- Model: OE-775
- Connector Type: JST XH
- Connector: Female
- Pin/Wire: 4
- Cable thickness: 26AWG
- Cable Length: 30 cm
Replacement cable for Orange OE-775 Hall Effect Two Channel Magnetic Encoder
- Model: OE-775
- Connector Type: JST XH
- Connector: Female
- Pin/Wire: 4
- Cable thickness: 26AWG
- Cable Length: 30 cm
₹129.00 ₹179.00
Related products
-
Batteries | Chargers and Accessories
Orange 10000mAh 3S 35C/70C (11.1V) Lithium Polymer Battery Pack
-10%Batteries | Chargers and AccessoriesOrange 10000mAh 3S 35C/70C (11.1V) Lithium Polymer Battery Pack
0 out of 5(0)- Model No: ORANGE 10000 3S
- Voltage: 11.1V
- Max Continuous Discharge: 35C
- Balance Plug: JST-XH
- Discharge Plug: XT-60
SKU: n/a -
Uncategorized, Basic Electronic Components, Batteries | Chargers and Accessories, Electronic Components
LI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
-33%Uncategorized, Basic Electronic Components, Batteries | Chargers and Accessories, Electronic ComponentsLI-ION 3.7V 2150MAH WITH Charger Protection Circuit Kit LI-ION
0 out of 5(0)Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, for a variety of various shapes 3.7 V lithium-Ion batteries.1S 3A BMS is Small size, suitable for many requirements of high integration, low cost. Lithium-Ion Battery for robotic applications. Very lightweight and small size compared to Ni-Cd, Ni-MH and Lead-acid batteries. Very long life without losing charging capacity. In this kit, there is a 1x2200mah rechargeable cell with a 1S 3.7V 3A Battery Protection Circuit. So the user can very easy to make it Battery with Protection Circuit.
Features:
- 1×3.7V 2150mAh Battery
- Low maintenance
- Long life with full capacity for up to 1000 charge cycles
- the high-accuracy voltage detection circuit
- the terminal of the charger using high voltage device
- The built-in three-stage over-current detection circuit
- MOS transistor can control the battery charge and discharge
- Overcharge voltage: 4.25±0.05V
- Overcharge release voltage:4.23±0.05V
- Over-discharge voltage:2.54±0.1V
- Over-current protection: 3A
Bms solder Instructions:
- B+ connected to the battery positive.
- B- take the battery.
- P+ input to the positive battery output
- P- battery negative input output
Package Includes:
1 x Li-Ion 2150mah cell
1 x charger protection circuit
SKU: n/a -
Batteries | Chargers and Accessories, Drone Accessories
1000mah 11.1v 25C 3S Build Power Lipo Battery
-32%Batteries | Chargers and Accessories, Drone Accessories1000mah 11.1v 25C 3S Build Power Lipo Battery
0 out of 5(0)This 3 cell Build Power lipo battery with 1000mah of capacity and 25C of discharge rate comes with XT60 Connector. This lipo battery is compatible with all types of DIY drones or Multi-Rotor.
Features:
- Battery parameter: Build Power 11.1V 1000MAH 25C
- Capacity: 1000mah
- Continuous Discharge Rate: 25C
- Plug Style: XT60 Plug
- This is a lithium polymer battery and it is also rechargeable.
- There are 3s cells.
Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high-temperature condition.
- Don’t throw it into the fire.
- Don’t throw it into the water.
Package Includes:
1 x 1000mah 11.1v 25C 3S Build Power Lipo Battery.
(Note: Lipo Batteries are very sensitive hence does not cover any warranty )
SKU: n/a -
Batteries | Chargers and Accessories
Orange 1300mAh 3S 30C/60C (11.1V) Lithium Polymer Battery Pack
-7%Batteries | Chargers and AccessoriesOrange 1300mAh 3S 30C/60C (11.1V) Lithium Polymer Battery Pack
0 out of 5(0)Model No: ORANGE 1300/3S-30CVoltage : 11.1VConstant Discharge : 30C(10.5A)Max discharge : 40C (10 sec)Dimensions : 74 x 34 x 22 (LxWxH)(mm )Weight : 107 gm
Charge Rate : 1-3C Recommended, 5C MaxSKU: n/a
Reviews
There are no reviews yet