interfaces are fully tested and accurately detected by an automatic detection system, avoiding bad interfaces leading to flight control installation unsuccessfully.
- Support DSM Spektrum receiver.
- Advanced 32-bit CortexM4 ARM high-performance processor, and 32-bit STM32STMF100 failsafe co-processor.
- Equipped with buzzer, 4G memory card, safety switch and power module.
TECHNICAL Processor 32bit 32F427 ARM Cortex M4 Core + FPU (floating point unit) Frequency 168 MHZ Memory Size 2 MB Flash RAM Size 256 KB Sensor ST Micro L3GD20H 16 bit gyroscope FLIGHT CONTROLLER Sensors MEAS MS5611 barometer Hardware Details Barometer sensor MS5611 Three-axis digital gyroscope IST8310 triaxial accelerometer(E-compass) IST8310 Six-axis accelerometer(Gyro) MPU6000 FRAM FM25V02
(256Kb)All Functions Automation Software Testing System Have SKU: n/a -
Flight Controller & Accessories
SpeedyBee SB-F4V3-50-STACK
0 out of 5(0)You will get an STM32F405 FC (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth
for wireless configuration on the SpeedyBee app. Don’t forget about the powerful 50A 4-in-1 ESC, built with TVS
protective diode + Japan-made TDK SMT capacitors + external 1500uF low ESR capacitor, everything is for durable build and smooth flight.
Features:
- Built-in barometer for accurate height calculation
- SD Card slot can support up to 4GB Blackbox data
- Dedicated DJI Air Unit connector for a quick digital build
- 9V 2A + 5V 2A individual BECs
- 4 x UARTs for your receiver + VTX + camera + GPS.
- Power your GPS with a USB cable – no battery needed
SKU: n/a
There are no reviews yet.