Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 3193–3216 of 6097 results
-
Sensors
HR 202 Humidity Detection Sensor Module
- Adjustable Sensitivity, External GND.
- Detect Ambient Humidity.
- Provided with Fixed Bolt Hole, Convenient to Install.
- Power Indicator Light & Digital Output Indication Lamp.
- Using LM393 Chip for Stable Work.
- DO Small Digital Outputs Interface (0 & 1).
SKU: n/a -
Basic Electronic Components
HR202 Humidity Detection Sensor Module
HR202 Humidity Detection Sensor Module
This module uses a high-quality HR202 humidity sensor. The comparator outputs a clear and stable signal with a driving ability of more than 15mA.
The humidity sensor module responds to the environmental humidity. By adjusting the potentiometer, you can set a threshold for the humidity level (i.e. the humidity control). For example, if you want to maintain the ambient humidity at 60%, you can turn the module until the green light is on and the humidity is within the range. When the humidity is above the threshold, the DO output is high and the green light is off.
The DO output can be directly connected to a microcontroller to detect the high and low levels of the signal, which indicate the changes in the humidity of the environment.
The DO output can also drive a relay module to form a humidity switch, which can control other devices to operate in a suitable environment.
The AO analog output of the module can be connected to an AD converter to get a more precise numerical value of the ambient humidity. The module has 3mm screw holes for easy installation.
SKU: n/a -
Batteries | Chargers and Accessories
HTRC T240 DUO RC Charger AC 150W DC 240W 10A
- Product: HTRC T240 DUO RC Charger AC 150W DC 240W 10A
- Input Voltage (V AC): 100-200
- DC Input Voltage Range (V): 11-18
- Charge Power(Watt): AC mode 150W (CH1+CH2=150Watt),DC mode 120W*2 =240W
- Charge Current(A): 0.1-10A *2
SKU: n/a -
Batteries | Chargers and Accessories
HTRC-CH4 Smart Universal Battery Charger
- Input voltage : 5V 2A
- Type-C/MicroDC
- Output Voltage :4.35±0.1%/4.2V±0.1%/1.48V±0.1% 9V(6F22)±0.1%
- Output Current: Li-ion:1000mA*2(High)/500mA*4(Low)
- Ni-MH/Ni-Cd:1000mA*2(High)/500mA*4(Low)
- Size: 126.6mm*97mm*33mm(L*W*H)
- Weight:180g(No battery & cable included)
SKU: n/a -
Batteries | Chargers and Accessories
HTRC-P10 Smart Battery Charger
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
SKU: n/a -
-
Basic Electronic Components, Electronic Components, Uncategorized
HW Battery 9V With Connector For Arduino/ Robotics
-17%
Basic Electronic Components, Electronic Components, UncategorizedHW Battery 9V With Connector For Arduino/ Robotics
Features:-
-
- Model Number: 9V 6F 22.
- Battery Type: Zinc Carbon.
- Size: 6F22 006P.
- Jacket: Metal.
- Single Battery Dimensions (mm): L- 26. 5, H – 48. 5, W – 17. 5 (Max).
- Nominal Voltage(V) :9V.
- Discharge Resistance(Ω): 620.
- Cut-off Voltage(V): 5.4.
specification:-
- DIY projects.
- Electrical/Electronic projects.
- Radios.
- Multimeter.
- And many more.
Package Content:
1 x 9v battery
1 x wire with the battery connector
SKU: n/a -
-
Sensors
HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
-11%
SensorsHW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
SKU: n/a -
-
Basic Electronic Components
HX710B Weighing Scale 24-Bit Analog to Digital Convertor (ADC) IC SMD-8 Package
-57%
Basic Electronic ComponentsHX710B Weighing Scale 24-Bit Analog to Digital Convertor (ADC) IC SMD-8 Package
The HX710B Weighing Scale is a precision 24-bit ADC designed for weigh scales and industrial control systems. It features a built-in low-noise amplifier (PGA) with a fixed gain of 128, providing high-precision measurements. The device offers a simple digital control interface with no need for programming and supports 10SPS or 40SPS data rates. It also includes DVDD and AVDD voltage difference detection and simultaneous 50/60Hz supply rejection for stable operation in noisy environments. The operating voltage range is from 2.6V to 5.5V, and it comes in an 8-pin SOP-8 package.
Features :
24-bit resolution, PGA with gain of 128
Built-in voltage difference detection (DVDD, AVDD)
Low noise, 50/60Hz supply rejection
Selectable 10SPS/40SPS output data rate
Temperature range: -40°C to +85°CSKU: n/a -
Sensors
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
SKU: n/a -
Development Boards
ICSP Programmer Socket – UIC-S
-
No external power needed
-
Power Indicator LED on board
-
Fit perfectly with UIC00A and UIC00B
-
Support 18-pin, 28-pin, and 40-pin 8-bit PIC microcontroller.
-
Selector to program 18-pin or 28-pin&40-pin PIC
-
Come with 40-pin ZIF socket for ease of plug and unplug of PIC
SKU: n/a -
-
-
