Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5641–5664 of 6089 results
-
Electronic Components
Transparent 830 Points Solderless Breadboard
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
SKU: n/a -
Development Boards
Transparent Blue ABS Plastic Case for UNO R3
- Made of high-quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
Batteries | Chargers and Accessories
Transparent Waterproof 2 x 18650 Battery Portable Clear Plastic Storage Box Size:78 x 42 x 21mm(Pack of 2)
-12%
Batteries | Chargers and AccessoriesTransparent Waterproof 2 x 18650 Battery Portable Clear Plastic Storage Box Size:78 x 42 x 21mm(Pack of 2)
- Made of PVC material, transparent and practical
- Specially designed in the inner side, prevent the batteries from rolling
- Easy for carrying around
- Environmental protection when the battery runs out
- Suitable for 18650
SKU: n/a -
Development Boards
Transparent White UNO R3 Injection Molding Case with Bubble
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damage, dust, and scratches Clear the Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: n/a -
-
-
Drone Transmitter and Receiver
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
-20%
Drone Transmitter and ReceiverTS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
- Transmitter 600mW/48CH >5km(open area).
-
Frequency control: built-in frequency and phase lock loop.
- Transmitter module connector: Female RP-SMA.
-
Antenna connector: Male RP-SMA.
-
Supply Voltage: 7-24 V
-
Current: 220 mA.
-
48 CH is compatible with all FPV 5.8g receivers.
SKU: n/a -
Drone Transmitter and Receiver, FPV Antennas and Trans-Receivers
TS835 FPV 5.8G 600MW 48CH (2-6S) Wireless AV Transmitter
-50%
Drone Transmitter and Receiver, FPV Antennas and Trans-ReceiversTS835 FPV 5.8G 600MW 48CH (2-6S) Wireless AV Transmitter
- No. of Channels: 48CH
- Antenna Gain: 2db
- Frequency: 5.8G
- Video Format: NTSC / PAL Auto
- 48Â CH compatible with all FPV 5.8g receivers.
- 5.8G 600mW 40 Channels AV wireless FPV transmitter
- Super small 200mA current for 600mW wireless transmitter power.
- 600mW transmitter power assure 5KM distance in open area,
SKU: n/a -
Sensors
TTGO T-Higrow BME280 Wifi Bluetooth-Unsoldered (Without Humidity Photometric Electrolyte Sensor)
-13%
SensorsTTGO T-Higrow BME280 Wifi Bluetooth-Unsoldered (Without Humidity Photometric Electrolyte Sensor)
- Working current:150 mA
- Sleep current:Â 220 uA
- Working temperature range:-40℃ ~ +85℃
- Power Supply Input:USB 5V/1A
- Charging current:500mA
- Battery Input:3.7-4.2V
- Battery:3.7V lithium battery
SKU: n/a -
-
Basic Electronic Components
TTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
-63%
Basic Electronic ComponentsTTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other.
A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.
A USB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices.
This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the board’s power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.
SKU: n/a -
Sensors
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
-28%
SensorsTube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
- Output Type: NPN-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
SKU: n/a -
Basic Electronic Components
TUL PYNQ-Z2 1M1-M000127DEV FPGA Board
The TUL PYNQ-Z2 1M1-M000127DEV FPGA Board is a development platform designed primarily for embedded systems and digital design applications, particularly in educational and research settings. It is based on the Xilinx Zynq-7000 SoC (System on Chip), which combines a dual-core ARM Cortex-A9 processor with programmable logic, enabling seamless hardware-software integration. The board supports Python productivity through the PYNQ framework, allowing users to program the FPGA using Python instead of traditional hardware description languages.
Equipped with features like HDMI input/output, audio codec, Arduino and Raspberry Pi-compatible headers, and a variety of PMOD connectors, the PYNQ-Z2 is ideal for multimedia projects, computer vision, and IoT prototyping. Its affordability and open-source ecosystem make it a popular choice for students, hobbyists, and professionals alike.
SKU: n/a -
Sensors
Turbidity Sensor Suspended Turbidity Value Detection Module Kit
- Working voltage: 5.00V DC
- Working current: 40mA (MAX)
- Response time: <500ms
- Insulation resistance: 100MΩ (Min)
- Analogue output: 0~4.5V;
- Digital output: high/low-level signal (the corresponding threshold can be selected by adjusting the potentiometer)
- Operating temperature: -20℃~90℃
- Module size: 38.6mm*22.1mm
SKU: n/a
