Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5713–5736 of 6089 results
-
Basic Electronic Components
USB Fast Charging Module
USB Fast Charging Module
This buck module is designed to charge phones through a USB port. It is compatible with Quick Charge 3.0 and can handle input voltages from 12V to 24VDC. The module utilizes the IC IP6505, a step-down converter that includes an integrated synchronous switch.
Application:
- Car Charger
- Fast Charger Adaptor
- Intelligent Power Strip
Features:
- Supports multiple fast charging protocols.
- Input over-voltage, over current, under-voltage protection.
- Output overcurrent, short circuit protection
- Module over-temperature protection.
- Long lifespan.
SKU: n/a -
Development Boards
USB ICSP PIC Programmer – UIC00B
- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: n/a -
Basic Electronic Components
USB LED Book Lights
Buy the new USB LED Book Light. It is Lightweight, compact and makes it easy to carry and handle. It is best Suitable for notebook computers, desktops, computers, mobile power supplies, etc. It’s small in size and is very easy to install.
Features:
- Lightweight and compact making it easy to carry and handle.
- Â Light Source: LED Bulbs, Portable and easy to carry
- Suitable for notebook computers, desktops, computers, mobile power supplies, etc.
- Mini size, taking little room, easy to install, convenient to use.
- Portable and easy to carry.
- Adopting high technology, show excellent performance.
- Current: 500mah LED quantity
SKU: n/a -
(ESC) Drone Speed Controller
USB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
-17%
(ESC) Drone Speed ControllerUSB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
- BL-S/BL-32 can use BLHeli-16 and BLHeli-32 software. (Connect the ESC signal line end to the computer USB interface and connect with the assistant software.)
- BLHeli-16 software Supports ESC of SIL and ATMEL chips ;BLHeli-32 software Supports ESC of STM chips.
- Convenient to set up various functions of open source ESC on the computer.
- The ESC can be set to one-way or two-way, and the motor starts current size. One-way ESC commutation.
- BLHeli open source ESC special.
SKU: n/a -
Batteries | Chargers and Accessories
USB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
-26%
Batteries | Chargers and AccessoriesUSB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Color: BLACK
- Input / Output Current: Maximum Input 0.6
- Easier for installation save time and money
- Easy to use.
SKU: n/a -
Batteries | Chargers and Accessories
USB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
-18%
Batteries | Chargers and AccessoriesUSB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
SKU: n/a -
Batteries | Chargers and Accessories
USB to Micro USB Cable wire 1M for NodeMCU
- Cable length: 1 Meter
- Colour: White, Orange, Black, Blue
- Weight: 17g
- Best replacement for the original one or acts as a spare
- The cable is made of durable and high-quality material
- Enable you to easily transfer all your files from or to cellphone
SKU: n/a -
-
-
-
Batteries | Chargers and Accessories
USB3.0 to SATA 2.5, Inch External Hard Disk, Data Cable, With USB Power Supply
-11%
Batteries | Chargers and AccessoriesUSB3.0 to SATA 2.5, Inch External Hard Disk, Data Cable, With USB Power Supply
- Cable length: 25 cm (with Connector)
- Colour: Black
- Type:Â USB-A to SATA
- Weight: 37 gm
- Only support 2.5 inch SATA D/SSD, not support 3.5-inch hard disk.
- Small and compact, easy to carry and use.
- Equipped with a power supply port, convenient to use
SKU: n/a -
Basic Electronic Components
V5 V6 Nozzle 1.75+0.6 for 3D printer
The nozzle is the component of a 3D printer that deposits the molten filament into the build area. There are many different types of 3D printer nozzles available and leveraging their different strengths is important. Standard brass nozzles are great for general-purpose 3D printing but abrasive filament like NylonX requires a high-performance nozzle. Copper-plated and Clean Tip specialty nozzles are built to stay clean and not let filament stick to them.
0.6 mm 3D Printer Extruder Brass Nozzle which has outstanding quality and the best performance for DIY and professional systems. By simply adding a holder, you can assemble your own dual-head extrusion.
Features:Â
- Light Weight
- high-quality Brass
- Small in size
- Easy to install.
- Easy to use.
SKU: n/a -
Basic Electronic Components
V5 V6 Nozzle 1.75+0.8 for 3D Printer
PRODUCT DESCRIPTION
V5 V6 Nozzle 1.75 0.8 for 3D Printer
A 3D printer nozzle is the part that lays down the melted filament on the build area. You can choose from various kinds of 3D printer nozzles, depending on your needs. Brass nozzles are good for general 3D printing, but you need a high-performance nozzle for abrasive filaments like NylonX. Copper-plated and CleanTip nozzles are designed to prevent filament from sticking to them.
0.6 mm 3D Printer Extruder Brass Nozzle is a high-quality and reliable nozzle for DIY and professional systems. You can make your own dual-head extrusion by adding a holder.
Features:Â
- Light Weight
- high-quality Brass
- Small in size
- Easy to install.
- Easy to use.
SKU: n/a -
Basic Electronic Components
V6 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament
V6 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This heat break is compatible with E3D v6 1.75mm hot ends.
This tube is made of stainless steel and coated with TwinClad XT, a low-friction Electroless Nickel composite coating. TwinClad XT is often used in injection molding for its release properties. This coating reduces clogging in the hotend zone where the filament melts. It is also hard and resistant to corrosion. It works well with abrasive filaments like Carbon Fiber, Metal-filled, Aluminates, etc.
This part replaces the PTFE liner and provides reliable and long-lasting performance with PLA.
SKU: n/a -
Basic Electronic Components
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
V6 Brass Volcano Nozzles are high-performance nozzles made of brass for your Volcano Hot End. They allow you to print with a wide range of layer heights, from super-fine to super-fat, and achieve stronger, faster and bigger prints with the Volcano Hot End Powerup! These nozzles work seamlessly with the LulzBot Moars ruder, and can also upgrade many RepRap 3D printers, such as the Prusa i3, with a Volcano.
Volcano nozzles enable super-fast printing with the Volcano block and packs, as they have extra-long melt zones that heat up the filament at very high speeds.
Note: It only matches to V6 type Extruder
Specifications and Features:
- Input: 1.75mm
- output: 0.60mm
- Weight: 3g
- Material: Brass Alloy
- Compatible with V6
SKU: n/a -
Basic Electronic Components
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
V6 Volcano Brass Length Extruder Nozzle – 1.75mm x 0.60mm
V6 Brass Volcano Nozzles are high-performance nozzles made of brass for your Volcano Hot End. They allow you to print with a wide range of layer heights, from super-fine to super-fat, and achieve stronger, faster and bigger prints with the Volcano Hot End Powerup! These nozzles work seamlessly with the LulzBot Moars ruder, and can also upgrade many RepRap 3D printers, such as the Prusa i3, with a Volcano.
Volcano nozzles enable super-fast printing with the Volcano block and packs, as they have extra-long melt zones that heat up the filament at very high speeds.
Note: It only matches to V6 type Extruder
Specifications and Features:
- Input: 1.75mm
- output: 0.60mm
- Weight: 3g
- Material: Brass Alloy
- Compatible with V6
SKU: n/a -
Basic Electronic Components
V6 Volcano Brass Lengthen Extruder Nozzle – 1.75mm x 0.40mm
Product Description
V6 Brass Volcano Nozzles are high-performance nozzles that enhance your Volcano HotEnd. With these nozzles, you can print faster, stronger and bigger with a wide range of layer heights. The Volcano HotEnd PowerUp is compatible with the Lulzbot Moarstruder and many other RepRap 3D printers, such as the Prusa i3, that can be upgraded with a Volcano.
Volcano nozzles have extra long melt zones that allow for high flow rates and rapid printing. V6 Brass Volcano Nozzle is designed for V6 type extruders only.
Specifications and Features:
- Input: 1.75mm
- output: 0.40mm
- Weight: 3g
- Material: Brass Alloy
- Compatible with V6
SKU: n/a -
Basic Electronic Components
V623ZZ 623VV V Groove Guide Pulley Rail Ball Bearings Metal-(Pack of 5)
-48%
Basic Electronic ComponentsV623ZZ 623VV V Groove Guide Pulley Rail Ball Bearings Metal-(Pack of 5)
V623ZZ 623VV V Groove Guide Pulley Rail Ball Bearings Metal
This is a pack of four metal pulleys with V-groove guide and ball bearings. The model number is V623ZZ and the size is 3mmx12mmx4mm.
V623ZZ is a popular and economical choice of bearing that can be used for various purposes. It is suitable for many machines and equipment that require smooth and reliable motion. V623ZZ has a wide range of applications and is easy to install and maintain.
SKU: n/a
