Recommended Products
Raspberry Pi
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: n/a
Shop
Showing 5761–5784 of 6075 results
-
-
-
-
-
-
Motors | Drivers | Pumps | Actuators
Waveshare Dedicated 3007 Cooling Fan Heatsink for Raspberry Pi Compute Module 4
-36%
Motors | Drivers | Pumps | ActuatorsWaveshare Dedicated 3007 Cooling Fan Heatsink for Raspberry Pi Compute Module 4
- General: Low-profile, PWM speed adjustment
- Interface: 4-wire PWM speed-adjustable fan header
- Rated speed: 8000±10%RPM
- Rated Power: 1.62W (12V, 0.135±0.02A)
- Cable Length: 125±10mm
SKU: n/a -
Sensors
Waveshare DHT22 Temperature-Humidity Sensor
- Temperature
- Resolution : 0.1°C
- Accuracy: ±0.5℃
- Measuring range: -40°C ~ 80°C
- Humidity
- Resolution : 0.1%RH
- Accuracy: ±2%RH (25°C)
- Measuring range : 0%RH ~ 99.9%RH
- Operating voltage : 3.3V ~ 5.5 V
- Recommended storage condition
- Temperature: 10°C ~40°C
- Humidity: 60%RH or below
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
SKU: n/a - Temperature
-
-
Sensors
Waveshare Digital SGP40 VOC (Volatile Organic Compounds) Gas Sensor, I2C Bus
- Sensor:SGP40
- Communication Bus: I2C
- Response Time:< 10s
- Measurement Range:0~1000 ppm of ethanol equivalents
- Operating Voltage:3.3V/5V
- Digital I2C output, less interference
- Onboard voltage translator, compatible with 3.3V/5V operating voltage
SKU: n/a -
Sensors
Waveshare Environment Sensor HAT for Raspberry Pi, I2C Bus
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Waveshare General Driver board for Robots, Based on ESP32
- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
SKU: n/a -
-
Batteries | Chargers and Accessories
Waveshare Industrial Grade Multifunctional USB HUB, Extending 3x USB ports + 100M Ethernet Port (Without Power Adapter)
-25%
Batteries | Chargers and AccessoriesWaveshare Industrial Grade Multifunctional USB HUB, Extending 3x USB ports + 100M Ethernet Port (Without Power Adapter)
- Brand: Waveshare
- Product: USB HUB
- Plug and Play Operation
- Networking: 10/100 adaptive
- Input Operating voltage: 5V
- Input connector: USB-B
SKU: n/a -
Basic Electronic Components
Waveshare Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts (Without Power Adapter)
-62%
Basic Electronic ComponentsWaveshare Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts (Without Power Adapter)
Industrial Grade USB HUB, Extending 4x USB 2.0 Ports Switchable Dual HostsNote: For More Info Please Watch Video in the video section
Switch the active host by the handy switch at any time, easily control two hosts (say, the computer and Raspberry pi) by the same keyboard and mouse,
no more two sets of keyboards and mice on the table, keeping your working environment neat and tidy.Features:
- 4x extended USB ports, switchable two inputs, sharing USB devices for two hosts
- Industrial grade HUB chip, adopting MTT technology, allows stable and smooth 4x concurrent USB connections
- ESD protection for each USB port, preventing electric surge damage and data loss
- Over-voltage protection, effectively preventing other high voltage power input from damaging the connected devices
- Multiple protection circuits: over-voltage, over-current, short circuit, over-temperature, reverse current, under-voltage lock-out, 8KV ESD protection, filtering protection, etc.
- Industrial grade metal case, rugged & durable, with mounting holes for easy installation
SKU: n/a
