Recommended Products
Raspberry Pi
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72Â Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: n/a
Shop
Showing 4609–4632 of 6097 results
-
Basic Electronic Components
Pneumatic Coupler Air Connectors PC4-M5 4MM Straight Fitting For PTFE Bowden Tube 3D Printer
-50%
Basic Electronic ComponentsPneumatic Coupler Air Connectors PC4-M5 4MM Straight Fitting For PTFE Bowden Tube 3D Printer
Pneumatic Coupler Air Connectors PC4-M5 4MM Straight Fitting For PTFE Bowden Tube 3D Printer push to connect fitting for 4mm OD tubing, M5x0.8 thread. This item is often used in 3d printers to connect Bowden tubing to the extruder and to the hot end.
ThePneumatic Coupler Air Connectors PC4-M5 4MM Straight Fitting For PTFE Bowden Tube 3D Printer is designed for polyurethane or nylon tubing. Made of nickel plated brass for corrosion resistance. Even after installation, the direction of the tube can be changed freely.
Oval release ring assists to connect the hose easily by manual, without special tools required. Outside (and inside available) hexagon wrench.
Features:
- The tube fitting comes in a wide variety of tube and thread sizes.
- Even after installation, the direction of the tubing can be changed freely.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8256E Single Brushed DC Motor Driver Carrier
- built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature
- simple two-pin speed direction interface
- Under-voltage lockout and protection against over-current and over-temperature
- Simple interface requires only two I/O lines (one for direction and another for speed)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8835 Dual Motor Driver Carrier
- Under-voltage lockout on the logic supply and protection against over-current and over-temperature
- Reverse-voltage protection on the motor supply
- Compact size (0.7″×0.4″) with the form factor of a 14-pin DIP package
- Inputs are 3V- and 5V-compatible
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8838 Single Brushed DC Motor Driver Carrier
- Reverse-voltage protection on the motor supply
- H-bridge motor driver: can drive one DC motor
- Motor supply voltage: 0Â V to 11Â V
- Logic supply voltage: 1.8Â V to 7Â V
- easy to use with standard solderless breadboards
SKU: n/a -
-
-
Motors | Drivers | Pumps | Actuators
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: n/a -
Drone Kit
Power Distribution Board 100A / PDB Capable of 100A/Compatible up to Octocopter Configuration/Circle Shape with a 35 mm Radius. / Material- Glass Fiber
-30%
Drone KitPower Distribution Board 100A / PDB Capable of 100A/Compatible up to Octocopter Configuration/Circle Shape with a 35 mm Radius. / Material- Glass Fiber
- PDB 100A is compatible up to configurations.
- FMU PWM OUT, I/O PWM OUT
- It can connect 1-8 ESCs, It can handle up to 100 amps.
- It is a Circle shape with a 35 mm radius.
- Its weight is 17g, Its Material is glass fiber
SKU: n/a -
DRONE COMBO, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories
Power Distribution Board 200A / PDB Capable of 200A Current Carrying Capacity for 14S LiPo Battery / 5V/12V BEC/Four XT90 Connectors/Current Measurement Sensor (up to 200A)
-5%
DRONE COMBO, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & AccessoriesPower Distribution Board 200A / PDB Capable of 200A Current Carrying Capacity for 14S LiPo Battery / 5V/12V BEC/Four XT90 Connectors/Current Measurement Sensor (up to 200A)
- Capable of handling high current (up to 200A), Anti-spark soft switching for inductive loads
- Input voltage up to 15-60V (12S), 4x XT90 connectors (50A each for ESC with motor)
- Analog battery voltage and current sensors output for flight controllers and robotic applications
- DC-DC converter from 15-60V input (up to 12S battery) to 5V 5A output, DC-DC converter from 15-48 V input (up to 12S battery) to 12V 5A output
- 5V and 12V power output terminals (standard 2.54mm/0.1″ connectors), Power output for flight controller (for eg., Pixhawk, Cube Orange)
SKU: n/a -
-
DRONE COMBO, Drone Kit, Drone Parts
Premium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
-38%
DRONE COMBO, Drone Kit, Drone PartsPremium Hexacopter Drone Combo Set with Pixhawk For Flower Dropping Drone
1 x Pixhawk 2.4.8 Flight controller with accessories
1 x FlySky FS-i6 2.4G 6CH AFHDS Transmitter With FS-iA6B Receiver for RC FPV Drone
1 x DJI F550 Frame
1 x Landing Gear
6 x Readytosky 920kv motor(3cw + 3ccw)
6 x BLHeli LittleBee 30A ESC (OPTO) 2-6SLipo
1 x power module for Pixhawk
1 x Ubolx neo M8N gps
1 x GPS stand|
3 x 1045 Carbon fiber propeller
1 x Mg996 metal gear servo
1 x Lm2596 power supply for servo
1 x Shock absorberSKU: n/a -
Development Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: n/a -
Development Boards
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: n/a -
Basic Electronic Components
Pro-Range PLA wood Filament 1.75mm 1 kg Spool-wood
The wood series uses PLA as the base material and is filled with a certain proportion of wood powder or wood fiber.The printed products can show a realistic wood effect
Features:
- 1.75mm diameter for consistent extrusion.
- Suitable for professional-quality prints.
- High-impact resistance and durability.
SKU: n/a -
Drone Transmitter and Receiver
Product: MINI XF5805 5.8G Transmitter Output power @transmission distance: 0.5km@25mW, 1km@200mW, 2km@600mW Frequency point: 37CH Video format: NTSC/PAL Input voltage: 7V~26V
-25%
Drone Transmitter and ReceiverProduct: MINI XF5805 5.8G Transmitter Output power @transmission distance: 0.5km@25mW, 1km@200mW, 2km@600mW Frequency point: 37CH Video format: NTSC/PAL Input voltage: 7V~26V
- Operating Voltage (VDC):7.4-12 V
- No of channels:12
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
SKU: n/a
