Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5641–5664 of 6075 results
-
-
Basic Electronic Components
TTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
-63%
Basic Electronic ComponentsTTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other.
A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.
A USB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller. The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices.
This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RL FTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the board’s power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.
SKU: n/a -
Sensors
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
-28%
SensorsTube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
- Output Type: NPN-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
SKU: n/a -
Basic Electronic Components
TUL PYNQ-Z2 1M1-M000127DEV FPGA Board
The TUL PYNQ-Z2 1M1-M000127DEV FPGA Board is a development platform designed primarily for embedded systems and digital design applications, particularly in educational and research settings. It is based on the Xilinx Zynq-7000 SoC (System on Chip), which combines a dual-core ARM Cortex-A9 processor with programmable logic, enabling seamless hardware-software integration. The board supports Python productivity through the PYNQ framework, allowing users to program the FPGA using Python instead of traditional hardware description languages.
Equipped with features like HDMI input/output, audio codec, Arduino and Raspberry Pi-compatible headers, and a variety of PMOD connectors, the PYNQ-Z2 is ideal for multimedia projects, computer vision, and IoT prototyping. Its affordability and open-source ecosystem make it a popular choice for students, hobbyists, and professionals alike.
SKU: n/a -
Sensors
Turbidity Sensor Suspended Turbidity Value Detection Module Kit
- Working voltage: 5.00V DC
- Working current: 40mA (MAX)
- Response time: <500ms
- Insulation resistance: 100MΩ (Min)
- Analogue output: 0~4.5V;
- Digital output: high/low-level signal (the corresponding threshold can be selected by adjusting the potentiometer)
- Operating temperature: -20℃~90℃
- Module size: 38.6mm*22.1mm
SKU: n/a -
Development Boards
TW Link V2 Programmer For STM8 and STM32
- Voltage: 5V
- The wiring is very simple because the interface definition is marked directly on the aluminum housing protects
- Internal board of this programmer is with 500MA self-recovery fuse
- It’s convenient and practical, fast speed and stable
- The interface easy to use simple horns seat pitch of 2.54
- Weight: 10g
SKU: n/a -
Basic Electronic Components
TXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
-53%
Basic Electronic ComponentsTXB0104D Voltage Level Translator Bidirectional, 0.02 mA ns 100 Mbps
This TXB0104D 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5- V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA must not exceed VCCB. When the OE input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE must be tied to GND through a pulldown resistor The current sourcing capability of the driver determines the minimum value of the resistor. The TXB0104D device is designed so the OE input circuit is supplied by VCCA. This device is fully specified for partial power- down applications using I OFF. The I OFF circuitry disables the outputs, which prevents damaging current back-flow through the device when the device
is powered down.SKU: n/a -
-
-
