Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 1033–1056 of 6090 results
-
-
-
Batteries | Chargers and Accessories
7S 25.9V 18650 Lithium Battery Equalizer Board 29.4V Polymer Battery Equalizer Board Connector
-20%
Batteries | Chargers and Accessories7S 25.9V 18650 Lithium Battery Equalizer Board 29.4V Polymer Battery Equalizer Board Connector
- Over-discharge protection.
- Â 18650 Lithium Battery Equalizer Board.
- Type:Â Voltage Regulator.
- Supply Voltage: 29.4v
- Dissipation Power:18650 Lithium Battery Balanced Function Board.
- No. resistors: 7
- Values of resistor: 620R
SKU: n/a -
Basic Electronic Components
7x9cm Prototyping PCB printed circuit experimental board
This is a Universal PCB Prototype Board single-Side 7 X 9 CM High-quality universal prototyping board with standard 0.1″ spacing through holes.
Specification:
Material: Bakelite
Dimension: 7 x 9cm
Thickness: 1.5mm
Hole pitch: 2.54mm
Hole inner diameter: 1.0mmPackage included:
1 XÂ 7x9cm Prototyping PCB printed circuit experimental boardSKU: n/a -
Motors | Drivers | Pumps | Actuators
8 Channel Servo Controller SC08A
-
Resolution: 8000 steps = 0.25us.
-
UART: 9600 baud rate.
-
Servo pulse range: 0.5ms to 2.5ms.
-
Dimension :Â 48 x 46 x 14 (LxWxH) mm.
- 8 channels: Servo-driven independently.
-
Extendable to 16 Channels: Two controllers linked together to drive 16 servos.
-
Optional Position Reporting: User may request the position of an individual servo.
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
8 pieces of 3.7V Mini Drone DC Motor 25000 RPM and with 55mm Propeller (4 CW and 4 CCW)
-19%
Motors | Drivers | Pumps | Actuators8 pieces of 3.7V Mini Drone DC Motor 25000 RPM and with 55mm Propeller (4 CW and 4 CCW)
- Package Include 8 x Motors and 4 Propeller (4CW and 4CCW)
- Motor Dimension: 15mm X 12mm X 10mm, Shaft Size: 0.8 x 3mm.
- Propeller length: 55mm
- Voltage: DC 3.7V; Current: 0.8A; RPM: 25000
SKU: n/a -
Electronic Components
8 Way Slide Switch 2.54mm Pitch (Pack of 3)
It is a 2.54mm Pitch 8 Way DIP Slide Switch. The slide switch is widely used in the modulation of the CPU, wireless communication, broadcast, and TV, in the software programming for the automated equipment, and in the self-control of the NC equipment and other instruments and meters.
Package Includes:
5 x 2.54mm Pitch 8 Way DIP Slide Switch.
SKU: n/a -
-
Basic Electronic Components
8 x 8mm 1m Cable Drag Chain Wire Carrier
This product is a Cable Drag Chain Wire Carrier that measures 8 x 8mm and 1m in length. Cable drag chains are essential for modern machines as they act like their umbilical cords. They are a convenient and effective way to organize the wires of your CNC machines. They also prevent downtime, protect, support and prolong the lifespan of cables and hoses.
Our Cable Drag Chains are specially designed and manufactured for 3D Printers. They ensure the safety and guidance of cables and hoses for all kinds of movable equipment that require power.
SKU: n/a -
Sensors
801S Vibration Shock Sensor Module
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: n/a -
Propellers
8045 Carbon Nylon Propeller for RC Drone FPV Racing Multi Rotor
Description:Brand: GemfanItem Name: Carbon Nylon 8045 PropellerMaterial: carbon nylonSize: 8 x 4.5”Color: blackWeight: 14g per pairDiameter of centre bore: 5.0mmThickness of center: 9.7mm
Hole size: 5mm with 3mm, 3.17mm and 4mm adapters. Can be reamed to 6mm or 1/4″ if needed.Recommended wheelbase: 550mm – 700mmRecommended motor: 800KV – 1100KVPackage Included:1 x CW Propeller1 x CCW PropellerSKU: n/a -
Propellers
8520 3.7V Coreless Brushed Motors Set 8.5X20Mm + 71/65/55Mm Propeller Cw Ccw Propellers|Drone Propellers|Propellers For Dc Motor|Propellers For Drone Small
-31%
Propellers8520 3.7V Coreless Brushed Motors Set 8.5X20Mm + 71/65/55Mm Propeller Cw Ccw Propellers|Drone Propellers|Propellers For Dc Motor|Propellers For Drone Small
- This Product Is A Four-Axis Aircraft Hollow Cup Motor, High Speed Motor
- Motor Size: Diameter 8.5Mm, Length 20Mm, Shaft Length 5Mm
- Motor Shaft Diameter 1Mm, Propeller Hole Diameter 1Mm
- Material: Metal, Plastic
- Motor Voltage: 3.7V
- Package Includes:4 Pieces Coreless Motors12 Pieces Propellers
SKU: n/a -
Motors | Drivers | Pumps | Actuators
8520 7.4V Coreless Brushed Motors Set 8.5x20mm + 71/65/55mm Propeller CW CCW
-26%
Motors | Drivers | Pumps | Actuators8520 7.4V Coreless Brushed Motors Set 8.5x20mm + 71/65/55mm Propeller CW CCW
- Kindly refer the product description before buying the product.
- Please allow a little size & color error due to manual measurement
- Purchase with confidence! Every order includes items that are carefully hand packaged and sealed in a box.
- If you are not happy with your order, contact us and we’ll make it right!
SKU: n/a
