Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 145–168 of 6075 results
-
Electronic Components
100 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
Electronic Components
100 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
Basic Electronic Components
1000 MM long Chrome Plated Smooth Rod Diameter 8 MM
These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
After rigorous inspection, the last important thing is safe packing. Anti-rust oil is to be sprayed on the rod surface and each rod is to be packed in a paper sleeve and then in the wooden box.
Features:
- High precision, high hardness, high stability.
- Strictly control every precision process to ensure quality.
- Simple design, durable material, high temperature preheat treatment, accurate outer hole size.
- Due to its moderate hardness, it has been applied in many fields.
- Made of stainless steel, high corrosion resistance, high strength and wear resistance to maintain its efficient operation
SKU: n/a -
Batteries | Chargers and Accessories, Drone Accessories
1000mah 11.1v 25C 3S Build Power Lipo Battery
-32%
Batteries | Chargers and Accessories, Drone Accessories1000mah 11.1v 25C 3S Build Power Lipo Battery
This 3 cell Build Power lipo battery with 1000mah of capacity and 25C of discharge rate comes with XT60 Connector. This lipo battery is compatible with all types of DIY drones or Multi-Rotor.
Features:
- Battery parameter: Build Power 11.1V 1000MAH 25C
- Capacity: 1000mah
- Continuous Discharge Rate: 25C
- Plug Style: XT60 Plug
- This is a lithium polymer battery and it is also rechargeable.
- There are 3s cells.
Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high-temperature condition.
- Don’t throw it into the fire.
- Don’t throw it into the water.
Package Includes:
1 x 1000mah 11.1v 25C 3S Build Power Lipo Battery.
(Note: Lipo Batteries are very sensitive hence does not cover any warranty )
SKU: n/a -
Basic Electronic Components
1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
-65%
Basic Electronic Components1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
The 1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw which is mainly used in stepper motor, machine tool rails and other types of equipment.
Features :
- 4 Start Lead Screw
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
SKU: n/a -
-
Drone Parts
1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Item Name: 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Power Consumption: 55mA@ 5v
- Format: NTSC/PAL(Free switch)
- Lens: 2.8mm IR coated FOV: 110°
- With lens cover, well protecting the lens
- With WRD function in the default
SKU: n/a -
Drone Parts
1000TVL 90 degree CMOS Camera
- Working voltage range: 4.5V-6V DC.
- Viewing Angle: 90 degrees.
- Horizontal Resolution: 1000TVL.
- Image Sensor: 1/3″ CMOS.
- Pixels: 1280 x 720.
- Minimum Illumination: 0.05LUX/F1.2.
- White Balance: Automatic.
- Gain: Automatic.
- Digital Noise Reduction: Yes (2D).
- Gamma Correction: 0.45.
- S/N Ratio: ≥50dB.
SKU: n/a -
Drone Frame and Accessories, Drone Parts
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
-31%
Drone Frame and Accessories, Drone Parts100A Multirotor ESC Power Distribution Battery Board For Quadcopter
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
100k Ohm 1/2W 0805 Surface Mount Resistor (Pack of 50)
-29%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor100k Ohm 1/2W 0805 Surface Mount Resistor (Pack of 50)
This is a high-quality Yageo 100k Ohm 1/2W 0805 Surface Mount Resistor with excellent solderability and 3 digit resistance code.
Package Includes:
1 x 100k Ohm 1/2W 0805 Surface Mount Chip Resistor (Pack of 50).
SKU: n/a -
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor
100k Ohm 1/4W 1206 Surface Mount Chip Resistor (Pack of 50)
-20%
Basic Electronic Components, Electronic Components, Resistor, SMD Resistor100k Ohm 1/4W 1206 Surface Mount Chip Resistor (Pack of 50)
100k Ohm 1/4W 1206 Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate.
Note: Images for reference only. The actual product may vary in terms of the markings on the resistor. The dimensions may vary ±10% due to manual measurements.
SKU: n/a -
Sensors
100k Ohm NTC Thermistor (Pack of 5)
- Temperature Coefficient Type: NTC
- Thermal Time Constant: 10s
- Resistance 100kΩ
- Tolerance: ±1%
- Maximum Power Rating: 75mW
- Maximum Operating Temperature: +150°C
- Minimum Operating Temperature: -80°C
- Dimensions(dia.): 2 mm
- Length: 30mm
- Application: Compensation, Control, Measurement, etc.
SKU: n/a -
Electronic Components
100kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
- Potentiometer Type: Rotary
- Maximum Resistance: 100kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
-10%
Basic Electronic Components, Capacitor, Electronic Components100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
100nF 0603 Surface Mount Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained.
Applications:
- Consumer electronics, for example
– Tuners
– Television receivers
– All types of cameras - Telecommunications
- Data processing
SKU: n/a - Consumer electronics, for example
-
Basic Electronic Components, Capacitor, Electronic Components
100nF 400V DIP Polyester Film Capacitor (Pack of 10)
-13%
Basic Electronic Components, Capacitor, Electronic Components100nF 400V DIP Polyester Film Capacitor (Pack of 10)
It is a 100nF, 400V, Through-Hole DIP Polyester Film Capacitor. The capacitor contains an insulator between relative conductors in an electrode. Non-inductive construction using metalized Polyester film with flame-retardant epoxy resin coating.
Features:
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance.
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
100nf 50v 1206 MLCC Capacitor(Reel of 4000)
-13%
Basic Electronic Components, Capacitor, Electronic Components100nf 50v 1206 MLCC Capacitor(Reel of 4000)
100nF 1206 Surface Mount Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained.
Applications:
- Consumer electronics, for example
– Tuners
– Television receivers
– All types of cameras - Telecommunications
- Data processing
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen-free compliant
SKU: n/a - Consumer electronics, for example
-
Motors | Drivers | Pumps | Actuators
100RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
-51%
Motors | Drivers | Pumps | Actuators100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a -
DIY Learning and Robot Kits
100RPM Dual Shaft BO Motor With 65mm Robot Wheel-Reinforced Rubber Wheel-Geared DC Motor-Smart Car Robot Geared Motor-Black And Yellow-Pack Of 4
-50%
DIY Learning and Robot Kits100RPM Dual Shaft BO Motor With 65mm Robot Wheel-Reinforced Rubber Wheel-Geared DC Motor-Smart Car Robot Geared Motor-Black And Yellow-Pack Of 4
- The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a low-cost geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of high-quality rubber.
- BO motor Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction Wheel Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Shaft length:7 mm Motor Design:L-Shaped Shaft Diameter:5.5 mm Size:55x48x23 mm Diameter of wheel:65 mm Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65 mm wheel is only compatible with BO motor.
- BO Motor Operating Voltage:3 to 12V Current (without loading):40-180mA RPM:100 Output Torque:0.8 kg cm Wheel Loading Capacity (kg):2.5 D hole For BO Motor (mm):6
SKU: n/a
