Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 3673–3696 of 6090 results
-
Basic Electronic Components
MCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC DIP-8 Package
-62%
Basic Electronic ComponentsMCP3201-CI/P 12-Bit A/D Converter (ADC) with SPI Interface IC DIP-8 Package
The MCP3201-CI/P 12-Bit A/D Converter analog-to-digital converter (ADC) designed for precision measurement applications. Featuring an on-board sample and hold circuit, it allows for accurate conversions from a single-ended input. This ADC supports SPI communication for easy integration with microcontrollers, providing a sampling rate of up to 100 ksps at a clock rate of 1.6 MHz. With a wide operating voltage range of 2.7V to 5.5V, it ensures flexibility for various power supply setups. The device is optimized for low power, consuming only 500nA in standby mode and 300μA during active conversion, making it ideal for battery-powered and low-energy applications
Features :
12-bit Resolution: Provides high accuracy in analog-to-digital conversions.
On-chip Sample and Hold: Captures and holds the input signal for accurate conversions.
Single-Ended Input: Supports single-ended analog inputs for flexibility.
SPI Communication: Easy integration with microcontrollers via SPI interface.
Sampling Rate: Up to 100 ksps at 1.6 MHz clockSKU: n/a -
Basic Electronic Components
MCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
-60%
Basic Electronic ComponentsMCP3202-BI/P 12-Bit Dual Channel A/D Converter (ADC) with SPI Interface IC DIP-8 Package
The MCP3202-BI/P 12-Bit P is a 12-bit analog-to-digital converter (ADC) with SPI serial interface and on-board sample-and-hold circuitry. It is designed for applications such as sensor interface, process control, and data acquisition, especially in battery-operated systems. The MCP3202-BI/P 12-Bit offers programmable analog inputs, allowing for either single-ended or pseudo-differential pairs. It operates over a wide voltage range and offers a low-power design for efficient performance.
Features :
- Single-ended or pseudo-differential inputs
- On-chip sample-and-hold
- Low power consumption: Standby current 0.5µA
- Operating voltage range: 2.7V to 5.5V
- Throughput rate: Up to 100 ksps
- Gain error: ±1.25 LSB (typical)
- Operating temperature: -40°C to +85°C
SKU: n/a -
Basic Electronic Components
MCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package
-62%
Basic Electronic ComponentsMCP3208 12-Bit 8-Channel A/D Converter (ADC) with SPI Interface IC DIP-16 Package
The MCP3208 12-Bit 8-Channel is a 12-bit ADC with SPI interface and 8 channels for analog inputs. It features a sampling rate of 100 ksps, and operates with a supply voltage range of 2.7V to 5.5V. This ADC offers a resolution of 12 bits, with integral nonlinearity (INL) of 1 LSB, and provides an output voltage of 4.1V. MCP3208 12-Bit 8-Channel A is ideal for applications requiring high-resolution, low-power signal conversion.
Features :
- 12-bit resolution
- 8 analog input channels
- Sampling rate: 100 ksps
- SPI interface
- Operating voltage: 2.7V to 5.5V
- Temperature range: -40°C to +85°C
SKU: n/a -
Basic Electronic Components
MCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
-57%
Basic Electronic ComponentsMCP3208-CI/P-MICROCHIP-MCP3208-CI/P-Analogue to Digital Converter, 12 bit, 100 kSPS, Pseudo Differential, Single Ended, Serial, SPI
The MCP3208-CI/P is an 8 channel, 12bit Analogue to Digital Converter (ADC) with SPI interface in 16 pin DIP package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3208 features successive approximation register (SAR) architecture with onboard sample and hold circuitry allowing 12bit ADC capability to be added to any PIC microcontroller. It is programmable to provide four pseudo differential input pairs or eight single ended inputs. Differential nonlinearity (DNL) is specified at ±1LSB and integral nonlinearity (INL) is ±2LSB. Communication with devices is accomplished using simple serial interface compatible with SPI protocol. Low current design permits operation with typical standby and active currents of only 500nA (2μA maximum) and 320μA (400μA maximum) respectively.
Specifications:
Operating Temperature Min: -40°C
No. of Pins: 16Pins
Product Range: Octal 12-Bit SAR ADCs
Operating Temperature Max: 85°C
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
Data Interface: Serial, SPI
Sampling Rate: 100kSPS
Supply Voltage Type: Single
Resolution (Bits): 12bit
Input Channel Type: Pseudo Differential, Single EndedSKU: n/a -
Basic Electronic Components
MCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology
-51%
Basic Electronic ComponentsMCP3421A0T-E/CH – 18-Bit Analog-to-Digital Converter I2C Interface On-Board Reference 6pin SOT-23 Microchip Technology
the Microchip Technology MCP3421A0T ADC in an SOT-23 package is an 18-bit analog-to-digital converter designed for low-power applications. With a single channel and 3.75 S/s sampling rate, this device operates with a reference voltage of 2.048 V and supports I2C/serial/2-wire interfaces. It operates within a 2.7V to 5.5V supply range, consumes only 155 µA of current, and has an operating temperature range from -40°C to 125°C.
Features :
Resolution: 18 bits
Channels: 1
Interface: I2C, Serial, 2-Wire
Supply Voltage: 2.7V to 5.5V
Reference Voltage: 2.048V
Power Consumption: 155 µA
Sampling Rate: 3.75 S/s
Operating Temp Range: -40°C to 125°CSKU: n/a -
Basic Electronic Components
MCP3425A0T-E/CH-MICROCHIP-MCP3425A0T-E/CH-Analogue to Digital Converter, 16 bit, 15 SPS, Differential, I2C, Single, 2.7 V
-40%
Basic Electronic ComponentsMCP3425A0T-E/CH-MICROCHIP-MCP3425A0T-E/CH-Analogue to Digital Converter, 16 bit, 15 SPS, Differential, I2C, Single, 2.7 V
MCP3425 is a single channel low-noise, high accuracy ΔΣ A/D converter with differential inputs. Typical applications include portable instrumentation , weigh scales and fuel gauges, temperature sensing with RTD, thermistor and thermocouple, bridge sensing for pressure, strain and force.
Specifications:
Operating Temperature Min: -40°C
No. of Pins: 6Pins
Product Range: Single 16-Bit Sigma-Delta ADCs
Operating Temperature Max: 125°C
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: SOT-23
Data Interface: I2C
Sampling Rate: 15SPS
Supply Voltage Type: Single
Resolution (Bits): 16bit
Input Channel Type: DifferentialSKU: n/a -
Basic Electronic Components
MCP41100-I/SN-MICROCHIP-Volatile Digital Potentiometer, 100 kohm, Single, Serial, SPI, Linear, 2.7 V
-60%
Basic Electronic ComponentsMCP41100-I/SN-MICROCHIP-Volatile Digital Potentiometer, 100 kohm, Single, Serial, SPI, Linear, 2.7 V
MCP41100-I/SN is a single digital potentiometer with SPI™ interface. The wiper position of varies linearly and is controlled via an industry-standard SPI interface. The devices consume 1µA during static operation. A software shutdown feature is provided that disconnects the “A” terminal from the resistor stack and simultaneously connects the wiper to the “B” terminal. The wiper is reset to the mid-scale position (80h) upon power-up. The RS (reset, active low) pin implements a hardware reset and also returns the wiper to mid-scale.
Features:
- 256 taps for each potentiometer
- Potentiometer values for 10 kΩ, 50 kΩ and
100 kΩ - Single and dual versions
- SPI™ serial interface (mode 0,0 and 1,1)
- ±1 LSB max INL & DNL
- Low-power CMOS technology
- 1 µA maximum supply current in static operation
- Multiple devices can be daisy-chained together
(MCP42XXX only) - The shutdown feature opens circuits of all resistors for
maximum power savings - Hardware shutdown pin available on MCP42XXX
only
SKU: n/a -
Basic Electronic Components
MCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
-61%
Basic Electronic ComponentsMCP4802-E/P 8 Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
The MCP4802 device is dual 8-bit, 10-bit and 12-bit buffered voltage output Digital-to-Analog Converters (DACs), respectively. The devices operate from a single 2.7V to 5.5V supply with SPI-compatible Serial Peripheral Interface.
The device has a high precision internal voltage reference (VREF = 2.048V). The user can configure the full-scale range of the device to be 2.048V or 4.096V by setting the Gain Selection Option bit (gain of 1 of 2). Each DAC channel can be operated in Active or Shutdown mode individually by setting the Configuration register bits. In Shutdown mode, most of the internal circuits in the shutdown channel are turned off for power savings, and the output amplifier is configured to present a known high resistance output load. The devices include double-buffered registers, allowing synchronous updates of two DAC outputs using the LDAC pin. These devices also incorporate a Power-on Reset (POR) circuit to ensure reliable powerup. The devices utilize a resistive string architecture, with its inherent advantages of low DNL error, low ratiometric temperature coefficient, and fast settling time. These devices are specified over the extended temperature range (+125°C).
The device provides high accuracy and low noise performance for consumer and industrial applications where calibration or compensation of signals (such as temperature, pressure, and humidity) are required. The MCP4802/4812/4822 devices are available in the PDIP, SOIC, and MSOP packages.
Application:
- SetPoint or Offset Trimming
- Sensor Calibration
- Precision Selectable Voltage Reference
- Portable Instrumentation (Battery-Powered)
- Calibration of Optical Communication Devices
SKU: n/a -
Basic Electronic Components
MCP4921 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
-34%
Basic Electronic ComponentsMCP4921 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package
The MCP4921 is a 12-bit Digital-to-Analog Converter (DAC) from Microchip Technology, featuring a voltage output and SPI interface. It supports both unipolar and bipolar output polarities and has a settling time of 4.5 μs. The device operates with a supply voltage of 2.7V to 5.5V and provides low power consumption with a nominal current of 175 μA. It has a maximum operating temperature of 125°C and comes in a lead-free PDIP-8 package, ideal for various industrial applications.
Features :
- Resolution: 12-bit
- Output Type: Voltage output (unipolar/bipolar)
- Interface: SPI (Serial Peripheral Interface)
- Settling Time: 4.5 μs
- Supply Voltage: 2.7V to 5.5V
- Nominal Supply Current: 175 μA
- Operating Temperature Range: -40°C to 125°C
SKU: n/a -
Basic Electronic Components
MCP4922 12-Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-14 Package
-59%
Basic Electronic ComponentsMCP4922 12-Bit Dual Voltage Digital to Analog Converter (DAC) with SPI Interface IC DIP-14 Package
The MCP4922-E/P is a 12-bit, dual-channel Digital-to-Analog Converter (DAC) with an external voltage reference. It features low power consumption (350µA typical), high accuracy (INL ±2 LSB, DNL ±0.75 LSB), and low noise performance. The device uses an SPI interface for communication and offers rail-to-rail output. Key features include a 4.5µs output settling time, simultaneous latching of both DACs via the LDAC pin, selectable unity or 2x gain output, and external multiplier mode, making it ideal for applications like set point control, offset adjustment, and sensor calibration.
Features :
- Resolution: 12-bit
- Data Interface: 3-wire, Serial
- Case Style: DIP (Dual In-line Package)
- Input Channel Type: Serial
- Operating Temperature: -40°C to 125°C
- Supply Voltage Range: 2.7V to 5.5V
- Number of Pins: 14 Pins
SKU: n/a -
-
Basic Electronic Components
MCU-Micro USB Breadboard 5V Power Supply Module
MCU-Micro USB Breadboard 5V Power Supply Module 5Pin Female Connector B type PCB Converter. This breakout board is great for interfacing USB Signals with your custom designed microcontroller boards. It also is useful if all you want is access to 5V USB power for your prototype circuits such as breadboards, perforated boards or Vero boards.
Note: This board comes with unsoldered header pin.
Pinouts:
- VCC: 5V Power Supply
- D- : USB D- Signal
- D+: USB D+ Signal
- ID: USB Identifier Signal for OTG Devices
- GND: Power Ground
SKU: n/a -
Motors | Drivers | Pumps | Actuators
MD13S 13Amp DC Motor Driver – GROVE Compatible
-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
SKU: n/a -
-
Basic Electronic Components
ME-8104 Rotary Adjustable Roller Mini Limit Switch
ME-8104 Rotary Adjustable Roller Mini Limit Switch
The ME-8104 Rotary Adjustable Roller Mini Limit Switch, often referred to as the POSITION SWITCH, is a widely used small current electrical component. Its activation occurs through the contact made by moving parts in production machinery or segmented control circuits, thus fulfilling specific control purposes.
It is predominantly employed as an electrical control switch in mechanical and other industrial fields. The Limit Switch is adept at monitoring the positions of moving parts in machinery and installations, crucial for precise control and safety across various devices.
When deploying this switch, it is critical to consider the Voltage Rating and ensure it matches the voltage standards of your area to guarantee the Limit Switch’s optimal functionality.
Features:
- Actuator action: momentary.
- Actuator-type rotary adjustable lever arm with a roller.
SKU: n/a -
Basic Electronic Components
ME-8108 Rotary Adjustable Roller Lever Arm Mini Limit Switch
ME-8108 Rotary Adjustable Roller Lever Arm Mini Limit Switch
The ME-8108 Rotary Adjustable Roller Lever Arm Mini Limit Switch, also known as a POSITION SWITCH, is a commonly employed electrical device used in various industries. It functions by activating the contacts through collisions with moving parts in production machinery or segmented control circuits, thereby achieving specific control objectives.
Featuring a lever arm that can be rotated up to 90° degrees to the left and right, this limit switch is ideal for mechanical and industrial applications requiring precise control. It serves as an effective means to monitor the position of moving parts in machines and plants, ensuring optimal operation and safety.
It’s important to note the Voltage Rating of the limit switch and ensure compatibility with the voltage requirements of your location to ensure proper functionality. With its versatile design and reliable performance, the ME-8108 Limit Switch is a valuable component in any control system.
Features:
- Actuator action: momentary.
- Actuators type rotary adjustable lever arm with a roller.
- Contact configuration 2 NC 2 NO.
- IP Rating: IP66
SKU: n/a -
Basic Electronic Components
ME-8112 Rotary Adjustable Roller Mini Limit Switch
ME-8112 Rotary Adjustable Roller Mini Limit Switch
The ME-8112 Rotary Adjustable Roller Mini Limit Switch, also known as the POSITION SWITCH, is a compact and versatile electrical device commonly used in industrial applications. It detects the movement or position of machinery components and activates the control circuit to perform specific control functions.
This limit switch is ideal for use as an electrical control switch in a wide range of mechanical and industrial sectors. It efficiently monitors the position of moving parts in machines and equipment. To ensure proper operation, it is important to verify that the voltage rating matches the local voltage supply.
Features:
- Actuator action: momentary.
- Actuator-type rotary adjustable lever arm with a roller.
- Contact configuration 2 NC 2 NO(SPDT).
Specifications:
- Model: ME-8112
- Voltage Rating: 5A/380V AC, 10A/250V AC
- Actuator action: Momentary
- Actuator Type: Parallel Roller Plunger
- Contact Type: 2NC 2NO(SPDT)
- Material: Resin, Plastic, Metal
- Roller Wheel Size: 12.5 x 3.8mm
- Mount Screw Hole Diameter: 5mm
- Mount Screw Hole Distance: 21 x 56mm
- Total Size: 113 x 29 x 25mm
- Weight (gm): 120
SKU: n/a -
Basic Electronic Components
ME-8122 Rotary Adjustable Roller Mini Limit Switch
ME-8122 Rotary Adjustable Roller Mini Limit Switch
Presenting the ME-8122 Rotary Adjustable Roller Mini Limit Switch, often known as a POSITION SWITCH, designed for precise control and monitoring of moving parts in various machines and facilities. This small and reliable limit switch is perfectly suited for use in electrical control systems across mechanical and other industrial fields.
Features:
- Actuator Action: Momentary
- Actuator Type: Rotary adjustable lever arm with a roller
- Cross Roller Plunger
- Automatic Reset
SKU: n/a -
Basic Electronic Components
ME-8166 Rotary Adjustable Roller Mini Limit Switch.
The ME-8166 Rotary Adjustable Roller Mini Limit Switch, often known as the POSITION SWITCH, is a frequently used electrical device for small current applications. It interacts with the moving parts of production machinery or a control circuit via contact, achieving a designated control function.
This Limit Switch is ideal for use as an electrical control switch in mechanical and various industrial settings. It can track the positions of moving parts in machinery and equipment. Before utilizing the Limit Switch, verifying the Voltage Rating for compatibility with your local voltage is crucial.
Features:
-
-
- The actuator is activated only when pressed. It has a rotary lever arm with a roller that can be adjusted. It has two normally closed and two normally open contacts. It is dust-tight and water-resistant with an IP rating of 66.
-
Specifications:
-
- Model: ME-8166
- Voltage Rating: AC380V, 6(2)A, AC250V, 10(4)A
- Actuator action: Momentary
- Material: Resin, Plastic, Metal
- Roller Dimension: 1.8 x 0.7cm
- Body Dimension: ~88 x 28 x 25mm
- IP Rating: IP66
SKU: n/a -
-
Basic Electronic Components
ME-8169 Rotary Adjustable Roller Mini Limit Switch
The ME-8169 Rotary Adjustable Roller Mini Limit Switch, often known as the POSITION SWITCH, is a commonly used electrical device for small currents. It operates by detecting contact with moving parts of production machinery or segmented control circuits, thus achieving certain control objectives.
This Limit Switch is ideal for serving as an electrical control switch in mechanical and various industrial fields. It can monitor the positions of moving parts of machines and components in plants across diverse equipment. It is essential to note the Voltage Rating, which must match the voltage in your locality to ensure the Limit Switch functions properly.
Features:
- The actuator is activated only when pressed and released.
The actuator has a rotary lever arm that can be adjusted in length and angle, and a roller at the end of the arm.
The actuator is dust-tight and resistant to powerful water jets.
IP Rating: IP66
SKU: n/a - The actuator is activated only when pressed and released.
-
Basic Electronic Components
ME-9101 Rotary Adjustable Roller Mini Limit Switch
The ME-9101 Rotary Adjustable Roller Mini Limit Switch, commonly referred to as the POSITION SWITCH, is a widely utilized small current main electrical device. It triggers the contact action by interacting with the moving components of production machinery or a segmented control circuit to fulfill a specific control purpose.
This Limit Switch is perfectly suited for use as an electrical control switch in mechanical and other industrial sectors. It is capable of monitoring the positions of moving machine parts and plant equipment. It is crucial to check the Voltage Rating to confirm compatibility with the voltage in your area to ensure the proper functioning of the Limit Switch.
Features:
- The actuator is activated only when pressed and released. The actuator has a rotary lever arm that can be adjusted in length and angle, and a roller at the end. The actuator has four contacts: two normally closed and two normally open. The actuator is dust-tight and water-resistant.
SKU: n/a -
Basic Electronic Components
Mechanical Endstop Switch with Cable for 3D Printers
CNC 3D Printer Mech Endstop Switch uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin 100″ pitch header and accepts a standard, old-style CD-ROM audio connector cable.
The mechanical endstop is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum. Instead of messing with flags or complicated light beam interruption, we use a mechanical switch.
If we place the switch in the path of the stage, then the stage itself will simply close the switch when it moves against it. Other than properly positioning the switch, we do not need to modify the stage at all. If you’re worried about reliability, you can sleep well at night. The switches we use are rated for 1 million operations before failure. Since we only use the switches once per print, that means you’ll be able to do one million prints before having to replace the switch
Connection description:
- Redline: connecting VCC (ramps of +)
- Black line: connecting GND (ramps of -)
- Green Line: connecting SIGNAL (ramps in s)
Features
- Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
- Quality switching elements.
- Customized high-quality connection wires using 22AWG copper wire with ratings of current 2A, 300V voltage.
- An insulating layer over a wide range of temperatures, up to 80 degrees.
SKU: n/a -
Development Boards
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-5%
Development BoardsMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
SKU: n/a -
-
Development Boards
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: n/a
