Development Boards
Showing 145–168 of 269 results
-
Development Boards
LattePanda V1 – A Powerful Windows 10 Mini PC 2GB/32GB
- Base Frequency: 1.44GHz (1.92GHz Burst Frequency).
- RAM: 2GB DDR3L.
- Storage Capacity: 32GB.
- GPU: Intel HD Graphics, 12 EUs @200-500Mhz, single-channel memory.
- USB 3.0 x 1, USB 2.0 x 2.
- Gravity Interface Connectors x 6.
- Voltage: 5V@2A.
- Board Dimensions: 88 x 70mm / 3.46 x 2.76″.
- Package Dimensions: 110 x 94 x 30 mm/4.33 x 3.70 x 1.18″.
SKU: n/a -
Development Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: n/a -
Development Boards
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
-5%Development BoardsMega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
SKU: n/a -
-
Development Boards
Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
SKU: n/a -
Development Boards
Mega R3 Android Accessory Development Kit (ADK) + USB Cable
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
SKU: n/a -
Development Boards
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
- The board is compatible with Mega 2560.
- excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA
SKU: n/a -
-
Development Boards
MICROCHIP AC164164Development Board, PIC-IoT WG, PIC24F MCU, Google Cloud IoT Development Solution
-15%Development BoardsMICROCHIP AC164164Development Board, PIC-IoT WG, PIC24F MCU, Google Cloud IoT Development Solution
- Product: AC164164 Development Board, PIC-IoT WG, PIC24F MCU, Google Cloud IoT Solution
- Architecture: PIC
- Core Sub-Architecture: PIC24
- No. of Bits: 16bit
- Silicon Core Number: PIC24FJ128GA705, ATECC608A, WINC1510
SKU: n/a -
Development Boards
MICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
-16%Development BoardsMICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID
- Model: MICROCHIP Evaluation Kit, ATSAMD10 MCU
- Free Atmel IDE for development of C/C++ and assembler code for Atmel microcontrollers
- Programming and debugging the ATSAMD10 Xplained Mini
- You can programming the ATmega32U4 Using a Bootloader
- Xplained Pro extension headers can easily be strapped in
SKU: n/a -
Development Boards
MICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
-10%Development BoardsMICROCHIP Evaluation Kit, SAM C21 Xplained Pro, ATSAMC21J18A MCU, On Board Embedded Debugger
- Model: SAM C21 Xplained Pro, ATSAMC21J18A MCU
- Product: On Board Embedded Debugger
- 3.3 and 5V selectable target voltages
- Level converters between target section and EDBG section
- 32.768kHz Crystal mounted
- 16MHz crystal footprint (not mounted)
SKU: n/a -
Development Boards
MINI USB Host Shield 2.0 ADK
- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: n/a -
Development Boards
MLSoC™ DevKit 2.0
• On-bench: PCIe edge connector covered in protective coating and four footings to board, USB connector to provide power for stand-alone operation on a bench
• In PC: PCIe form factor (68.9mm x 160mm) with standard 98-pin PCB edge connector to interface with any standard host PC or motherboard. Bracket to assist in securing to PC included as option.
• Low Power: Typical workloads 10-15W. Supports PCIe Gen 4.0 up to x8 lanes, LPDDR4 x4, I2C x2, eMMC, µSD card, QSPI-8 x1, 1G Ethernet x2 ports via RJ45, UART x1, and GPIO interfaces. • Machine Learning Accelerator (MLA): Provides up to 50 Tera Ops Per Second (50 TOPS) for neural network computation.
• Application Processing Unit (APU): A cluster of four ARM Cortex-A65 dual threaded processors operating up to 1.15 GHz to deliver up to 15K Dhry stone MIPs that eliminates the need for an external CPU processor.
• Video Encoder/Decoder: Supports the H.264 compression standards HEVC (High Efficiency Video Coding) with support for baseline/main/high profiles, 4:2:0 pixels and 8-bit precision. The encoder supports rates up to 4K P30, while the decoder supports up to 4K P60.
• Computer Vision Unit (CVU): Consists of a four core Synopsys ARC EV74 video processor supporting up to 600 16-bit GOPS.
• Designed to offer the highest performance for low power embedded edge machine learning applications.
SKU: n/a -
-
Development Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
-56%Development BoardsNano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: n/a -
Development Boards
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Development Boards
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a