Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 73–96 of 6074 results
-
-
-
Batteries | Chargers and Accessories
1 Meter UL1007 18AWG PVC Electronic Wire (Red)
The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: n/a -
-
Basic Electronic Components, Capacitor, Electronic Components
1 nF 50V 0402 SMD Multi-Layer Ceramic Capacitor – 0402B102K500CT Walsin (pack of 20)
-29%
Basic Electronic Components, Capacitor, Electronic Components1 nF 50V 0402 SMD Multi-Layer Ceramic Capacitor – 0402B102K500CT Walsin (pack of 20)
This Surface Mount (SMD) Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. It is very low cost, and used mostly for reducing the noise or filtering on data lines, power lines etc.
Applications:
- Consumer electronics, for example
Tuners, Television receivers, All types of cameras - Telecommunications
- Data processing
SKU: n/a - Consumer electronics, for example
-
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
1 Ohm 1/4W 0603 Surface Mount Chip Resistor (Pack of 100)
-25%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor1 Ohm 1/4W 0603 Surface Mount Chip Resistor (Pack of 100)
Ohm 1/4W 0603 Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate.
Note: Images for reference only. The actual product may vary in terms of the markings on the resistor. Dimensions may vary by ±10% due to manual measurements.
Package Includes:
100 x 1 Ohm 1/4W 0603 Surface Mount Chip Resistor.
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
1 Ohm 1/4W 1206 Surface Mount Chip Resistor (Pack of 100)
-25%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor1 Ohm 1/4W 1206 Surface Mount Chip Resistor (Pack of 100)
1 Ohm 1/4W 1206 Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate.
Note: Images for reference only. The actual product may vary in terms of the markings on the resistor. The dimensions may vary ±10% due to manual measurements.
Package Includes:
100 x 1 Ohm 1/4W 1206
1 Ohm 1/4W 1206 Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate.
Note: Images for reference only. The actual product may vary in terms of the markings on the resistor. The dimensions may vary ±10% due to manual measurements.
Package Includes:
100 x 1 Ohm 1/4W 1206 Surface Mount Chip Resistor.
1 Ohm 1/4W 1206 Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate.
Note: Images for reference only. The actual product may vary in terms of the markings on the resistor. The dimensions may vary ±10% due to manual measurements.
Package Includes:
100 x 1 Ohm 1/4W 1206 Surface Mount Chip Resistor.
.
SKU: n/a -
Basic Electronic Components
1 ohm Resistor
1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications.
We made it available in the form of a bunch of different values as required for the project to provide convenience, so you need not find a differently required value resistor at different places while working on your project.
SKU: n/a -
Propellers
1 Pair 5 inch Long 5045 CW/CCW 3 Blade Propeller Prop for RC Multi Quadcopter Helicopter UAV QAV250 DIY
-21%
Propellers1 Pair 5 inch Long 5045 CW/CCW 3 Blade Propeller Prop for RC Multi Quadcopter Helicopter UAV QAV250 DIY
- Diameter: 5 ” Inch; Slope: 4.5 ” Inch
- Length: 5 inch (12.7 cm); No. of Vanes – 3 Blades
- Weight : 6 grams (single propeller weight)
- Center Hub size : 5.0mm
- Package Includes: 1 x 5 inch 3 Blade Propellor Set
SKU: n/a -
Motors | Drivers | Pumps | Actuators
1 Pair 55 mm Blades Propeller for Coreless Motor Mini Drones Aircraft Robotic Helicopter Toy
-35%
Motors | Drivers | Pumps | Actuators1 Pair 55 mm Blades Propeller for Coreless Motor Mini Drones Aircraft Robotic Helicopter Toy
- Length : 55mm
- Mounting hole : 1mm Motor Shaft
- Suitable for 7x20mm, 8x20mm, 8.5X20mm Coreless Motors
- Material : ABS
- Package Include 2 x 55mm Propeller (1x CW and 1x CCW)
SKU: n/a -
Drone Motor
1 Pair Fireproof T Plug Connector For RC ESC Battery
Features:
This is a pair of industry standard electrical connectors for your RC vehicles. These solder on connectors are ideal for use with batteries which do not come with connectors, or the other electrical system components of RC vehicles.
The product have a very low internal resistance as compared to their competitors.Specifications:
Deans ultra Plug Deans T plug for RC vehicles.
Female + Male
Rate:60-75A
Male Plug – Dimension: 13mm x 7.5mm x 19mm
Female Plug – Dimension: 13mm x 7.5mm x 15mmPackage Included:
1 x Pair T PlugSKU: n/a -
Propellers
1 Pair Quadcopter 1045 Carbon Fiber CW and CCW Propeller for DJI F450 10×4.5 Black for Robotics Science Project Drone, Hobby Kit
-50%
Propellers1 Pair Quadcopter 1045 Carbon Fiber CW and CCW Propeller for DJI F450 10×4.5 Black for Robotics Science Project Drone, Hobby Kit
- Net Weight: 120g; Package Content: 1 pairs x 1045 Propeller
- High Quality CW & CCW propeller for hex rotor motor
- Model: 1045
- Diameter of the prop: 10″
- Pitch of the prop: 4.5″
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
1 pF 50V 0402 SMD Multilayer Ceramic Capacitors – 0402CG1R0C500NT Fenghua (pack of 20)
-29%Basic Electronic Components, Capacitor, Electronic Components1 pF 50V 0402 SMD Multilayer Ceramic Capacitors – 0402CG1R0C500NT Fenghua (pack of 20)
This Surface Mount (SMD) Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. It is very low cost, and used mostly for reducing the noise or filtering on data lines, power lines etc.
Applications:
- Consumer electronics, for example
Tuners, Television receivers, All types of cameras - Telecommunications
- Data processing
SKU: n/a - Consumer electronics, for example
-
Batteries | Chargers and Accessories
1 x 18650 Battery Holder with, 18.4MM Bore Diameter – pack of 4
-37%
Batteries | Chargers and Accessories1 x 18650 Battery Holder with, 18.4MM Bore Diameter – pack of 4
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: n/a -
-
Batteries | Chargers and Accessories
1-8S Lipo Battery Voltage Tester
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: n/a -
Basic Electronic Components
1.4 MKS Gen L V1.0- Mega2560 R3 RAMPS 3D Printer Controller Board
The MKS-GEN L V1.0, developed by Makerbase, is an advanced solution designed to overcome the limitations of open-source controller boards like the Ramps 1.4, specifically for 3D printing applications. This board enhances flexibility and performance, addressing key shortcomings of its predecessors to provide a more reliable and versatile control solution.
The MKS BASE-L, on the other hand, is a comprehensive electronics board ideal for Reprap and other CNC devices. Featuring an onboard ATmega2560 microcontroller and A4982 stepper drivers, it provides five motor outputs for precise control. Fully compatible with firmware used by Ramps1.4, the MKS BASE-L offers adaptability to various power sources, supporting voltages from 12V to 24V.
Engineered for versatility, the MKS BASE-L is particularly suited for manufacturers involved in the mass production of 3D printers, where it can serve as the primary control board. Unlike the Ramps1.4, it includes an additional E1 heating output, further expanding its functionality and making it a reliable choice for a wide range of applications.
SKU: n/a
