No products in the cart.
Top picks this week. Up to 50% off the best selling products.
Don't miss this special opportunity today.
Showing 1–16 of 63 resultsSorted by latest
| Item Type: | Development Board |
| RAM Capacity: | 1024kB |
| Processor Type: | ARM Cortex-M7 |
| Model: | Teensy 4.0 |
| Microcontroller: | NXP i.MX RT1062 |
| Storage | 2048KB Flash |
| Clock Speed | 600MHz |
| Core: | ARM Cortex M7 |
| Flash Memory: | 16MB |
| RAM: | 1MB |
| Rated Speed (MHz): | 600 |
| Analog Input | Unspecified |
| Digital I/O Pins | Unspecified |
| Processor | iMXRT1062 |
| Core: | ARM Cortex M7 |
| Flash Memory: | 2mb |
| RAM: | 1MB |
| Rated Speed (MHz): | 600 |
| Analog Input | 14 |
| Digital I/O Pins | 40 |
| Processor | iMXRT1062 |
| Shipping Weight | 0.45 kg |
| Shipping Dimensions | 22 × 15 × 5 cm |
| Shipping Weight | 0.011 kg |
| Shipping Dimensions | 9 × 6 × 1 cm |
| Item Type: | Development Board |
| Model: | NAE CW310 K410T SCA |
| Memory: | SRAM + DDR3 |
| Configuration: | SAM3X MCU via USB |
| Variant | SCA (No decoupling capacitors) |
| Interface: | USB PHY, Ethernet MAC, JTAG |
| Microcontroller: | SAM3X (monitor MCU) |
| Length (mm): | 100 |
| Item Type: | Development Board |
| Model: | NAE CW310 K410T NORM |
| Memory: | SRAM + DDR3 |
| Interface: | USB Host PHY, Ethernet MAC, JTAG |
| Microcontroller: | SAM3X (for FPGA control) |
| Cooling Fan | Cross-flow fans (no heatsink required) |
| Length (mm): | 100 |
| Width (mm): | 100 |
| Weight (g): | ~200 |
| Item Type: | Development Board |
| Model: | NAE CW305 04 SOCKET 0.10 X |
| Power Supply | 0.8-1.2V (VCC-INT), 4A, Programmable, 1.8V (VCC-AUX), 1.5A, Fixed, 3.3V (VCC-IO), 2A, Fixed |
| Frequency | 1–200 MHz(PLL Frequency) |
| Interface: | High-speed USB 2.0 (ARM-based) |
| Function: | FPGA configuration, VCC-INT setting, PLL configuration, writing onto data-bus for FPGA(USB function) |
| Supported Languages | Any that can access libusb DLL (C, C++, VB, etc) |
| Length (mm): | 120 |
| Width (mm): | 100 |
| Processor Type: | ARM Cortex-M0 + FPGA |
| Storage | On-board QSPI Flash |
| CPU | ARM Cortex-M0 |
| Interface: | USB Type-C |
| Indicators | 2 × User LEDs |
| Additional: | PMOD-compatible expansion connector, Breadboard-compatible layout |
| Item Type: | FPGA Development Board |
| Model No: | AXVU13P-2FHGB2104I |
| RAM Capacity: | Up to 16GB DDR4 |
| ROM Capacity: | 256MB (2 × 128MB QSPI Flash) |
| Processor Type: | FPGA (Virtex Ultrascale+ XCVU13P) |
| Storage | QSPI Flash (256MB), Expandable via FMC+ and PCIe |
| CPU | Configurable via HDL (No fixed CPU core) |
| Power Supply |
| Item Type: | FPGA Development Board |
| Model No: | ACU4EV |
| Memory: | 4 GB DDR4 (PS) + 1 GB DDR4 (PL) |
| Flash | 32 MB QSPI Flash + 32 GB eMMC Flash |
| No. of I/Os | 54 PS MIOs + 180 FPGA I/Os (84 HD + 96 HP) |
| Operating Temperature (°C): | -40 ~ +85 |
| Supply Voltage | 12V DC |
| Item Type: | FPGA Development Board |
| Model No: | AC7Z020 |
| SoC | AMD/Xilinx Zynq 7000 SoC XC7Z020-2CLG400I |
| FPGA | Xilinx Artix-7, 28nm technology |
| SDRAM | 1 GB (32-bit) |
| QSPI Flash Memory | 32 MB |
| No. of I/Os | 48 PS MIOs, 100 FPGA I/Os (HR) |