No products in the cart.
Up to 70% OFF on | Fast Delivery Across India Dismiss
Top picks this week. Up to 50% off the best selling products.
| Item Type: | Development Board |
| Model Name: | S7-50 |
| USB Interface (Y/N) | USB-JTAG |
| Memory: | 128MB |
| Input Voltage | 5v |
| Shipping Weight | 0.085 kg |
| Shipping Dimensions | 11 × 09 × 03 cm |
| Weight | 50 kg |
|---|
| Item Type: | Programmer |
| RAM: | 2GB |
| Microprocessor | Altera |
| Architecture | CPLD/FPGA |
| Connector: | USB |
| Length (mm): | 65 |
| Width(mm) | 55 |
| Height(mm): | 15 |
| Weight (g): | 113, 113 g |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 5 cm |
| Item Type: | Programmer |
| Data Transfer Rate | 24 MHz |
| Connector Type: | USB Type A to B |
| Cable Type: | USB |
| Dimensions (L x W x H) mm | 107 x 52 x 20 |
| Weight (g): | 58g |
| Shipping Weight | 0.21 kg |
| Shipping Dimensions | 17 × 15 × 4 cm |
| Item Type: | Development Board |
| RAM: | 512MB |
| Model Series: | Digilent |
| RAM Capacity: | 512MB |
| Product | Cora Z7: Zynq-7000 Development Board |
| Item Type: | Development Board |
| Model Series: | Digilent |
| SRAM | 512 KB |
| QSPI flash/SRAM | 4MB |
| Input Voltage (V): | 3.3-5.5 |
| Total I/O pins | 48 |
| Push Buttons | 2 |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 8 × 3 × 3 cm |
| Item Type: | Development Board |
| Flash | 32Mbits NOR Flash |
| Memory: | 128M DDR3 |
| Core Architecture | Gowin GW2A-LV18PG256C8/I7 FPGA |
| Logical unit | 20,736 LUT4 units |
| SRAM | 41,472 bits distributed SRAM + 828K bits block SRAM |
| SDRAM | 128MB DDR3 external memory |
| No. of PLLs | 4 |
| Display: | 8Pins spi lcd connector |
| SD Card Slot | 1 × Push-pull SD card slot |
| Item Type: | Development Board |
| Flash Memory: | 16MB |
| RAM: | 8MB |
| Memory: | 16MB Flash |
| Processor Type: | Cortex-M3 |
| MCU Type | ESP32-S3R8 Dual-core LX7 microprocessor |
| Connectivity: | 2.4 GHz Wi-Fi & Bluetooth5 (LE) |
| Development Board | Arduino, Platforml0-IDE, Micropython |
| Processor | Cortex-M3 |
