Basic Electronic Components
Showing 145–168 of 919 results
-
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2116-H-RC 2208 High Current Toroid Inductors
-19%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2116-H-RC 2208 High Current Toroid Inductors
2116-H-RC 2208 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2121-H-RC 1950 High Current Toroid Inductors
-19%Basic Electronic Components, Electronic Components, Wire Wound Inductors2121-H-RC 1950 High Current Toroid Inductors
2121-H-RC 1950 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2124-H-RC 2131 High Current Toroid Inductor
-21%Basic Electronic Components, Electronic Components, Wire Wound Inductors2124-H-RC 2131 High Current Toroid Inductor
2124-H-RC 2131 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2200HT-220-V-RC 2115 High Current Toroid Inductors
-19%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2200HT-220-V-RC 2115 High Current Toroid Inductors
2200HT-220-V-RC 2115 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Applications:
- Tuning circuits.
- Sensors.
- Store energy in a device.
- Induction motors.
- Transformers.
- Filters.
- Chokes.
- Ferrite beads
Note: Actual product can vary from the shown image
Features:
- High-temperature rating up to +200 °C
- Low magnetic radiation
- High current capacity
- Horizontal or vertical mount available
- Low cost
- Operating temperature: -55 to +200 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2200HT-221-V-RC High Current Inductor
-16%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2200HT-221-V-RC High Current Inductor
2200HT-221-V-RC High Current Inductor, 220UH, 4.3A, 15%
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand and value printed
Package Includes:
1 x 2200HT-221-V-RC High Current Inductor
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2218-H-RC 2115 High Current Toroid Inductors
-17%Basic Electronic Components, Electronic Components, Wire Wound Inductors2218-H-RC 2115 High Current Toroid Inductors
2218-H-RC 2115 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2305-V-RC 2103 High Current Toroid Inductors
-12%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2305-V-RC 2103 High Current Toroid Inductors
2305-V-RC 2103 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2306-V-RC 2138 High Current Toroid Inductors
-14%Basic Electronic Components, Electronic Components, Wire Wound Inductors2306-V-RC 2138 High Current Toroid Inductors
2306-V-RC 2138 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can varry from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2316-V-RC 1945 High Current Toroid Inductors
-20%
Basic Electronic Components, Electronic Components, Wire Wound Inductors2316-V-RC 1945 High Current Toroid Inductors
2316-V-RC 1945 High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
Note: Actual product can vary from shown image
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components, Electronic Components, Wire Wound Inductors
2324-V-RC 2208 High Current Toroidal, Leaded Inductor
-20%Basic Electronic Components, Electronic Components, Wire Wound Inductors2324-V-RC 2208 High Current Toroidal, Leaded Inductor
2324-V-RC 2208High Current Toroidal DIP Inductor is a passive electronic device widely used in electronic circuits. It is an insulated coil that is a wire wound on a ring-shaped form that is made of different materials, such as powdered iron, ferrite, or another material.
A toroidal inductor is mostly used where large inductance is required. Toroidal inductors have more inductance per turn and can carry more current than solenoids with a core of similar material and size
High CurrentToroid Inductors 2300 Series Table
Features:
- DC/DC converter, EMI filter applications
- Low radiation
- Low core loss
- High current capacity
- Horizontal or vertical mount
- Low cost
- Operating temperature -55 to +105 °C
SKU: n/a -
Basic Electronic Components
24V 40W Reprap Cartridge Heater Wire 1 Meter
A 24V 40W Reprap Cartridge Heater Wire is a cylindrical stainless steel tube that resists corrosion. It has a ceramic core with a heating wire wound around it. The number of coils depends on the power and ensures even heat distribution, which improves the heater’s durability and prevents the wire from oxidizing at high temperatures. This heater can heat solids, liquids, and gases by conduction if it is in direct contact with them. It is widely used to make plastic and rubber parts in the car industry or the food processing industry, etc.
Application:
- Semiconductor chamber heating
- Semiconductor wafer lead connection
- Semiconductor wire and die bonding
- Humidity Control
- Patient Comfort heating used in medical devices
- Mold die and platen heating
- Test sample heating in gas chromatography
SKU: n/a -
Basic Electronic Components
26 Teeth Universal Stainless Steel Extrusion Gear for 3D Printer
This extruder drive gear has 26 teeth and fits into extruder assemblies. It grips the 3D printing filament firmly and moves it towards or away from the hotend assembly. It can handle high torque without harming the filament, and it attaches easily to the shaft of NEMA 17 stepper motors. It helps with consistent extrusion.
These extruder drive gears are suitable for all types of 3D printer extruders. They move the filament into the melt zone when extruding and pull it back when the hotend is moving over the print bed. This results in smooth and consistent extrusion, better print quality, and less risk of clogging or other issues. This is a simple but essential part of the extruder system. It balances the back-pressure of the melted filament in the hotend assembly.
The extruder drive gear is designed for the TEVO Tarantula, but it can work with many other similar 3D printers, or even different machines. It is made of brass, which is durable but soft enough to protect the filament. It has a small size and does not need any extra modifications to fit.
SKU: n/a -
Basic Electronic Components
2Pin Round Pushbutton SPST Straight Tactile Micro Switch Through Hole (Pack of 5)
-33%
Basic Electronic Components2Pin Round Pushbutton SPST Straight Tactile Micro Switch Through Hole (Pack of 5)
2Pin Round Pushbutton SPST Straight Tactile Micro Switch Through Hole
A small SPST switch with two pins and a tactile micro button
Features- Bounce Time: 10 msec.
- SPST momentary ON
- Contact Resistance: 100mohm.
- Lead type: PC
- Rating: DC 12V 50mA
- Operating Force: 160±30 or 250±50gf
- Travel: 0.3±0.15mm
- Contact Resistance: 100mohm MAX.
- Life Cycles: 100,000 Cycles MIN
SKU: n/a -
Basic Electronic Components
30 A Brushed ESC with Brake
30 A Brushed ESC with Brake
This ESC features a brake switch and supports forward and backward functions. It is compatible with 130/180/260/280/380 brushed motors and can be used in 1/16, 1/18, 1/24 scale RC cars, boats, and tanks.
Features:
- Support forward, backward, with the brake switch.
- Be suitable for 130/180/260/280/380 brush motors, 1/16 1/18 1/24 RC car/ boat/ tank.
- Replacement for HSP Redcat Traxxas Tamiya HPI rc4wd axial RC cars.
- Voltage support: 4~8V.
- Forward 30A
- Instantaneous peak value 40A
- Backward 20A
- Brake 40A
- UBEC output: voltage 5.7V, current 1A.
SKU: n/a -
Basic Electronic Components
300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
-60%
Basic Electronic Components300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
The 300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.
Features :
- 4 Start Lead Screw
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
SKU: n/a -
Basic Electronic Components
300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module
-62%
Basic Electronic Components300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module
300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module
The 300W 10A DC-DC Step-down Buck Converter Adjustable Constant Voltage Module can be used to get adjustable output voltage ranges from 1.5V to 35V. The module provides a wide range of current output up to 10 A. With heat sink mounted it can easily manage to run high power application continuously (provided that for continuous high power output you need to use a cooling fan on the heat sink).
The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20C to 100C constant current 1A, temperature drift less than 1%); and therefore it is particularly most suitable for LED driver applications. The output current of the module can be raised up to 10A(for continuous use it is recommended up to 8A with additional cooling fan).
To enhance the stabilization in output voltage has four high-frequency capacitance which gives the lower output ripple. Double heat sink design provides easy and fast heat dissipation. MOS Schottky diode independent heat sink, which heat dissipation is good, and wont affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.
SKU: n/a -
Basic Electronic Components
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
-56%
Basic Electronic Components300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
The 300W 20A DC-DC Step-down Adjustable Constant Current Module can be used to get adjustable output voltage ranges from 1.2V to 36V. The module provides a wide range of current output up to 20 A. With the heat sink mounted it can easily manage to run high power applications continuously (provided that for continuous high power output you need to use a cooling fan on the heat sink).
The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%); and therefore it is particularly most suitable for LED driver applications. The output current of the module can be raised up to 20A(for continuous use it is recommended up to 15A with an additional cooling fan).
To enhance the stabilization in output voltage has six high-frequency capacitance which gives the lower output ripple. Double heat sink design provides easy and fast heat dissipation. MOS Schottky diode independent heat sink, which heat dissipation is good, and won’t affect each other. Also using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever.
The module has onboard 3296 multiturn potentiometers for high accuracy voltage and current regulation to provide good stability. As voltage and current are adjustable, it gives very easy to use at multiple Application such as battery charging, LED Driver power supply, Vehicle Power Supply, etc which makes the module Multipurposeand hence this module is always in demand from our maker because of its wide range of application and low cost.
SKU: n/a
