Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 3793–3816 of 6090 results
-
-
-
Basic Electronic Components
MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder
The all New MKS MOSFET Heating Controller for 3D Printer heat Bed/Extruder module exceed 30A Current limit than that of its previous version and hence it supports big current to provide More power, more stable than the previous version, not easy to burn.
The modules come with Superior performance of MOS (Max 280A), Extra large heat sink, and therefore it can give a wide range of operating maximum current can be up to 30A or more. With this Controller, you Can use hot-bed output signal of Ramp1.4 and MKS series to control and can use the digital signal of 5-24v to control.
Usage :
- Plug a power supply.
- Connect to the heated bed.
- Connect a digital control signal to GND, D8 of MKS MINI.
- Connect to the heated bed signal on Ramps1.4 or MKS series controller boards.
SKU: n/a -
Development Boards
MLSoCâ„¢ DevKit 2.0
• On-bench: PCIe edge connector covered in protective coating and four footings to board, USB connector to provide power for stand-alone operation on a bench
• In PC: PCIe form factor (68.9mm x 160mm) with standard 98-pin PCB edge connector to interface with any standard host PC or motherboard. Bracket to assist in securing to PC included as option.
• Low Power: Typical workloads 10-15W. Supports PCIe Gen 4.0 up to x8 lanes, LPDDR4 x4, I2C x2, eMMC, µSD card, QSPI-8 x1, 1G Ethernet x2 ports via RJ45, UART x1, and GPIO interfaces. • Machine Learning Accelerator (MLA): Provides up to 50 Tera Ops Per Second (50 TOPS) for neural network computation.
• Application Processing Unit (APU): A cluster of four ARM Cortex-A65 dual threaded processors operating up to 1.15 GHz to deliver up to 15K Dhry stone MIPs that eliminates the need for an external CPU processor.
• Video Encoder/Decoder: Supports the H.264 compression standards HEVC (High Efficiency Video Coding) with support for baseline/main/high profiles, 4:2:0 pixels and 8-bit precision. The encoder supports rates up to 4K P30, while the decoder supports up to 4K P60.
• Computer Vision Unit (CVU): Consists of a four core Synopsys ARC EV74 video processor supporting up to 600 16-bit GOPS.
• Designed to offer the highest performance for low power embedded edge machine learning applications.
SKU: n/a -
-
-
Batteries | Chargers and Accessories
Mobile Power Boost DIY 18650 Lithium Battery Digital Dual USB
-20%
Batteries | Chargers and AccessoriesMobile Power Boost DIY 18650 Lithium Battery Digital Dual USB
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface).
- Batteries Type: liquid lithium-ion batteries (18650) 3.7Â lithium-ion batteries only.
- Screen size: 27mm x 17mm.
- Charging voltage input: 5V-6V 1A.
- Step-up voltage output: 5V 1A/2.1A (Dual output, Total 2.5A).
SKU: n/a -
-
Batteries | Chargers and Accessories
Monex 15V 3.2A Power Adapter with DC Plug
- Suitable for DIY & Hobby Kits, Home, Medical, and Military Appliances.
- Rated Input AC Voltage 100v-240v
- It comes with a 1 meter long 24 AWG cable
- Stabilized DC Output with Low Ripples & Interference
- Short Circuit & Overload Protection
- High Efficiency & Low Energy Consumption
- RoHS and BIS compliance Approved.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Monster Moto Shield VNH3SP30 Motor Driver 14A (Peak 30A)
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 34 mΩ
- Maximum PWM frequency: 10 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Motor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
-32%
Motors | Drivers | Pumps | ActuatorsMotor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1
SKU: n/a -
-
Sensors
MPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
-18%
SensorsMPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
- Acceleration and Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 6 DOF modules
SKU: n/a -
Sensors
MPU9250 9-Axis Attitude Gyro Accelerometer Magnetometer Sensor Module-(Made in India)
- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
SKU: n/a -
-
Sensors
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases.
SKU: n/a
