Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5569–5592 of 6089 results
-
Basic Electronic Components
Teflon Tubing – For 3D Printers 1.75mm Filament 1m
The 2x4mm Teflon Tubing – For 3D Printers 1.75mm Filament 1m good corrosion resistance and high insulation resistance. High or low-temperature resistance. It has unique lubricity and the surface is no sticky.
Durable using in the atmosphere and protect itself from being aged. Non-inflammability and made of PTFE material.
SKU: n/a -
Basic Electronic Components
Tensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – (Pack of 5)
-55%
Basic Electronic ComponentsTensioner Torsion Spring for GT2 6MM Timing Belt used in 3D Printer – (Pack of 5)
Product Description
The Tensioner Torsion Spring for GT2 6MM Timing Belt is a metal component that helps to maintain the optimal tension of the timing belt in 3D printers. It prevents the belt from slipping, skipping or moving erratically. It is suitable for 3D printer timing belt systems. These springs can be used to adjust the belt tension as needed.
SKU: n/a -
Basic Electronic Components
TERASIC TECHNOLOGIES P0082 Development Kit, Altera Cyclone IV FPGA , DE0-Nano, 2x GPIO Headers, 32MB SDRAM, Accelerometer
-62%
Basic Electronic ComponentsTERASIC TECHNOLOGIES P0082 Development Kit, Altera Cyclone IV FPGA , DE0-Nano, 2x GPIO Headers, 32MB SDRAM, Accelerometer
TERASIC TECHNOLOGIES P0082 (Terasic) is a DE0-Nano Development board is a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and “portable” projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 logic elements (LEs).This platform: Allows user to extend designs beyond the DE0-Nano board with two external general-purpose I/O (GPIO) headers, Allows user to handle larger data storage and frame buffering with on-board memory devices including SDRAM and EEPROM.
TERASIC TECHNOLOGIES P0082 (Terasic) provides enhanced user peripheral with LEDs and push buttons, Is small and lightweight, Is reconfigurable without requiring superfluous hardware, Is suitable for mobile designs where portable power is crucial, as it provides three power scheme options including a USB Mini-AB port, 2 pin external power header and two DC 5-V pins.
SKU: n/a -
-
-
-
-
Basic Electronic Components
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
This is a 100k NTC Thermistor with a 1 Meter Cable, designed for use as a temperature sensor in 3D printers like Reprap. Thermistors are thermally sensitive resistors that exhibit significant changes in resistance with small variations in temperature.
It’s important to note that a thermistor’s resistance change is non-linear and follows a specific curve provided by the manufacturer.
With a positive thermal coefficient (PTC), the resistance increases as the temperature rises, while a negative thermal coefficient (NTC) results in a decrease in resistance. Because the relationship is not linear, having an accurate measurement table is often more useful than relying solely on a linear formula. These detailed measurements can typically be found in the thermistor’s datasheet.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Thread Size: PT, R, BSPT 1/2 PT, R, BSPT 1/2: Air, Vaccum, Water(no freezing) Body Material: PBT Plastic Thread Material: Nickel Plated Brass Seal, O-ring: NBR Working Pressure: : 0∼60°C | 32∼140°F
-30%
Motors | Drivers | Pumps | ActuatorsThread Size: PT, R, BSPT 1/2 PT, R, BSPT 1/2: Air, Vaccum, Water(no freezing) Body Material: PBT Plastic Thread Material: Nickel Plated Brass Seal, O-ring: NBR Working Pressure: : 0∼60°C | 32∼140°F
- Type of Product: Flow Control
- Model No: NSE 06-04
- Maximum Working Pressure: 10 bar
- Size: ST-NSE
- Fluid: Air, Vacuum
- Thread Size: 1/2″
- Size O.D: 6 mm
SKU: n/a -
Basic Electronic Components
Three Colour RGB SMD LED Module 5050 Full Color Pwm For Arduino MCU
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting resistors to prevent burnout.
Compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266.
FEATURES:
- RGB trichromatic limiting resistor to prevent burnout
- LED drive mode: Common cathode driver
- can be accessed by various microcontroller
- Through PWM adjust three colors can be blended to get a different color
Package included:
1 x Three Colour RGB SMD LED Module
SKU: n/a -
-
Basic Electronic Components
TIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
-39%
Basic Electronic ComponentsTIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
TIP32C PNP Bipolar Power Transistor 100V 3A TO-220 Package (Pack of 5)
Meet the TIP32C PNP Bipolar Power Transistor, a reliable choice for power amplification and control in electronic circuits. Designed for optimal efficiency and performance, this transistor is suitable for a variety of applications, including low-distortion complementary designs and general-purpose amplification.
Features:
- Low Saturation Voltage: Ensures minimal power loss and efficient operation, ideal for high-performance applications.
- Simple Drive Requirements: With straightforward drive requirements, this transistor is easy to integrate into your circuit designs, saving you time and effort.
- High Safe Operating Area: Designed to withstand demanding operating conditions, ensuring reliability and longevity in your electronic systems.
- Complementary Designs: Suitable for use in low distortion complementary designs, allowing for versatile circuit configurations and applications.
- Easy Handling: Compact and lightweight, making it convenient to carry and handle during installation and assembly.
SKU: n/a -
-
-
-
Motors | Drivers | Pumps | Actuators
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
-24%
Motors | Drivers | Pumps | ActuatorsTL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors,
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer
- I3 and UM models can also be used, and different machines will have different clipping effects.
SKU: n/a -
Development Boards
TL866II Plus Universal Programmer Kit with 6 IC Adapters
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection
- Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
- English Language Support
- It can program faster than another programmer 500%~1000%
SKU: n/a
