Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 2353–2376 of 6090 results
-
IoT and Wireless
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: n/a -
IoT and Wireless
ESP-12F ESP8266 Wifi Wireless IoT Board Module
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: n/a -
-
-
-
Basic Electronic Components
ESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
-50%
Basic Electronic ComponentsESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
Product Description
The ESP8266 Serial Wireless Wi-Fi Module Adapter Plate is designed for use with the ESP-07, ESP-08, and ESP-12E SMD ESP8266 modules. This adapter plate makes it easy to connect these Wi-Fi modules to your project. The ESP8266 module can be soldered onto the PCB, and the adapter provides clearly labeled headers for easy connection.
This adapter is perfect for quickly integrating an ESP-12 module into your breadboard setup. The pins are spaced at standard 0.1″ intervals, and the male header pins are fully compatible with the ESP-12F module, making it a versatile and convenient solution for your ESP8266-based projects.
Feature
- It has a reserved land pattern for a 3.3V regulator.
- Pinouts in black colour are on the upper layer.
SKU: n/a -
IoT and Wireless
ESP8266 NodeMCU CP2102 Board
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: n/a -
IoT and Wireless
ESP8266 Serial Port To Wi-Fi Module, FL-M1S
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-60%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
The ESP8266 chip is highly integrated, incorporating an onboard antenna and power management converter. It is optimized for energy-efficient VoIP applications, with fast switching between sleep and wake modes, adaptive radio bias, and front-end signal processing for low-power operation.
SKU: n/a -
Basic Electronic Components
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
-47%
Basic Electronic ComponentsESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
The ESP8266/ESP-12F WiFi Module (Witty Cloud Development Board + Mini NodeMCU) is an affordable, compact WiFi transceiver that offers an ideal solution for Home Automation and IoT applications. It serves as a great alternative to the NRF24L01, providing direct communication with your WiFi router via UART (Rx, Tx) from an MCU.
The ESP-12F module is one of the most feature-rich in the ESP family, offering a wide range of available pins for versatile project designs. It can be programmed to run standalone using the Arduino IDE or with LUA scripting through NodeMCU. The board comes equipped with an LDR (Light Dependent Resistor) and an onboard WS2812 RGB LED, making it ready for various projects. Additionally, it includes a CH340 micro USB module for easy programming.
SKU: n/a -
IoT and Wireless
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
-50%
IoT and WirelessESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32 16M 128Mbit Flash WiFi Bluetooth Module
- ESP32-D0WD core
- Supports multiple external QSPI flash and SRAM chips
- 32Mbits 3.3V SPI flash
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- Bluetooth v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
SKU: n/a -
Basic Electronic Components
Espressif ESP32-WROOM-32 4M 32Mbit Flash WiFi Bluetooth Module
Espressif Systems’ ESP32-WROOM-32 MCU Modules are powerful and adaptable Wi-Fi/BT/BLE modules suitable for a range of applications. They are capable of handling tasks ranging from simple sensor networks to complex voice encoding, music streaming, and MP3 decoding.
At the heart of these modules is the ESP32-D0WD chip, featuring two independently controllable CPU cores with adjustable clock frequencies from 80MHz to 240MHz. The chip also boasts a comprehensive set of peripherals, including capacitive touch sensors, Hall sensors, an SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C.
The ESP-32S Wifi Bluetooth combo module provides SDK Firmware for rapid online programming and open-source GCC-based toolchains for development support. It’s ideal for a variety of low-power IoT applications such as sensor hubs, loggers, video streaming, Wi-Fi & Bluetooth devices, home automation, and mesh networks, targeting makers, hardware engineers, software engineers, and solution providers.
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32 4M 32Mbit Flash WiFi Bluetooth Module
- ESP32-D0WD core
- Supports multiple external QSPI flash and SRAM chips
- 32Mbits 3.3V SPI flash
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- Bluetooth v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32 8M 64Mbit WiFi Flash Bluetooth Module
- ESP32-D0WD core
- Supports multiple external QSPI flash and SRAM chips
- 32Mbits 3.3V SPI flash
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- Bluetooth v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32D 16M 128Mbit Flash WiFi Bluetooth Module
- Xtensa 32-bit LX6 microprocessors
- 1 Kbit of EFUSE, 256 bits MAC
- WiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
- Bluetooth v4.2 BR/EDR and BLE specification
- Wi-Fi mode Station/softAP/SoftAP+station/P2P
- Operating voltate: 2.2-3.6V
- Current Consumption: 80 mA
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32D 4M 32Mbit Flash WiFi Bluetooth Module
- Xtensa 32-bit LX6 microprocessors
- 1 Kbit of EFUSE, 256 bits MAC
- WiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
- Bluetooth v4.2 BR/EDR and BLE specification
- Wi-Fi mode Station/softAP/SoftAP+station/P2P
- Operating voltate: 2.2-3.6V
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32D 8M 64Mbit WiFi Flash Bluetooth Module
- Xtensa 32-bit LX6 microprocessors
- 1 Kbit of EFUSE, 256 bits MAC
- WiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps)
- Bluetooth v4.2 BR/EDR and BLE specification
- Wi-Fi mode Station/softAP/SoftAP+station/P2P
- Operating voltate: 2.2-3.6V
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32E 16M 128Mbit Flash WiFi Bluetooth Module
- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- WiÂFi: 802.11b/g/n
- Bit rate: 802.11n up to 150 Mbps
SKU: n/a -
IoT and Wireless
Espressif ESP32-WROOM-32E 4M 32Mbit Flash WiFi Bluetooth Module
- ESP32-D0WD-V3 embedded, Xtensa dual-core
- 32-bit LX6 microprocessor, up to 240 MHz
- 448 KB ROM for booting and core functions
- 520 KB SRAM for data and instructions
- 16 KB SRAM in RTC
- WiÂFi: 802.11b/g/n
- Bit rate: 802.11n up to 150 Mbps
SKU: n/a
