Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5593–5616 of 6089 results
-
Motors | Drivers | Pumps | Actuators
TMC2100 Stepper Motor Driver, Module
- This driver has 200 steps per revolution in full step (1.8 degrees per step).
- Allowable continuous current per phase: 1.25A (RMS) or 1.77A (max)
- The maximum current in the short term for each phase: 2.5A
- Motor voltage: 5.5 to 46 V
- StealthChop mode to reduce noise
- SpreadCycle mode to increase torque
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TMC2208 Stepper Motor Driver Module
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
Basic Electronic Components
TMC2208 Stepper Motor Driver Module
TMC2208 Stepper Motor Driver Module
The TMC2208 V1.2 is the latest version that uses the UART function directly and eliminates the need for extra wiring.
It has a flexible micro-Plyer interpolation unit that can provide up to 256 micro steps per step resolution. This allows for smooth sinusoidal control even in systems with limited pulse rates. As a stealth chip, it uses fine music technology that is widely used in 3D printing. Therefore, it is compatible with existing 3D printer electronics and does not require costly redesign. It has pulse/direction input and can operate independently. The configuration is done through a digital input.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor Driver Module with Heatsink
- Operating Voltage: 4.5V to 28V DC
- Input Signal Logic Voltage: 3.3V to 5V DC
- Maximum Peak Current: 2A per phase (use with Heatsink and Fan only)
- Maximum Continuous Current: 2A
- Compatibility: 3V3 and 5V microcontrollers
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor DriverF
- Maximum current: 2A per phase (continuous, with cooling), 2.8A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
-
Basic Electronic Components
TNY280PN Power Integrations AC/DC Converter IC DIP-8 Package
The TNY280PN is a high-efficiency AC/DC Converter IC from Power Integrations, designed for compact and energy-efficient power supply solutions. It features Tiny Switch-III technology, integrating a high-voltage power MOSFET, oscillator, and control logic into a DIP-8 package, reducing component count and simplifying circuit design.
Features:
- Integrated High-Voltage Power MOSFET: Reduces external components and simplifies circuit design.
- Wide Input Voltage Range: Supports 85V to 265V AC, making it ideal for universal power applications.
- TinySwitch-III Technology: Enhances energy efficiency, reduces switching losses, and improves thermal performance.
- High Efficiency: Lowers power dissipation, minimizing heat generation.
- Ultra-Low Standby Power Consumption: Meets modern energy-saving standards with minimal power draw in standby mode.
SKU: n/a -
-
Batteries | Chargers and Accessories
Tomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
-24%
Batteries | Chargers and AccessoriesTomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
As for rechargeable batteries, a battery charger is a must-have. Here is our TOMO V6-2 Dual USB 2 Slots Battery Charger! Extremely environmentally friendly and energy-saving, our battery charger is great for daily use.
Features:
- USB to Connect to the Power supply.
- Super portable, great for home or travel use.
- Indicators for Charging (Red) and Battery Full (Green).
- With two slots for two batteries charging separately.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Basic Electronic Components
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)
-57%
Basic Electronic ComponentsTower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)
Tower Pro MG996R Digital Metal Gear High Torque Servo Motor
The Tower Pro MG996R Digital Metal Gear High Torque Servo Motor offers impressive performance with its metal gears and high 10kg stalling torque in a compact design. This updated version of the popular MG995 servo features enhanced shock resistance, a redesigned PCB, and a new IC control system, improving precision and reliability. The motor and gears have also been optimized to reduce dead band width and improve centering accuracy.
This servo comes equipped with a 30cm wire and a 3-pin ‘S’ type female header connector, making it compatible with a wide range of receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum, and Hitec. It provides an excellent solution for projects requiring precise and high-torque motion control.
Wire Configuration of Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation): –
- RED – Positive
- Brown – Negative
- Orange – Signal (PWM)
SKU: n/a -
Basic Electronic Components
Towerpro MG90S Micro Digital Servo Motor (360° Continuous Rotation)
Towerpro MG90S Micro Digital Servo Motor (360° Continuous Rotation)
Presenting the Towerpro MG90S Micro Digital Servo Motor featuring 360° Continuous Rotation, an affordable and high-quality servo motor for diverse applications. Ideal for RC aircraft, automobiles, robotics, or any inventive project, these servo motors deliver dependable performance without breaking the bank.
Though not original TowerPro products, these motors have undergone extensive testing and are proven to be of commendable quality for their cost. They offer high resolution, precise positioning, swift control response, and consistent torque across the servo’s range of motion, guaranteeing superior performance for various uses.
Specifications include: Model: MG90S, Weight: 13g, Operating Voltage: 4.8V~6.6V, Servo Plug: JR, Stall Torque at 4.8V: 1.8kg-cm, Stall Torque at 6.6V: 2.2kg-cm.
Lightweight at only 13g and compatible with JR servo plugs, these motors are a breeze to incorporate into your projects. The Towerpro MG90S servo motors are an excellent choice for both hobbyists and professionals, offering robust performance and impressive holding power, a stellar addition to any toolkit.
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TowerPro MG945 Digital High Speed Servo Motor – Standard Quality
-25%
Motors | Drivers | Pumps | ActuatorsTowerPro MG945 Digital High Speed Servo Motor – Standard Quality
- Stall torque: 10kg/cm (4.8v); 12kg/cm (6v)
- Operating voltage: 4.8 ~ 6.6v
- Temperature range: 0- 55deg
- Gear Type: Metal gear
- Dead band width: 1us
- servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TowerPro MG958 Digital High Torque Metal Gear Servo Motor
- Operating Voltage: 4.8v-6.6v
- Stall Torque (4.8v): 18.0kg.cm
- Stall Torque (6.6v): 20.0kg.cm
- Servo arms & screws included and fit with Futaba servo arm
- CE & RoHS approved
- Servo case: Alloy case in the middle
- Gear Type: Metal gear
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TowerPro MG959 Full CNC Alloy Case High Torque Servo Motor
- Operating voltage: 4.8v~6.0v
- Operating temperature range: -0~+55℃
- Operating speed (4.8v): 0.16sec / 60 degree at no load
- Operating speed (6.0v): 0.13sec / 60 degree at no load
- Stall torque @ 4.8V: 28.0kg.cm
- Stall torque @ 6.0V: 32.0kg.cm
- Gear type: metal gears
SKU: n/a
