- Works on ZigBee PRO 2007 Protocol
- Serial Data Inteface : UART, SPI
- Four 10 bit ADC Inputs
- 15 I/O Ports
IoT and Wireless, xBee Zigbee module
XBee PRO S2C SMD (U.FL Antenna) Module
- Works on ZigBee PRO 2007 Protocol
- Serial Data Inteface : UART, SPI
- Four 10 bit ADC Inputs
- 15 I/O Ports
₹2,494.00 ₹2,746.00
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “XBee PRO S2C SMD (U.FL Antenna) Module” Cancel reply
Related products
-
Arducam Cameras and Accessories, IoT and Wireless
Arducam IMX219 Low Distortion M12 Mount Camera for Jetson Nano, Raspberry Pi Compute
-19%
Arducam Cameras and Accessories, IoT and WirelessArducam IMX219 Low Distortion M12 Mount Camera for Jetson Nano, Raspberry Pi Compute
0 out of 5(0)- Product: Arducam IMX219 Low Distortion M12 Mount Camera
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: 30fps@8MP, 60fps@1080p, 180fps@720
SKU: n/a -
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
0 out of 5(0)- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Arducam Cameras and Accessories, IoT and Wireless
Arducam NOIR 8MP Sony IMX219 camera module with Motorized IR cut filter M12 mount LS1820 Lens for Raspberry Pi 4/3B+/3
-11%
Arducam Cameras and Accessories, IoT and WirelessArducam NOIR 8MP Sony IMX219 camera module with Motorized IR cut filter M12 mount LS1820 Lens for Raspberry Pi 4/3B+/3
0 out of 5(0)- Sensor type: Sony IMX219 Color CMOS 8-megapixel
- Sensor size: 3.674 x 2.760 mm (1/4″ format)
- Pixel Count: 3280 x 2464 (active pixels) 3296 x 2512 (total pixels)
- Pixel Size: 1.12 x 1.12 um
- Lens: M12 customizable, telephoto to fisheye
- Angle of View: Horizontal FOV 100 degree
SKU: n/a -
Cameras, IoT and Wireless
AEROKART INDIA 2 Pack ESP32-CAM WiFi Bluetooth Camera Module evelopment Board ESP32 with Camera Module OV2640
-30%
Cameras, IoT and WirelessAEROKART INDIA 2 Pack ESP32-CAM WiFi Bluetooth Camera Module evelopment Board ESP32 with Camera Module OV2640
0 out of 5(0)- The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core
- The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
- ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
- Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
SKU: n/a



There are no reviews yet.