Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 4897–4920 of 6097 results
-
Basic Electronic Components
Right Side MK8 extruder Aluminum 3D Printer Block
Right Side MK8 extruder Aluminum 3D Printer Block
This product is an MK8 Extruder Replacement Aluminum Alloy Block. It can be used to replace an extruder that is blocked or damaged. The product comes as a kit that the user needs to assemble. There are many assembly instructions and videos online that can help with this process.
The MK8 Extruder has three different types: Right Side, Left Side and Right Short. These types indicate the direction of the filament extrusion relative to the block. For single extruders, any type is suitable. For dual extruders, one right side and one left side are needed.
Specifications and Features:
- Right Short Side MK8 Extruder
- High-Quality Replacement for your blocked/damaged MK8 Extruder
- Available in 3 different types to support dual extruder setup.
- Material: Aluminum alloy
- Weight: 60gm
SKU: n/a -
Basic Electronic Components
Right Side MK8 extruder Aluminum 3D Printer Block
Right Side MK8 extruder Aluminum 3D Printer Block
This product is an MK8 Extruder Replacement Aluminum Alloy Block. It can be used to replace an extruder that is blocked or damaged. The product comes as a kit that the user needs to assemble. There are many assembly instructions and videos online that can help with this process.
The MK8 Extruder has three different types: Right Side, Left Side and Right Short. These types indicate the direction of the filament extrusion relative to the block. For single extruders, any type is suitable. For dual extruders, one right side and one left side are needed.
Specifications and Features:
- Right Short Side MK8 Extruder
- High-Quality Replacement for your blocked/damaged MK8 Extruder
- Available in 3 different types to support dual extruder setup.
- Material: Aluminum alloy
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Robot Manipulator Mechanical Arm Metal claws
- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Robot Manipulator Mechanical Arm Metal Claws Normal Quality
-19%
Motors | Drivers | Pumps | ActuatorsRobot Manipulator Mechanical Arm Metal Claws Normal Quality
- The degree of Freedom (DOF): 2
- Claw material: aluminum alloy
- Claw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed claw)
- Claws overall width: 98mm (maximum overall width of the claw when open)
- Claw maximum opening angle: 55mm
SKU: n/a -
-
-
Sensors
RP LIDAR A3M1 360°Laser Range Scanner-25 Meter Range
- Ranging 16000 Times per Second
- 25 Meters Range Radius
- Indoor and Outdoor Availability
- 360 Degree Omnidirectional Laser Range Scanning
- 4 Centimeters Ultra-thin
- Brushless Motor, Low Noise, New Non-contact Drive
- OPTMAG Original Design, 5 Years Ultra-long Life
- The RPLIDAR A3 system adopts the low power infrared laser Light
SKU: n/a -
Development Boards
RP2040 Microcontroller IC by Raspberry PI
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Development Boards
RP2040 Microcontroller IC by Raspberry PI
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Development Boards
RP2040 Microcontroller IC by Raspberry PI REEL of 500
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Raspberry Pi
RP2040 Microcontroller IC by Raspberry PI-REEL of 100
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate the core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
SKU: n/a -
Sensors
RPLiDAR A1M8 360 Degree Laser Range Finder – 6m (Radius Range)
- Distance Range (Radius): 0.15m to 6m, white objects (Diameter Range – 12m)
- Angular Range: 0 ~ 360º
- Distance Resolution: < 0.5mm
- Angular Resolution: <= 1 º
- Sample Duration: 0.5 ms
- Sample Frequency: >=8000 Hz
- Scan Rate: 1 ~ 10Hz, Typical 5.5Hz
SKU: n/a -
Sensors
RPLiDAR S1 Portable ToF Laser Scanner Kit – 40M Range
- Distance Range(On Black Objects):10m
- Distance Range(On White Objects):40m
- Sample Rate: 9200 times per second
- Sample Frequency: Typical value: 10Hz (the frequency is adjustable within the 5-15Hz range.
- Distance Resolution:1cm
- Band Rate: 256000bps
SKU: n/a
