This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially. Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.
-38%
Basic Electronic Components, Electronic Components, PCB Adapter
SOP16 SOP28 TO DIP16 DIP28 PCB Adapter
This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that you need not buy the DIP chips for prototyping especially. Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping. It can be used repeatedly also.
Specification:
- Board Color: Yellow.
- Pitch Patch: 0.4 mm.
Package Includes:
1 x SOP16 SOP28 TO DIP16 DIP28 PCB Adapter.
2 x Burg connector.
₹50.00 ₹80.00
Based on 0 reviews
Be the first to review “SOP16 SOP28 TO DIP16 DIP28 PCB Adapter”
Related products
-
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
Li-Ion 14500 3.7V 500MAH Battery-1C
-65%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLi-Ion 14500 3.7V 500MAH Battery-1C
Li-Ion 14500 3.2V 500MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with a 500 mAh capacity. It is very convenient to install in your project to fulfill a 3.2 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or they can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape: Cylindrical Battery
- Battery Type: Lithium-Ion Battery
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
(Note: Voltage mentioned on battery may be 3.2-3.7)
Package includes:
1x Li-Ion 18650 3.2V 2000MAH Battery-1C
SKU: n/a -
Basic Electronic Components, Electronic Components, Sensors
37 In 1 Sensors Set Kit For Arduino
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product. This is the most complete performance starter kit with all the essential Arduino sensors.
FEATURES :
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
Kit list:
- 1 x Active buzzer module
- 1 x Passive buzzer module
- 1 x Common cathode RED&GREEN LED module
- 1 x Two-color common cathode LED module
- 1 x Knock sensor module
- 1 x Shock switch sensor module
- 1 x Photoresistor sensor module
- 1 x Push button module
- 1 x Tilt switch module
- 1 x RGB LED module
- 1 x Infrared transmit module
- 1 x RGB colorful LED module
- 1 x Hydrargyrum switch sensor module
- 1 x Colorful auto flash module
- 1 x Magnet-ring sensor module
- 1 x Hall sensor module
- 1 x Infrared receive sensor module
- 1 x Analogy hall sensor module
- 1 x Magic ring module
- 1 x Rotate encode module
- 1 x Light break sensor module
- 1 x Finger pulse sensor module
- 1 x Magnetic spring module
- 1 x Obstacle avoidance sensor module
- 1 x Tracking sensor module
- 1 x Microphone sensor module
- 1 x Laser transmit module
- 1 x Relay module
- 1 x Analog temperature sensor module
- 1 x 18b20 temperature sensor module
- 1 x Digital temperature sensor module
- 1 x Linear hall Sensor module
- 1 x Flame sensor module
- 1 x High sensitive voice sensor module
- 1 x Humidity sensor module
- 1 x Joystick PS2 module
- 1 x Touch sensor module
Package Includes:
1 x Sensor module board set for Arduino(37 types in total)SKU: n/a -
Uncategorized, Basic Electronic Components, Electronic Components
Multi-purpose Hot Melt Glue Sticks for Glue Gun – 1 Pcs
-40%
Uncategorized, Basic Electronic Components, Electronic ComponentsMulti-purpose Hot Melt Glue Sticks for Glue Gun – 1 Pcs
Features:
For Almost All Bonding Jobs… Trigger-Feed For Even Glue Flow.
Perfect For Home Repairs Hobbies And Crafts.
How to Use
- Plug-In Gun. Load The Glue Sticks Into The Back Of The Gun.
- Press Trigger Several Times Until The Glue Stick Is Firmly Set Into The Inlet Tube
- Allow The Glue Gun To Warm Up For Approx.5 Minutes (Depend on Glue Gun)
- Squeeze Trigger Until Glue Flows From Nozzle Some Examples Of Usage: Repair Holes In Window Screens Reattach The Float For A Tank After Its Mount Corroded Away Repair Broken Tail Light Covers On Cars Reattach Trim On Cars Reattach
Package Content:
1 x Multi-purpose Hot Melt Glue Sticks for Glue Gun
SKU: n/a
There are no reviews yet.