Recommended Products
Raspberry Pi 4 Model-B with 8 GB RAM
Shop
Showing 145–168 of 5361 results
-
Sensors
100k Ohm NTC Thermistor (Pack of 5)
- Temperature Coefficient Type: NTC
- Thermal Time Constant: 10s
- Resistance 100kΩ
- Tolerance: ±1%
- Maximum Power Rating: 75mW
- Maximum Operating Temperature: +150°C
- Minimum Operating Temperature: -80°C
- Dimensions(dia.): 2 mm
- Length: 30mm
- Application: Compensation, Control, Measurement, etc.
SKU: n/a -
Electronic Components
100kΩ 0.2W 6 Pin 2 Gang Rotary Carbon Potentiometer (15mm)
- Potentiometer Type: Rotary
- Maximum Resistance: 100kΩ
- Number of Gangs: 2
- Number of Turns: 1
- Power Rating: 0.2W
- Electrical Taper: Linear
- Element Material: Carbon
- Mounting Type: Panel Mount
- Termination Style: PC Pin
- Shaft Length: 15mm
- Shaft Diameter: 6 mm
- Tolerance: ±20%
- Actuator Type: Knurled Shaft
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
-10%
Basic Electronic Components, Capacitor, Electronic Components100nF 0603 Surface Mount Multilayer Ceramic Capacitor (Pack of 40)
100nF 0603 Surface Mount Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained.
Applications:
- Consumer electronics, for example
– Tuners
– Television receivers
– All types of cameras - Telecommunications
- Data processing
SKU: n/a - Consumer electronics, for example
-
Basic Electronic Components, Capacitor, Electronic Components
100nF 400V DIP Polyester Film Capacitor (Pack of 10)
-13%
Basic Electronic Components, Capacitor, Electronic Components100nF 400V DIP Polyester Film Capacitor (Pack of 10)
It is a 100nF, 400V, Through-Hole DIP Polyester Film Capacitor. The capacitor contains an insulator between relative conductors in an electrode. Non-inductive construction using metalized Polyester film with flame-retardant epoxy resin coating.
Features:
- Non-inductive, epoxy DIP coated, high moisture resistance.
- The dissipation factor is normally low and it is stable against high frequency and change of temperature.
- Recommended for high-frequency circuits like an s-curve compensating circuit.
- High reliability because of its excellent Self-Healing performance.
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
100nf 50v 1206 MLCC Capacitor(Reel of 4000)
-13%
Basic Electronic Components, Capacitor, Electronic Components100nf 50v 1206 MLCC Capacitor(Reel of 4000)
100nF 1206 Surface Mount Multilayer Ceramic Capacitor is a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained.
Applications:
- Consumer electronics, for example
– Tuners
– Television receivers
– All types of cameras - Telecommunications
- Data processing
Features:
- Supplied in tape on reel
- Nickel-barrier end termination
- RoHS compliant
- Halogen-free compliant
SKU: n/a - Consumer electronics, for example
-
Motors | Drivers | Pumps | Actuators
100RPM 12V LOW NOISE DC MOTOR WITH METAL GEARS – GRADE A
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
-51%
Motors | Drivers | Pumps | Actuators100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a -
DIY Learning and Robot Kits
100RPM Dual Shaft BO Motor With 65mm Robot Wheel-Reinforced Rubber Wheel-Geared DC Motor-Smart Car Robot Geared Motor-Black And Yellow-Pack Of 4
-50%
DIY Learning and Robot Kits100RPM Dual Shaft BO Motor With 65mm Robot Wheel-Reinforced Rubber Wheel-Geared DC Motor-Smart Car Robot Geared Motor-Black And Yellow-Pack Of 4
- The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a low-cost geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of high-quality rubber.
- BO motor Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction Wheel Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Shaft length:7 mm Motor Design:L-Shaped Shaft Diameter:5.5 mm Size:55x48x23 mm Diameter of wheel:65 mm Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car. The 65 mm wheel is only compatible with BO motor.
- BO Motor Operating Voltage:3 to 12V Current (without loading):40-180mA RPM:100 Output Torque:0.8 kg cm Wheel Loading Capacity (kg):2.5 D hole For BO Motor (mm):6
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
100uF 50V Aluminum Electrolytic Surface Mount Capacitor -(pack of 5)
-17%
Basic Electronic Components, Capacitor, Electronic Components100uF 50V Aluminum Electrolytic Surface Mount Capacitor -(pack of 5)
By design, both capacitors are electrolytic capacitors that use an oxide-layer dielectric, but only the second model can be considered an SMD capacitor. Given their higher capacitance values and voltage compatibilities, electrolytic capacitors are generally considered through-hole capacitors.
Applications:
- SMD technology, for high temperature re-flow soldering
- Industrial and professional applications
- Automotive, general industrial, telecom
- Smoothing, filtering, buffering
Features:
- Lightweight
- Polarized aluminum electrolytic capacitors
- Non-solid electrolyte
- self healing
SKU: n/a -
Drone Accessories, Propellers
1045 Propeller 10in 10×4.5 For Drone
2 x 1045 Propellers in a set. One propeller that rotates clockwise and one that rotates anticlockwise are included in the kit, along with two propeller shaft adapters. The propeller can be used with motors of various shaft diameters thanks to the adapters. With a rating of 800-2200 kV, this 1045 propeller can be utilised with brushless motors. This propeller provides smooth flights with longer flying periods ideal for FPV and aerial photography with a low kV motor (800–1400 kV). This propeller’s high kV motor (more than 1200 kV) provides swift flights ideal for acrobatic performances. With our A2212 1000KV, 1400KV, 1800KV, and 2200KV motors and our 30A ESC, this propeller is compatible.
Item name: 1045 PropellerDiameter: 10inPitch: 4.5inPropeller diameter: 25.4cmCentre bore diameter : 6mm front and 9mm reverse side.Centre seat TH: 6mmWeight: about 14g/pairColor: black, red, yellow, green, orange.Usage: for quadcopter and multirotorPackage included:1 x CW Propeller1 x CCW PropellerSKU: n/a -
-
-
-
-
-
Development Boards
10A Motor Driver Shield – MD10
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
SKU: n/a -
