Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 5521–5544 of 6089 results
-
Development Boards
T48 Universal Programmer Kit with 6 IC Adapters
- T48 (TL866-3G) hardware Parameters: 32-bit MCU with 120MHZ, 4-layer PCB Design, USB2.0 HS 480MHZ;
- Volume: 10X6.5X2.8 cm (almost the same as TL866II);
- 16-channel ISP, total 56-channel dedicated IO, 56-channel high-speed high-voltage isolation;
- VCC voltage 1.8-6.5V 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable;
- Power consumption: 5V <500MA.
SKU: n/a -
Basic Electronic Components
T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
-46%
Basic Electronic ComponentsT8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
This is T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw. It is used with 8mm Lead Screw in general machine tools such as 3D printing.
These nuts are mainly used for high transmission, precision transmission equipment, with elimination gap, elimination of poor, silencer function, anti-vibration functions.
Suitable for 3D printer Reprap Z axis, CNC.
It is made from brass and very reliable in linear motion applications.
This will provide easy to install and convenient to use.
SKU: n/a -
-
Basic Electronic Components
TACT SWITCH KW11-3Z 5A 250V Micro Switch Round Handle 3 Pin N/O N/C for 3D Printers –(Pack of 2)
-51%
Basic Electronic ComponentsTACT SWITCH KW11-3Z 5A 250V Micro Switch Round Handle 3 Pin N/O N/C for 3D Printers –(Pack of 2)
This is TACT SWITCH KW11-3Z 5A 250V Micro Switch Round Handle 3 Pin N/O N/C for 3D Printers. Microchip is ideal for application in any form of circuitry that controls voltage and currently rated components.
It is a sense-sensitive switch that forces the passive motor through which some travel into electronic contact cause speed, but to turn on the electric circuit. It has a small space, instant motion, and small style handling. Widely used in electronic products, appliances, electrical and electronic appliances, household appliances and so on.
For example computer mouse, electronic car, communication device, commodity war industry, gas meter, gas water heater, coal gasifier, small appliances, etc.
SKU: n/a -
Basic Electronic Components
Tact Switch-TK-052-4 Pin 4×4
Tact switches have a wide range of applications and are commonly encountered in both daily life and work. The quality and specifications of tact switches can vary, which means their use and suitability can differ depending on the situation. Without a basic understanding of how tact switches function and operate, it’s easy to encounter common issues that may lead to failures, potentially causing damage to the equipment or preventing proper operation of the circuit.
Features:
- Good feeling and long life;
- Micro-miniature, light operating;
- Snap-in type, can be mounted directly on P. C. Board and good for electrostatic discharge;
- Â It has a lot of choices for button shape and height and it is easily to install and kind of product;
- Â The tactile switches/tact switch come with multiple cap and color options, excellent tactile
- feedback and high reliability dome technology.
SKU: n/a -
Basic Electronic Components
Taidacent Air Temperature Sensor Probe Enclosure (Shower SHT20 Humidity Sensor Enclosure)
-18%
Basic Electronic ComponentsTaidacent Air Temperature Sensor Probe Enclosure (Shower SHT20 Humidity Sensor Enclosure)
Taidacent Air Temperature Sensor Probe Enclosure
This is the Taidacent Air Temperature Sensor Probe Enclosure with SHT20 Humidity Sensor Enclosure.
Note: The product is made from sintered copper particles with a nickel-plated finish, offering excellent breathability and high-temperature resistance. It is dustproof and anti-condensation, making it suitable for high-temperature environments, though not recommended for use in high-humidity conditions.
Features
- M12 thread
- Length :- 40mm
- Inner diameter :-10.9mm±0.1mm
- Thread part length :- 9mm
- Hole depth :- 36mm±0.5
- Tail wall thickness about :- 2mm±0.2
- Operating temperature: -50℃~200℃
- Nickel plating Thread size:- M12*1.50
- It can be used for AM2321 HTU20 SHT10 SHT11 SHT20 SHT21 SHT15 SHT75 SHT30 SHT35
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
-33%
Motors | Drivers | Pumps | ActuatorsTB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
-35%
Motors | Drivers | Pumps | ActuatorsTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-40%
Motors | Drivers | Pumps | ActuatorsTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6612 D1 Motor Driver Shield
- Interface: I2C
- Power supply voltage: VM = 15V max
- Output current: Iout = 1.2A ( average ) / 3.2A ( peak )
- Standby control to save power CW / CCW / short brake / stop motor control modes
- Standby control mode-I2C mode: control TB6612’s STBY with I2C protocol
- IO mode: control TB6612’s STBY with Spin
SKU: n/a -
-
-
Flight Controller & Accessories, FPV Antennas and Trans-Receivers
TBS Triumph Antenna FPV With SMA Male Connector-(Copy)
-33%
Flight Controller & Accessories, FPV Antennas and Trans-ReceiversTBS Triumph Antenna FPV With SMA Male Connector-(Copy)
- Connector:Â Male SMA.
- Polarization – RHCP
- Frequency Range: 5500 – 6000 MHz
- Gain: 1.26 dBic
- Axial Ratio: 0.74
- Antenna Length(mm): 82
Note: This is not an original TBS product, but a high-quality clone of one.
SKU: n/a -
Basic Electronic Components
TC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8
-46%
Basic Electronic ComponentsTC7660SCOA-MICROCHIP-DC/DC Inductorless Adjustable Inverter, 1.5 V to 12 V in, -12 V to -1.5 V/20 mA out, SOIC-8
The TC7660S device is a pin-compatible replacement for the industry standard 7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding -1.5V to -12V output using only two low-cost capacitors, eliminating inductors and their associated cost, size, and electromagnetic interference (EMI). Added features include an extended supply range to 12V, and a frequency boost pin for higher operating frequency, allowing the use of smaller external capacitors.
The onboard oscillator operates at a nominal frequency of 10 kHz. Frequency is increased to 45 kHz when pin 1 is connected to V+. Operation below 10 kHz (for lower supply current applications) is possible by connecting an external capacitor from OSC to the ground (with pin 1 open). The TC7660S is available in 8-pin PDIP and 8-pin Small Outline (SOIC) packages in commercial and extended temperature ranges.Applications:
- RS-232 Negative Power Supply
- Simple Conversion of +5V to ±5V Supplies
- Voltage Multiplication VOUT = ± n V+
- Negative Supplies for Data Acquisition Systems
and Instrumentation
SKU: n/a -
Sensors
TCRT 5000 Dual Channel Line Tracking sensor
- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
SKU: n/a -
