Sensors
Showing 625–648 of 995 results
-
Sensors
Orange 8mm PNP Inductive Proximity Sensor RM18 DC6~36V (Unshielded)
- Operating Voltage (VDC): 6 ~ 36.
- Detection Distance (mm): 8.
- Outer Thread Size: M18.
- Object Type: Inductive.
- Output Type: PNP Normally Open Three-line.
- Installation Type: Non-Flush (Unshielded).
- Max Output Current: 200 mA.
- Setting Distance (mm): 0 ~ 5.6.
SKU: n/a -
Sensors
PAJ7620 Gesture Recognition Sensor
- The supply voltage is 2.8V- 3.3V and I/O voltage is 1.8V~3.3V
- Nine gesture recognition (Up / Down / Left / Right / Push / Pull / CW / CCW / Wave)
- Gesture speed is 60°/s to 600°/s in Normal Mode and 60°/s to 1200°/s in Gaming Mode
- Ambient light immunity: < 100k Lux
SKU: n/a -
-
-
-
Sensors
PIR Motion Detector Sensor Module
The HC-SR501 PIR Motion Detector Sensor Module is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin.
The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer.
It is used to sense the movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
Features:
- Compact size
- Infrared sensor: dual-element, low noise, high sensitivity
- Blockade time: 2.5s (Default)
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
SKU: n/a -
-
Sensors
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
- Power supply voltage: DC5 ± 2V
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
SKU: n/a -
-
Sensors
PN532 NFC RFID Read / Write Module V3 Kit
- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
SKU: n/a -
Sensors
PS-3150 High Speed AT10-30 220V 500mA Stable Switch Normally Open Proximity Magnetic Sensor Reed Switch
-29%
SensorsPS-3150 High Speed AT10-30 220V 500mA Stable Switch Normally Open Proximity Magnetic Sensor Reed Switch
- Switching power (maximum): 10 W
- DC switching voltage (maximum): 220V
- AC switching voltage, RMS (maximum): 220V
- DC switching current (maximum): 500mA
- AC switching current, RMS (maximum): 500mA
- Breakdown Voltage (Minimum): 250V
- Contact Resistance (initial max): 200mW
SKU: n/a -
Sensors
PT100-S Waterproof 1m 30mm Stainless Steel Probe Temperature Sensor
- Model number: FTARP05 series
- Mounting form Polish rod probe
- The Probe material: Stainless steel
- Probe diameter: 4mm
- Length of the probe: 30mm
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated)
- Accuracy ±(0.3°C+0.5%|t|)
- Thermal response time: <0.5s
SKU: n/a
