TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC
-58%
Basic Electronic Components
TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC SMD-28 Package
TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC
₹250.00 ₹597.00
Based on 0 reviews
Be the first to review “TLC7135CDWR 1/2-Digit Precision Analog-to-Digital Converters IC SMD-28 Package”
Related products
-
Basic Electronic Components
Three Colour RGB SMD LED Module 5050 Full Color Pwm For Arduino MCU
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting resistors to prevent burnout.
Compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266.
FEATURES:
- RGB trichromatic limiting resistor to prevent burnout
- LED drive mode: Common cathode driver
- can be accessed by various microcontroller
- Through PWM adjust three colors can be blended to get a different color
Package included:
1 x Three Colour RGB SMD LED Module
SKU: n/a -
Uncategorized, Basic Electronic Components, Electronic Components
HW Battery 9V With Connector For Arduino/ Robotics
-17%
Uncategorized, Basic Electronic Components, Electronic ComponentsHW Battery 9V With Connector For Arduino/ Robotics
Features:-
-
- Model Number: 9V 6F 22.
- Battery Type: Zinc Carbon.
- Size: 6F22 006P.
- Jacket: Metal.
- Single Battery Dimensions (mm): L- 26. 5, H – 48. 5, W – 17. 5 (Max).
- Nominal Voltage(V) :9V.
- Discharge Resistance(Ω): 620.
- Cut-off Voltage(V): 5.4.
specification:-
- DIY projects.
- Electrical/Electronic projects.
- Radios.
- Multimeter.
- And many more.
Package Content:
1 x 9v battery
1 x wire with the battery connector
SKU: n/a -
-
Basic Electronic Components
RGB 3 Color LED Module For Arduino Red Green Blue
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do not need to use limiting resistors since they are already included on the board.
Features:
- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Compatible with Arduino DIY project
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Package included:
1xRGB 3 Color LED Module
SKU: n/a -
Basic Electronic Components, Sensors
Eye Blink Sensor Project Kit
The Eye-Blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a phototransistor and differentiator circuit.
This includes Arduino Nano, Eye Blink sensor, Buzzer, Battery, Clip Connector, and Switch.
Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
A Standard Active Buzzer Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This is a general 9v Battery for all your project and application needs.
A clip Connector is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
Rocker switch is Rocker Switch SPST ON/OFF Microswitch.
SKU: n/a
There are no reviews yet.