Basic Electronic Components
Showing 193–216 of 225 results
-
Basic Electronic Components, Electronic Components, Uncategorized
HW Battery 9V With Connector For Arduino/ Robotics
-17%
Basic Electronic Components, Electronic Components, UncategorizedHW Battery 9V With Connector For Arduino/ Robotics
Features:-
-
- Model Number: 9V 6F 22.
- Battery Type: Zinc Carbon.
- Size: 6F22 006P.
- Jacket: Metal.
- Single Battery Dimensions (mm): L- 26. 5, H – 48. 5, W – 17. 5 (Max).
- Nominal Voltage(V) :9V.
- Discharge Resistance(Ω): 620.
- Cut-off Voltage(V): 5.4.
specification:-
- DIY projects.
- Electrical/Electronic projects.
- Radios.
- Multimeter.
- And many more.
Package Content:
1 x 9v battery
1 x wire with the battery connector
SKU: n/a -
-
Basic Electronic Components, Electronic Components, Wire Wound Inductors
IMC1210ER100K SMD Wire Wound Inductor
-18%
Basic Electronic Components, Electronic Components, Wire Wound InductorsIMC1210ER100K SMD Wire Wound Inductor
IMC1210ER100K, Wirewound Inductor, 10 µH, 2.1 ohm, 33 MHz, 189 mA, 1210 [3225 Metric], IMC-1210
Note:
- For more technical details, go through the datasheet in the attachments
- Image may vary from actual product in terms of brand
Package Includes:
1 x IMC1210ER100K SMD Wire Wound Inductor
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
INR18650 M26 2600MAH Lithium-Ion Battery
-53%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsINR18650 M26 2600MAH Lithium-Ion Battery
INR18650 M26 2600mAh Lithium-Ion Battery comes with a rated voltage of 3.7 volts and a capacity of 2600mAh. It is a single cell, compact, and powerful battery cell with 2600 mAh capacity. It is very convenient to install in your project to fulfill the 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or they can be permanently soldered to your application’s power source wires.
Features:
- Battery Type: Lithium-Ion Battery
- Shape: Cylindrical Battery
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
- No memory effect
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Lightweight, small size
- High performance and capacity
- Flat top to suit many devices fitting.
Package Includes:
1 x INR18650 M26 2600mAh Lithium-Ion Battery
SKU: n/a -
Basic Electronic Components, DIY Learning and Robot Kits, Sensors
L298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
-50%
Basic Electronic Components, DIY Learning and Robot Kits, SensorsL298N 2A Based Motor Driver Controller Module+100RPM Dual Shaft BO Motor (4pcs)+4 x 65mm Robot Wheel-Combo
- L298N Motor Driver Controller Module is a high power motor driver for driving DC and Stepper motors. It can control upto 4 DC motors, or 2 DC motors with directional and speed control. This motor driver is for robotics and mechatronics projects. The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of standard grade rubber.
- L298N: Current Sense for each motor | Heatsink for better performance | Power-On LED indicator | Directional control | Speed control | High power motor || BO motor: Low density and inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Relatively low coefficient of friction || Wheel: Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Dimensions: L298N(LxWxH):44x44x28mm | Shaft length:7mm | Shaft Diameter:5.5mm | Motor(LxWxH):55x48x23mm | Diameter of wheel:65mm | Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The L298N motor driver is perfect for robotics and mechatronics projects. It can also be used for controlling motors from microcontrollers, switches, relays, etc. It is capable of driving DC and Stepper motors for micro mouse, line following robots, robot arms, etc. The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65mm wheel is only compatible with BO motor.
- L298N: Input Voltage:3.2V-40V DC | L298N Dual H-Bridge DC Motor Driver | Operating voltage:DC 5V-35V | Peak Current:2Amps | Speed Control:PWM | Control Signal input voltage range:0.3V≤Vin≤1.5V (Low), 2.3≤Vin≤Vss (High) | Max. power consumption:20W (when the temperature T=75℃) || BO Motor: Operating Voltage:3 to 12V | Current (without loading):40-180mA | RPM:100 | Output Torque:0.8 kgcm | Motor Design: L-shaped || Wheel: Loading Capacity (kg):2.5 | D hole For BO Motor (mm):6
SKU: n/a -
Basic Electronic Components
Large Size Piezoelectric Buzzer Beeper Alarm – Good Quality
- Product: Piezo Buzzer Alarm
- Type: Piezoelectric Buzzer
- Length: 15mm
- Diameter: 30 mm
- Voltage: 5-20v
- Current: <25MA
- Colour: Black
Application
Security and safety products
Portable devices
Medical equipment
Remote monitoring systems
Timers
Household appliances
Measurement and flow instruments
Weighing machines
User input recognition
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
Leadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
-30%
Basic Electronic Components, Electronic Components, PCB AdapterLeadfree so/msop/tssop/soic/sop8 to dip8 Wide-Body Narrow-Body Adapter Board PCB 8p – Pack of 5
SO/MSOP/TSSOP/SOIC/SOP8 packages are mostly used in Opamps, 555 times Memory ICs which work in low space and high functioning environment. But if you are using any microcontroller IC for prototyping, they are mostly available in DIP packages and while prototyping you need to connect various components with Jumper wires and breadboard. For making the prototyping easier and saving you the trouble of soldering and desoldering this SO/MSOP/TSSOP/SOIC/SOP8 to DIP package PCB Transfer Board is something you can use while prototyping for rapid circuit design and testing. You can also connect the legs of the DIP package Microcontrollers in it and It will work just fine or you can use the jumper wires for it too.
This PCB has two sides one for 1.27mm spacing SO8, SOP8, SOIC8 packages and the other for 0.65mm SSOP8, TSSOP8, MSOP8 package. You just need to solder the IC and the board itself and take out the DIP connections by either using a breadboard or using Jumper wires.
- Pin spacing of 1.27mm, suitable for the common SO8, SOP8, SOIC8 package transfer into DIP8 upright
- Pin spacing of 0.65mm, suitable for common SSOP8, TSSOP8, MSOP8 encapsulation transfer into DIP8 upright
- Low cost and easy to use
Specifications:
- Dimensions: 12 x 12 mm.
- Pitch: 0.4 mm.
Features:
- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size is 1.27mm, It can be used for most of the SO, SOP, SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP, TSSOP, MSOP to 2.54mm DIP.
Note: Header pins are not included in the Package.
Package Includes :
1 x SO/MSOP/TSSOP/SOIC/SOP8 to DIP8 PCB Board
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
Li-Ion 14500 3.7V 500MAH Battery-1C
-65%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLi-Ion 14500 3.7V 500MAH Battery-1C
Li-Ion 14500 3.2V 500MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with a 500 mAh capacity. It is very convenient to install in your project to fulfill a 3.2 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or they can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape: Cylindrical Battery
- Battery Type: Lithium-Ion Battery
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
(Note: Voltage mentioned on battery may be 3.2-3.7)
Package includes:
1x Li-Ion 18650 3.2V 2000MAH Battery-1C
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
Li-Ion 18650 3.7V 2200MAH Battery-1C – XTT
-60%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLi-Ion 18650 3.7V 2200MAH Battery-1C – XTT
This Li-Ion 18650 3.7V 2200MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2200 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or it can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape: Cylindrical Battery
- Battery Type: Lithium-Ion Battery
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
Package includes:
1x Li-Ion 18650 3.7V 2150MAH Battery-1C
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, Uncategorized
Li-Ion 26650 3.7V 5000MAH Battery
-30%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, UncategorizedLi-Ion 26650 3.7V 5000MAH Battery
Li-Ion 26650 3.7V 5000MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with a 5000 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible battery adapter/holder or they can be permanently soldered to your application’s power source wires.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
- High energy density
- High working voltage for single battery cells.
- Pollution-free, Long cycle life
- No memory effect
- Lightweight, small size
- Shape: Cylindrical Battery
- Battery Type: Lithium-Ion Battery
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, Uncategorized
LI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
-33%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components, UncategorizedLI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.1S 3A BMS is Small size, suitable for many requirements of high integration, low cost. Lithium-Ion Battery for robotic applications. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. In this kit, there is a 1x2200mah rechargeable cell with a 1S 3.7V 3A Battery Protection Circuit. So the user can very easy to make it Battery with Protection Circuit.
Features:
- 1×3.7V 2150mAh Battery
- Low maintenance
- Long life with full capacity for up to 1000 charge cycles
- the high-accuracy voltage detection circuit
- the terminal of the charger using high voltage device
- The built-in three-stage over-current detection circuit
- MOS transistor can control the battery charge and discharge
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over-discharge voltage:2.54±0.1V
- Over-current protection: 3A
Bms solder Instructions:
- B+ connected to the battery positive.
- B- take the battery.
- P+ input to the positive battery output
- P- battery negative input output
Package Includes:
1 x Li-Ion 2150mah cell
1 x charger protection circuit
SKU: n/a -
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
Lithium-Ion Battery Li-Ion 2200MAH 11.1V Rechargeable Battery 1C with BMS charge protection
-20%
Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLithium-Ion Battery Li-Ion 2200MAH 11.1V Rechargeable Battery 1C with BMS charge protection
This battery pack provides a higher energy density per unit volume and unit weight. The offered battery pack is manufactured using high-grade components as well as pioneered technology under the strict supervision of adroit professionals. The provided battery pack is precisely examined by our quality auditors onset measures of quality to ensure its high functionality.
This battery can be directly connected with Arduino Uno.
Features:
- High performance and capacity
- High energy density.
- Excellent storage performance and low self-discharge rate
- Environmentally
- Capacity, resistance, Voltage, platform time consistency is good.
- Good consistency and low self-discharge.
- Flat top to suit many devices fitting.
Application:
- Portable equipment: POS, Portable printer, handset.
- Medical instrument: B ultrasound, Ecg monitoring instrument
- Military equipment: IR telescope
- Consumer electronics:PDA,MID,laptop,emergency light power source
- power tool e-bicycle
- Industrial and commercial instrument: light power meter, Gas testing instruments, fusion splicer, flaw detector
- Electric toy:RC car/ boat/helicopter
SKU: n/a -
Basic Electronic Components, Electronic Components, IoT and Wireless
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
-48%
Basic Electronic Components, Electronic Components, IoT and WirelessLoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Module Model: LoRa-RA-02, Input Supply Range: 2.5 ~ 3.7VDC, Interface: SPI, Programmable bit Rate: UP to 300Kbps
- Antenna Type: IPEX, Frequency Range: 410-525 MHz, Transmit Power: 18±1 dBm (Max), Operating Temperature: -10 to 85°C, LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change, High sensitivity: down to -148dBm, Half-duplex SPI communication, Programmable bit rates up to 300kbps, Supports FSK, GFSK, MSK, GMSK, LoRa, and OOK modulation modes
- 127dB RSSI dynamic range, Automatic RF signal detection, CAD model, and very high-speed AFC, Packet engine with CRC up to 256 bytes, Small footprint dual-row stamp-hole patch package; Dimension: Length-28mm, Width-20mm, Height-5mm, Weight-7gm
SKU: n/a -
Basic Electronic Components, Electronic Components
MB102 830 Points Solderless Prototype PCB Breadboard
-22%
Basic Electronic Components, Electronic ComponentsMB102 830 Points Solderless Prototype PCB Breadboard
An MB102 830 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.
Features :
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Completely reusable
- Colored coordinates for easy components placement.
- Phosphor bronze nickel plated spring clips.
- Accept a variety of wire sizes 20-29 AWG
SKU: n/a -
Uncategorized, Basic Electronic Components, Electronic Components
Multi-purpose Hot Melt Glue Sticks for Glue Gun – 1 Pcs
-40%
Uncategorized, Basic Electronic Components, Electronic ComponentsMulti-purpose Hot Melt Glue Sticks for Glue Gun – 1 Pcs
Features:
For Almost All Bonding Jobs… Trigger-Feed For Even Glue Flow.
Perfect For Home Repairs Hobbies And Crafts.
How to Use
- Plug-In Gun. Load The Glue Sticks Into The Back Of The Gun.
- Press Trigger Several Times Until The Glue Stick Is Firmly Set Into The Inlet Tube
- Allow The Glue Gun To Warm Up For Approx.5 Minutes (Depend on Glue Gun)
- Squeeze Trigger Until Glue Flows From Nozzle Some Examples Of Usage: Repair Holes In Window Screens Reattach The Float For A Tank After Its Mount Corroded Away Repair Broken Tail Light Covers On Cars Reattach Trim On Cars Reattach
Package Content:
1 x Multi-purpose Hot Melt Glue Sticks for Glue Gun
SKU: n/a -
Basic Electronic Components
Noel 50W Soldering Iron
Noel 50W Soldering Iron is popular among the makers who need heavy-duty soldering in less time. The best quality material provides superior operation and safety to the user while handling heavy soldering.
Features:
- Power consumption: 50W
- Operating Voltage: AC 230 V
- Tip to ground resistance: under 2W
- Tip to ground potential: under 2mv
- Advanced ceramic type heating element.
- Applicable to a wide range of applications.
- Quick in attaining working temperature.
- Constant tip temperature.
- Low leakage current.
- Thinner grip for comfortable use.
- Easy and convenient tip and element replacement.
- Specially coated long-life soldering bits/tips.
- Different shapes/types of bits/tips available.
- Reasonably priced spare parts.
Package Includes:
1 x Noel 50W Soldering Iron
SKU: n/a -
Basic Electronic Components
Noel Metal Desoldering Pump
Noel Desoldering Pump Metal is a very popular tool amongst industrial users. The usability of the desoldering pump is very easy, smooth, and simple.
It is also called a Solder Sucker.
This metal desoldering pump is a very loyal and trustworthy tool for its users in segments of Electronics and power electronics.
Features:
- Light Weight
- High Suction Power
- Ideal for P.C. Board Repairing
- Change tips simply by turning tips counterclockwise
Package Includes:
1 x Noel Metal Desoldering Pump
SKU: n/a -
Basic Electronic Components
Noel Solder Wire 60/40 – 50gm
Noel Solder Wire is a fusible metal alloy used to join together metal workpieces and having a melting point below that of the workpiece(s).This solder wire has good solderability, insulation resistance, No spattering, and non-corrosive. Its composition is 60:40 of Tin and Lead respectively. Widely used in electrical and electronics, solder parts like a circuit board, electronics devices, and others.Feature:
- Halide-free solder wire, and suitable for the repair operation
- Used in the tin-lead process
- Fast melting, good wetting, and expansibility.
- No break for the core, no splash, and no odor.
- Good solderability and soldering joints with high brightness and strength
- Good mechanical performance
- The residue is easy to remove by hot air after soldering work if necessary
- Rosin core solder
Package Includes:
1 x Noel Solder Wire 60/40 – 50gm
SKU: n/a -
Basic Electronic Components, DIY Kits, DIY Learning and Robot Kits, Electronic Components, Electronic Hobby Kit, Electronic Modules and Displays
Plusivo Hook Up Wire Kit Plusivo 20AWG Hook Up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colours x 7M
-50%
Basic Electronic Components, DIY Kits, DIY Learning and Robot Kits, Electronic Components, Electronic Hobby Kit, Electronic Modules and DisplaysPlusivo Hook Up Wire Kit Plusivo 20AWG Hook Up Wire Kit – 600V Pre-Tinned Stranded Silicon Wire of 6 Colours x 7M
Package Included:
- 1 x Black Wire (23ft)
- 1 x Yellow Wire (23ft)
- 1 x Green Wire (23ft)
- 1 x Blue Wire (23ft)
- 1 x White Wire (23ft)
- 1 x Heatshrink Tubes for each color
- 1 x Colored Wire Ties for each color
- 1 x Mini Wire Stripper Tool
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
QFN 56 64 SMD TURN TO DIP PCB Adapterberak
-33%
Basic Electronic Components, Electronic Components, PCB AdapterQFN 56 64 SMD TURN TO DIP PCB Adapterberak
This is a QFN 56 64 SMD TURN TO DIP PCB Adapter, The SMD adapter/reduction for SMF components QFN56 or QFN64. It is a Double-sided through-line printed circuit board with a non-stick mask and printing. On one side to brazing the QFN56 square circuit, on the other side of the square circuit QFN64.
Specifications:
- Dimensions: 33.14 x 33.14 mm.
- Pitch Patch: 0.5 mm.
Package Includes:
1 x QFN 56 64 SMD TURN TO DIP PCB Adapter.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
QFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter
-8%
Basic Electronic Components, Electronic Components, PCB AdapterQFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter
This double-sided pinboard features one side of the patch is 16 pin -80 pin turn DIP, 0.5mm spacing and the other side is 40 pin -64 pin, pitch 0.4mm pitch and 80 pins 0.65 spacing. QFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter has unique design makes the board compatible with more models of IC packages QFP Side of the patch 16 pin -80 pin turn DIP, 0.5mm spacing. The other side is 40 pin -64 pin, pitch 0.4mm pitch and 80 pins 0.65 spacing.
Note: The actual subject-specific parameters shall prevail; we can not guarantee that your chip can fit with the item perfect.
Specifications:
- Dimensions: 36 x 36 mm.
- Pitch Patch: 0.4 mm.
- Pin Header: 2.54 mm.
- PCB Color: Blue.
Package Includes:
1 x QFN/ TQFN/ LQFP QFP 16-80 PIN Switch Over DIP Double-sided PCB Adapter.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
QFN24 TO DIP Adapter
QFN24 TO DIP Adapter is a Double-Side PCB Circuit Board, Each PCB board has 24 pins. Aside for pin pitch size 0.5mm, It can be used to convert QFN24 to DIP-24 (2.54mm pin pitch) B side for pin pitch size 0.65mm, It can be used to convert QFN24 to DIP-24 (2.54mm pin pitch).
Package Includes:
1 x QFN24 TO DIP Adapter.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
QFN32 QFN40 SMD to DIP Adapter PCB Board-2Pcs.
-38%
Basic Electronic Components, Electronic Components, PCB AdapterQFN32 QFN40 SMD to DIP Adapter PCB Board-2Pcs.
QFN32 QFN40 SMD to DIP Adapter PCB Board is a very high-quality double-sided adapter PCB for QFN32 on one side and QFN40 on another side with 0.5mm pitch. with the ground plane. suitable for converting QFN32 and QFN40 chips into DIP32 and DIP40 packages for the easy prototype in the breadboard.
This adapter board provides an easier connection with the use of a male pin header type. You can do tests using this adapter and it is useful when you have a chip and have not yet decided what connections you need.
Specifications:
- Dimensions: 41 x 15.5 mm.
- Pitch Patch: 0.5 mm.
Package Includes:
1 x QFN32 QFN40 SMD to DIP Adapter PCB Board-2Pcs.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
QFP/TQFP/LQFP/FQFP/SOP/SSOP32 to DIP Adapter/ Breakout Board
-38%
Basic Electronic Components, Electronic Components, PCB AdapterQFP/TQFP/LQFP/FQFP/SOP/SSOP32 to DIP Adapter/ Breakout Board
The PCB board has two sides. One side for pin pitch size 0.8mm can be used to convert QFP32, TQFP32, LQFP32, or FQFP32 to DIP32 2.54mm. Another side for pin pitch size 0.8mm can be used to convert SOP32, SSOP32 to DIP 2.54mm.
Specifications:
- Dimensions: 25.5 x 25.5 mm.
- Pitch Patch: 0.8 mm.
- Pin Header: 2.54 mm.
Package Includes:
1 x QFP/TQFP/LQFP/FQFP/SOP/SSOP32 to DIP Adapter PCB Board Converter.
SKU: n/a
