- Product: SpeedyBee SB-STACK-F7V3-50A
- MCU: STM32F722
- IMU(Gyro): BMI270
- USB Port Type: Type-C
- Barometer: BMP280
-20%
Flight Controller & Accessories
SpeedyBee SB-STACK-F7V3-50A
- Product: SpeedyBee SB-STACK-F7V3-50A
- MCU: STM32F722
- IMU(Gyro): BMI270
- USB Port Type: Type-C
- Barometer: BMP280
₹19,139.00 ₹24,000.00
Based on 0 reviews
Be the first to review “SpeedyBee SB-STACK-F7V3-50A”
Related products
-
Drone Parts, Flight Controller & Accessories
F4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
-31%
Drone Parts, Flight Controller & AccessoriesF4 Pro V2 V3.5 v3s Flight Control Built-in OSD / BEC
- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
SKU: n/a -
Flight Controller & Accessories
35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
-8%
Flight Controller & Accessories35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
- This is combo kit of Flight controller & ESC
- High performance & efficient flight controller & ESC
- Light weight, Easy to connect
- Compact in size
- Flight controller comes with ARM processor
- ESC is build to give best performance
SKU: n/a -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
-30%
Flight Controller & AccessoriesOpenPilot CC3D EVO Flight Controller STM32 for RC Drone FPV Racing
CC3D Flight Controller Hardware Features
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac, and Linux.
Direct high-speed USB support with no drivers required, a truly plug-and-play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.Note: Please don’t flash/Update the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
Software for configuration:Â Openpilot
You can also use Software for configuration:Â Librepilot
Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C
and a single serial port or dual serial ports, according to your connectivity needs.Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally, for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with a bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.The OpenPilot project, whist still young, it trying to make Open Source much more user-friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
Sensors and Components
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500HzPackage included:
1 x CC3D EVO Flight Controller And CablesSKU: n/a -
Flight Controller & Accessories
SpeedyBee SB-F4V3-50-STACK
You will get an STM32F405 FC (better than F411), onboard 4-level battery life indicator, 4GB Blackbox SD card slot for your flight logs, 4 groups of LED strip pads, complete with a DJI plug for your digital quad, and built-in Bluetooth
for wireless configuration on the SpeedyBee app. Don’t forget about the powerful 50A 4-in-1 ESC, built with TVS
protective diode + Japan-made TDK SMT capacitors + external 1500uF low ESR capacitor, everything is for durable build and smooth flight.
Features:
- Built-in barometer for accurate height calculation
- SD Card slot can support up to 4GB Blackbox data
- Dedicated DJI Air Unit connector for a quick digital build
- Â 9V 2A + 5V 2A individual BECs
- Â 4 x UARTs for your receiver + VTX + camera + GPS.
-  Power your GPS with a USB cable – no battery needed
SKU: n/a
There are no reviews yet.