Recommended Products
Raspberry Pi
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: n/a
Shop
Showing 289–312 of 5361 results
-
Propellers
15pair 55mm 5cm Reverse Paddle Aircraft Propeller Blades For 720, 820 Coreless Motor Helicopter Toys Quadcopter RC Spare Parts Accessories
-24%Propellers15pair 55mm 5cm Reverse Paddle Aircraft Propeller Blades For 720, 820 Coreless Motor Helicopter Toys Quadcopter RC Spare Parts Accessories
- Length : 55mm (2.16″); Mounting hole : 1mm Motor Shaft
- Suitable for 7x20mm, 8x20mm, 8.5x20mm Coreless Motors
- Material : ABS
- Durable construction provides both lightness and rigidity.
- Package Include 15pair 55mm Propeller (15x CW & 15x CCW)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
-42%Motors | Drivers | Pumps | Actuators16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685
- Operating voltage: 2.3V to 5.5V
- 5.5V tolerant inputs
- Can operate at minus 40 degrees Celsius to 85 degrees Celsius
- Software reset feature (SWRST Call) allows the device via I2C bus reset
- 25MHz internal oscillator requires no external components
- The maximum allowable 50MHz external clock input
SKU: n/a -
Motors | Drivers | Pumps | Actuators
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
-32%Motors | Drivers | Pumps | Actuators16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: n/a -
-
-
-
-
-
-
Batteries | Chargers and Accessories
18650 2×1 Battery Cell Spacer/Holder-5Pcs.
- Model: 18650 radiating battery spacer
- Material: ABS/PC (Remarkable Flame Retardant Plastic)
- Dimension: 40 x 20 x 8 mm (LxWxH) (without lock slots).
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
Batteries, Batteries | Chargers and Accessories
18650 2500mAh 3C Lithium Ion Battery
This is a lithium-ion battery with a capacity of 2500 milliampere-hours (mAh) and a discharge rate of 3C, commonly referred to as a 18650 battery. The “18650” indicates its size: 18mm in diameter and 65mm in length. The 3C discharge rate means it can deliver current at three times its capacity.
Specification
Make India Dimension 18x65mm Current Capacity 2500mAh SKU: n/a -
Batteries | Chargers and Accessories
18650 Dual SMD/SMT High-Quality Single Battery Holder
- Lightweight and Easy to Mount on PCB
- Gold plated brass Contact Points
- Best Body Material and Build Quality
- Good environmental and Temperature resistance
- The dual cell can be used Separately or as Single cell, Holder
SKU: n/a -
Batteries | Chargers and Accessories
18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester
-18%Batteries | Chargers and Accessories18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester
- Operating Current: less than 70mA.
- Discharge voltage: 1.00V-15.00V 0.01V resolution.
- Termination voltage range: 0.5-11.0V.
- Supported by current: 3.000A 0.001A resolution.
- Maximum voltage measurement error: 1% + 0.02V.
- Maximum current measurement error: 1.5% + – 0.008A.
SKU: n/a -
Batteries | Chargers and Accessories
18650 Single Battery Cell Spacer/Holder-6Pcs.
- Model: 18650 radiating battery spacer
- Material: ABS/PC (Remarkable Flame Retardant Plastic)
- Dimension: 20 x 20 x 8 mm (LxWxH) (without lock slots)
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
-