Recommended Products
Raspberry Pi
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: n/a
Shop
Showing 5689–5712 of 6075 results
-
-
Sensors
US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation
- Voltage: DC 2.4V – 5V
- Average Current Consumption: < 2mA
- Output mode: level or UART
- Detection distance: 2cm – 450cm
- Working temperature: -20°C to +70°C
- It features temperature compensation.
- Provides two output modes level or UART.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
USB 32Ch Servo Motor Controller Board support PS2 WIFI with USB Cable
-31%
Motors | Drivers | Pumps | ActuatorsUSB 32Ch Servo Motor Controller Board support PS2 WIFI with USB Cable
- Baud rate (USB): 115200
- Baud rate (bluetooth, UART): 9600
- Storage Flash capacity: 16M
- Mode to choose: 4 types
- Simultaneous controlling servo number: 32 channel
- Max action groups: 256 groups
- Communication agreement: UART
- Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
SKU: n/a -
Basic Electronic Components
USB Blaster ALTERA CPLD/FPGA Programmer
SKU: 498537
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG.
SKU: n/a -
Basic Electronic Components
USB Fast Charging Module
USB Fast Charging Module
This buck module is designed to charge phones through a USB port. It is compatible with Quick Charge 3.0 and can handle input voltages from 12V to 24VDC. The module utilizes the IC IP6505, a step-down converter that includes an integrated synchronous switch.
Application:
- Car Charger
- Fast Charger Adaptor
- Intelligent Power Strip
Features:
- Supports multiple fast charging protocols.
- Input over-voltage, over current, under-voltage protection.
- Output overcurrent, short circuit protection
- Module over-temperature protection.
- Long lifespan.
SKU: n/a -
Development Boards
USB ICSP PIC Programmer – UIC00B
- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: n/a -
Basic Electronic Components
USB LED Book Lights
Buy the new USB LED Book Light. It is Lightweight, compact and makes it easy to carry and handle. It is best Suitable for notebook computers, desktops, computers, mobile power supplies, etc. It’s small in size and is very easy to install.
Features:
- Lightweight and compact making it easy to carry and handle.
- Light Source: LED Bulbs, Portable and easy to carry
- Suitable for notebook computers, desktops, computers, mobile power supplies, etc.
- Mini size, taking little room, easy to install, convenient to use.
- Portable and easy to carry.
- Adopting high technology, show excellent performance.
- Current: 500mah LED quantity
SKU: n/a -
(ESC) Drone Speed Controller
USB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
-17%
(ESC) Drone Speed ControllerUSB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
- BL-S/BL-32 can use BLHeli-16 and BLHeli-32 software. (Connect the ESC signal line end to the computer USB interface and connect with the assistant software.)
- BLHeli-16 software Supports ESC of SIL and ATMEL chips ;BLHeli-32 software Supports ESC of STM chips.
- Convenient to set up various functions of open source ESC on the computer.
- The ESC can be set to one-way or two-way, and the motor starts current size. One-way ESC commutation.
- BLHeli open source ESC special.
SKU: n/a -
Batteries | Chargers and Accessories
USB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
-26%
Batteries | Chargers and AccessoriesUSB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Color: BLACK
- Input / Output Current: Maximum Input 0.6
- Easier for installation save time and money
- Easy to use.
SKU: n/a -
Batteries | Chargers and Accessories
USB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
-18%
Batteries | Chargers and AccessoriesUSB Power DC 5V 1A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
SKU: n/a -
Batteries | Chargers and Accessories
USB to Micro USB Cable wire 1M for NodeMCU
- Cable length: 1 Meter
- Colour: White, Orange, Black, Blue
- Weight: 17g
- Best replacement for the original one or acts as a spare
- The cable is made of durable and high-quality material
- Enable you to easily transfer all your files from or to cellphone
SKU: n/a -
-
-
