Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 3697–3720 of 6090 results
-
Development Boards
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: n/a -
Development Boards
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
- The board is compatible with Mega 2560.
- Â excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA
SKU: n/a -
Basic Electronic Components
Metal Ball Caster Wheel for Small Robotic Car
Metal Ball Caster Wheel for Small Robotic Car
This Metal Ball Caster Wheel in a compact size offers omnidirectional movement capabilities. Featuring a protective metal cap, it serves as an ideal neutral wheel choice for small robots. Enhancing flexibility and comfort in robot mobility, this caster wheel facilitates smoother movement and navigation.
Features:Â
- Â Can be Used on 4WD Tank Robot Smart Car
- MAD Wheel for Robot Smart Car
SKU: n/a -
Propellers
Metal Drive Shaft with Coupler 4 to 4mm for RC Car Boat Vehicle Models 42-55mm
- 100% Brand new and Best
- 100% Brand new and Best
- Made of high performance material, durable in use
- Used for RC hobby vehicle models, rc car, boat
- 1 Piece of Universal Joint Drive Shaft
- Kindly refer the product description before buying the product.
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
MG90S 9g Servo Metal Gear
- Dimensions: 23 x 12.2 x 29mm
- Operating Speed (4.8V no load): 0.11sec / 60 degrees
- Operating Speed (6.0V no load): 0.10sec / 60 degrees
- Stall Torque (4.8V): 2.0 kg/cm
- Stall Torque (6.0V): 2.5 kg/cm
- Temperature Range: 0 to 55 degree C
- Rotation angle: 360 °
- Dead Band Width: 15 Microsecond
- Operation Voltage: 4.8 – 6.0 Volts
- Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane
SKU: n/a -
Basic Electronic Components
MGN12H Sliding Block
An MGN12H Sliding Block is a device that allows smooth and precise linear motion along a guide rail. It is suitable for applications that require high accuracy and stability, such as 3D printing, CNC machining, PCB/IC assembly, and medical equipment. It can also be used in smaller linear sliding devices, such as machine arms, precision measuring instruments, and office automation equipment.
Guide rails are made of bearing steel material. Although they are made to be corrosion-resistant for some extent, they aren’t immune to rusting if improperly stored and handled in high humidity and condensation areas, which significantly cause the rusting of this material. In many cases, you won’t face the problem of rusting until the above handling conditions have been met.
Features:
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
SKU: n/a -
Basic Electronic Components
MGN15H Sliding Block
The MGN15H Sliding Block is a component for linear motion systems. It can slide along a guide rail and provide smooth and accurate movement. It is suitable for applications such as 3D printing, CNC machining, PCB/IC assembly, and more.
Fit for: Semiconductor manufacturing equipment, printed circuit board IC assembly equipment, medical equipment. Also used in machine arm, precision measuring instruments, office automation equipment, and other small linear sliding devices.
Features:
- Good quality.
- Strong and durable.
- The tool is simple and easy to use.
- Beautifully designed.
- Professional and technical.
- The slider could easily and lightly move.
- With a steel ball holder/retainer.
SKU: n/a -
Sensors
MH-Z19 Infrared CO2 Sensor Module for CO2 monitor
- Operating voltage: 3.6 V ~ 5.5V DC
- Average current: < 18 mA
- High sensitivity, high resolution.
- Low energy consumption.
- Output mode: UART and PWM wave.
- Temperature compensation, excellent linear output.
- Good stability and Long lifespan.
- Anti-interference of water vapor.
SKU: n/a -
Basic Electronic Components
MH-Z19C NDIR Infrared Carbon Dioxide Sensor Module
MH-Z19C NDIR Infrared Carbon Dioxide Sensor Module
This is the latest MH-Z19C high-precision infrared CO2 sensor. The effectively measuring range is from 400 to 5000ppm. It is a small size sensor and based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency. Besides, its service life could up to 5 years! It integrates temperature compensation and has ADC on board. Most importantly, the product is easy to use; it is compatible with all types of microcontrollers such as Arduino, Raspberry Pi etc.In addition, this Infrared CO2 Sensor For Arduino (400~5000 ppm) is a high-performance sensor that combines the technology of mature infrared absorption gas detection with precision optical circuit design as well as sophisticated circuit design. It has characteristics such as high sensitivity, high resolution, low power consumption, fast response, anti-water vapour interference, no poisoning, high stability and long life. The unique of this sensor is that it has onboard converters which give you serial outputs and also gives analog output ranging 0.4V-2VDC.SKU: n/a -
Basic Electronic Components
MIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
-61%
Basic Electronic ComponentsMIC2288YD5-TR-MICROCHIP-DC-DC Switching Boost (Step Up) Regulator, Adjustable, 2.5V-10Vin, 3.6V-34Vout, 1Aout, SOT-23-5
The MIC2288YD5 TR is a 1A 1.2MHz PWM Boost Converter in low-profile. It implements a constant frequency, current mode control scheme with internal compensation that offers excellent transient response and output regulation performance. The high frequency operation saves board space by allowing small and external components. The fixed frequency PWM topology also reduces spurious switching noise and ripple to the input power source.
Features:
- Stable with ceramic capacitors
- High efficiency
- low input and output ripple
- Output over voltage protection
- Over-temperature shutdown
- -40 to 125°C Junction temperature range
SKU: n/a -
Uncategorized
Micro USB Cable for Raspberry Pi- 80CM
Micro USB Cable for Raspberry Pi- 80CM
The Micro USB cable for Raspberry Pi is becoming an increasingly popular choice for both powering the device and enabling data transfer. Its dual functionality—supporting both power delivery and data bandwidth—makes it ideal for Raspberry Pi applications. This setup allows you to not only power the Raspberry Pi but also use it as a display device through a single connection. Imagine carrying your Raspberry Pi and its operating system in your bag or pocket, ready to plug into your laptop with just one cable.
With the right software, this setup would seamlessly integrate with both Windows and Linux, enabling users to display and interact with the Raspberry Pi environment through their computer’s peripherals. This concept is similar to running a virtual machine, but without the heavy resource demands on the host system. Such capabilities open up many possibilities, particularly for beginners who want to experiment and learn without the need for complex configurations.
SKU: n/a -
Batteries, Batteries | Chargers and Accessories
MICRO-STEPPING STEPPER MOTOR DRIVE 20-80V 7.2AMP
-50%
Batteries, Batteries | Chargers and AccessoriesMICRO-STEPPING STEPPER MOTOR DRIVE 20-80V 7.2AMP
   Peak Current    SW1    SW2    SW3 2.40A ON ON ON 3.08A OFF ON ON 3.77A ON OFF ON 4.45A OFF OFF ON 5.14A ON ON OFF 5.83A OFF ON OFF 6.52A ON OFF OFF 7.20A OFF OFF OFF Standstill Current Setting :SW4 is used for standstill current setting. OFF mean s that the standstill current is half of the dynamic current ; and ON mean s that standstill current is the same as the selected dynamic current. Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver.Switch Selection Table For Step Resolution setting:   Steps/Rev    SW5    SW6    SW7    SW8 400 OFF ON ON ON 800 ON OFF ON ON 1600 OFF OFF ON ON 3200 ON ON OFF ON 6400 OFF ON OFF ON 12800 ON OFF OFF ON 25600 OFF OFF OFF ON 1000 ON ON ON OFF 2000 OFF ON ON OFF 4000 ON OFF ON OFF 5000 OFF OFF ON OFF 8000 ON ON OFF OFF 10000 OFF ON OFF OFF 20000 ON OFF OFF OFF 25000 OFF OFF OFF OFF Package Includes:- 1 x Rhino Micro-Stepping Stepper Motor Drive 20-80V 7.2Amp
SKU: n/a
