Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5233–5256 of 6089 results
-
Development Boards
SmartElex PS2 Sheild for Arduino
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode. (Default)
- A status LED
- Jumper selector to select different UART Baud Rate (74880 (Default), 9600, 57600, 115200). Default: – when no jumper is attached.
- Jumper selectors to select different digital pin as UART – TX and RX pin.
SKU: n/a -
Sensors
SmartElex RLS-06 Analog & Digital Line Sensor Array
- Operating voltage: 4.5V to 5.0 V
- Output format: 6 Analog and Digital voltages.
- Optimal sensing distance: 0.125″ (3 mm).
- Potentiometer to adjust the sensitivity of the individual sensors.
- The module is a convenient carrier for six IR emitter and receiver pairs evenly paced.
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs that can be connected directly to microcontrollers
SKU: n/a -
Basic Electronic Components
SN04-N NPN NO 5mm BN-5-30v Detection Distance Proximity Detector Sensor
-65%
Basic Electronic ComponentsSN04-N NPN NO 5mm BN-5-30v Detection Distance Proximity Detector Sensor
The SN04-N NPN NO Proximity Sensor is a reliable and durable inductive sensor designed for detecting metal objects at close range. Operating on a wide voltage range of BN-5-30V , this sensor is ideal for industrial automation, robotics, and smart systems where non-contact metal detection is required. It features a 5mm detection distance and NPN Normally Open (NO) output configuration for versatile integration.
Thanks to its compact design and IP67-rated enclosure, the SN04-N sensor performs well in harsh environments, providing consistent operation even in dusty or wet conditions. With a fast response frequency of up to 500Hz, it can be used in systems that require rapid detection and switching. A built-in LED indicator provides real-time feedback for power and object detection status.
SKU: n/a -
-
-
Basic Electronic Components, Electronic Components, PCB Adapter
SOIC/SSOP TO DIP 20 PIN Adapter-2pcs
-33%
Basic Electronic Components, Electronic Components, PCB AdapterSOIC/SSOP TO DIP 20 PIN Adapter-2pcs
SOIC/SSOP TO DIP 20 PIN Adapter is a Perfect for use with Arduino / Raspberry Pi or any microcontroller. This is a Double-Side PCB Circuit Board, Each PCB board has 20 pins. A side for pin pitch size 1.27mm, It can be used for most of the SO20, SOP20, SOIC20 to 2.54mm DIP. B side for pin pitch size 0.65mm, It can be used for most of the SSOP20, TSSOP20, MSOP20 to 2.54mm DIP.
8-Pin SOIC/SSOP to DIP Adapter is a small PCB that lets you adapt SOIC/SSOP packages into a DIP footprint. These are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC/SSOP footprint. You can also use it for prototyping, to make SOIC/SSOP packages compatible with solderless breadboards.
The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm pitch PCB board, breadboard, and 600mil width 20 pin DIP socket.
Features:
- Tiny size
- 8 pin
- SOIC/SSOP to adapter.
Package Includes:
1 x SOIC/SSOP TO DIP 20 PIN Adapter-2pcs
SKU: n/a -
Sensors
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
SKU: n/a -
-
-
Electronic Components
Sop16 Sop28 To Dip16 Dip28 Pcb Adapter
This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that You need not to buy the DIP chips for prototyping especially.Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
SOP16 SOP28 TO DIP16 DIP28 PCB Adapter
-38%
Basic Electronic Components, Electronic Components, PCB AdapterSOP16 SOP28 TO DIP16 DIP28 PCB Adapter
This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board. You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging. So that you need not buy the DIP chips for prototyping especially. Just solder the SMD chips on the board and plug it into the breadboard will make you convenient to do prototyping. It can be used repeatedly also.
Specification:
- Board Color: Yellow.
- Pitch Patch: 0.4 mm.
Package Includes:
1 x SOP16 SOP28 TO DIP16 DIP28 PCB Adapter.
2 x Burg connector.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
-29%
Basic Electronic Components, Electronic Components, PCB AdapterSOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
This is a SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate. Just solder the SMD chips on the board and plug them into the breadboard will make it convenient to do prototyping. It can be used repeatedly also.
Note: Package includes one Quantity of SOP16 Transfer to DIP16 IC Adapter in the image shows both sides of Adapter
Specification:
- Board Color: Yellow.
- PCB Dimensions (L x W x H mm: 21.5 x 16 x 1.5
- Pitch: 0.4 mm.
Package Includes:
1 x SOP16 Transfer to DIP16 IC Adapter Converter Adapter Plate (Pack of 5)
SKU: n/a -
Electronic Components
Sop8 Tssop8 Ssop8 To Dip8 Adapter-2Pcs.
- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size 1.27mm, It can be used for most of the SO、SOP、SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP、TSSOP、MSOP to 2.54mm DIP.
SKU: n/a -
Basic Electronic Components, Electronic Components, PCB Adapter
SOP8 TSSOP8 SSOP8 TO DIP8 Adapter-2Pcs.
-38%
Basic Electronic Components, Electronic Components, PCB AdapterSOP8 TSSOP8 SSOP8 TO DIP8 Adapter-2Pcs.
The SOP8 TSSOP8 SSOP8 TO DIP8 ADAPTER is a tiny adapter for all SO, SOP, TSSOP, MSOP based SMD chips/transistors. You can solder your SMD chips or use for programming PIC12F629/675 like chips. It is Dual-sided SOP8/SOIC8/SO8/TSSOP8/SSOP8 SMD to DIP adapter, one side is for pin pitch size 0.65 mm, and another side is for 1.27 mm pitch.
Just connect this adapter on your PIC programmer and push the PIC12F series chips on PCB for loading the code into chips.
Note: Header pins are not included in Package.
Specifications:
- Dimensions: 12 x 12 mm.
- Pitch Patch: 0.4 mm.
Features:
- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size 1.27mm, It can be used for most of the SO, SOP, SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP, TSSOP, MSOP to 2.54mm DIP.
Package Includes:
1 x SOP8 TSSOP8 SSOP8 TO DIP8 Adapter-2Pcs.
SKU: n/a -
-
Drone Parts
SP RACING F3 FC Replacement Accessories Set
Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: n/a -
Drone Accessories, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: n/a
