Special Offer
RUNCAM-LINK-PH-SL
₹15,629.00-
-
-
FPV Cameras
Caddx Air Unit Polar starlight Digital HD FPV system
- Transmitter Power(EIPP): FCC/SRRC: <30dBm; CE: <14dBm
- I/O Interface: USB-C,MMCX,3-in-1 port, micro SD card slot
- Operating Temperature Range: 0°to 40°C（32°to 104°F）
- Max.Transmission Distance: FCC/SRRC:4km;CE:0.7km
- Image Sensor: 1/1.8″ Inch 2.3Mega starlight sensor
SKU: n/a -
Flight Controller & Accessories
35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
-8%
Flight Controller & Accessories35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
- This is combo kit of Flight controller & ESC
- High performance & efficient flight controller & ESC
- Light weight, Easy to connect
- Compact in size
- Flight controller comes with ARM processor
- ESC is build to give best performance
SKU: n/a -
-
Electronic Components
300 RPM Dual Shaft BO Motor-Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: n/a -
Electronic Modules, Electronic Modules and Displays
1Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V
-34%
Electronic Modules, Electronic Modules and Displays1Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V
- Can be used for multimeter, converted to lithium battery charging
- Note: The OUT+Port can output an adjustable voltage
- Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC,Charging voltage: 4.2V DC
- Charging current: Max. 1A Discharging current: Max. 2A
- Package Includes: 1x Step Up Boost Module
SKU: n/a -
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, Propellers
AEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
-31%
Drone Accessories, DRONE COMBO, Drone Frame and Accessories, Drone Gimbal Accessories, Drone Kit, Drone Motor, Drone Parts, Drone Transmitter and Receiver, Flight Controller & Accessories, FPV Antennas and Trans-Receivers, FPV Cameras, GPS Modules, PropellersAEROKART INDIA UAV FULL CARBON FIBRE FRAME V650 V.22
AEROKART INDIA UAV FRAME V650 V.22 is being discontinued and will be replaced with the improved hexacopter drone, the Aurelia X4 Standard. Please read further on this page about all product upgrades.
- Built, Tested, and Configured Tarot 650 v2.2
- Carry Specialized Payloads With Ease
- Carry Up To 3.3 lb (1.5 kg) Payload UPTO.
- Up To 2 mi (3.2 km) Range & 25 Minute Flight Time
- Powered By Open-Source Pixhawk & Ardupilot / PX4
- Can Be Customized Depending On Customer Requirements – Ask Us!
- Global International Shipping!
Looking for a larger option that carries more weight? Check out our Aurelia X6 Standard Ready To Fly, Aurelia X6 Pro Ready To Fly, or the largest drone with the largest payload capacity.
SKU: n/a -
Flight Controller & Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
-57%
Flight Controller & AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
SKU: n/a -
Flight Controller & Accessories
Naze32 10DOF Flight Control Board
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
N20-6V-100 RPM Micro Metal Gear-box DC Motor
- Voltage range:3-6V
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: n/a
-
Drone Motor
3.5mm Gold Bullet Banana Connector Plug For ESC Battery Motor
3.5mm Gold Plated Bullet Connector is made up of copper for good conductivity and Gold Plated for long life and avoid oxidation. The pair has a flexible connector that firmly fits together to avoid loose connections. It is widely used in RC applications.
Features:
- Material: Copper (Gold Plated on top)
- Compatible for RC Motor ESC Battery Part
- Low resistance, and gives the best electric flow.
Package Includes:
1 x 3.5mm Gold Plated Bullet Connector – Male
SKU: n/a -
Drone Accessories, Propellers
1045 Propeller 10in 10×4.5 For Drone
2 x 1045 Propellers in a set. One propeller that rotates clockwise and one that rotates anticlockwise are included in the kit, along with two propeller shaft adapters. The propeller can be used with motors of various shaft diameters thanks to the adapters. With a rating of 800-2200 kV, this 1045 propeller can be utilised with brushless motors. This propeller provides smooth flights with longer flying periods ideal for FPV and aerial photography with a low kV motor (800–1400 kV). This propeller’s high kV motor (more than 1200 kV) provides swift flights ideal for acrobatic performances. With our A2212 1000KV, 1400KV, 1800KV, and 2200KV motors and our 30A ESC, this propeller is compatible.
Item name: 1045 PropellerDiameter: 10inPitch: 4.5inPropeller diameter: 25.4cmCentre bore diameter : 6mm front and 9mm reverse side.Centre seat TH: 6mmWeight: about 14g/pairColor: black, red, yellow, green, orange.Usage: for quadcopter and multirotorPackage included:1 x CW Propeller1 x CCW PropellerSKU: n/a -
LDR
5800B Light Dependent Resistor (LDR) White Color
The 5800B Light Dependent Resistor (LDR) White Color is a photoresistor (or light-dependent resistor, LDR, or photo-conductive cell). Which is a light-controlled variable resistor. The resistance of a photoresistor decreases with increasing incident light intensity; in other words, it exhibits photoconductivity. A photoresistor is made of a high resistance semiconductor.
Photoresistors are Semiconductor devices that use light energy to control the flow of electrons, and hence the current flowing through them. When the light level decreases, the resistance of the LDR increases. As this resistance increases in relation to the other Resistor; which has a fixed resistance, it causes the voltage dropped across the LDR to also increase. When this voltage is large enough (0.7V for a typical NPN Transistor), it will cause the Transistor to turn on.
when the light falls on its surface, then the material conductivity reduces and also the electrons in the valence band of the device are excited to the conduction band.
SKU: n/a -
Basic Electronic Components, Capacitor, Electronic Components
1.5F – 5.5V – Super Capacitor
Super capacitors are perfect for applications where the capacity of a standard electrolytic capacitor is too small and a rechargeable battery is bigger than needed. This 1.5F capacitor will run an LED / Arduino board for 15-20mins
Features:
- Capacitance : 1.5 F
- Maximum operating voltage: 5.5 V
- Body shape: Coin type(multi-layer structure)
- Tolerance on capacitance: -20 to 80%
- Internal resistance(max.) : 30 ohms
- Category temperature range: -25?C to 70?C
SKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Accessories, Drone Frame and Accessories, Drone Parts
XYQ-2 DIY Drone Mini Toy Drone Aircraft With Remote Wooden Assembly Mini Drone Quadcopter
-5%
DIY Kits, DIY Learning and Robot Kits, Drone Accessories, Drone Frame and Accessories, Drone PartsXYQ-2 DIY Drone Mini Toy Drone Aircraft With Remote Wooden Assembly Mini Drone Quadcopter
This quadcopter kit is a DIY Drone, the majority of the pieces of this one-of-a-kind wooden Drone toy are made of wood! It’s cool, light, classic, and well-designed. Because this drone toy is a DIY aircraft, you can assemble all parts together to make your own mini drone.
Features:
Functions: Sideward flight, turn left/right, up/down, forward/backward, altitude hold, one key takeoff/landing, 3D flip, headless mode, one key returnWith attractive headless mode, completely solving pilot loss-of-orientation problems. Altitude hold: With a built-in barometer, the aircraft will fly to a certain height when taking off.One-key taking off/landing/stop makes the operation more convenient and it is very suitable for novice operation.With one key automatic return function, the plane can find its way home easily. SPECIFICATIONSMaterial WoodModel XYQ-2Drone Battery Li-Ion 600mAhRemote Control Battery Li-Ion 500mAhFlight Height <120mFrequency 2.4GHzSKU: n/a -
DIY Kits, DIY Learning and Robot Kits, Drone Parts
DM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
-32%
DIY Kits, DIY Learning and Robot Kits, Drone PartsDM002 Mini DIY RC Drone Kit, Lightweight DIY Remote Controlled Drone Kit (Without Camera) 2.4G Mini Quadcopter Learning Drone Gift For Beginners
Specifications:
- Operating Frequency: 2.4GHz
- Gyro: 6 Axis
- Flight Time: About 7 minutes
- Charging Time: About 60-80 minutes
- Remote Control Distance: About 100 meters
- Battery For Quadcopter: 3.7V 300mAh Lipo Battery
- Operating Environment: Indoor & Outdoor
Features:
- 2.4G remote control technology, high sensitivity and easy operation.
- Lightweight and easy to carry and play.
- A perfect gift for drone lovers and children.
SKU: n/a -
IoT and Wireless, xBee Zigbee module
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
-34%
IoT and Wireless, xBee Zigbee moduleZigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: n/a
Products Grid
-
Sensors
Mini Solderless Breadboard -170 Tie Points for Arduino,DIY Project
This is a mini solderless prototype breadboard 170 points for the Arduino shield.
Description:
- Material: ABS
- Mini Solderless Breadboard
- Tie-point: 170Completely reusable
- Colored coordinates for easy component placement
- Size:45x34x9mm(1.771.34×0.35 inch)
- Color: Red, Black, White, Blue, green (It will be shipped randomly)
Package Includes:
1 x Mini breadboard
SKU: n/a -
FPV Cameras
Caddx Air Unit Polar starlight Digital HD FPV system
- Transmitter Power(EIPP): FCC/SRRC: <30dBm; CE: <14dBm
- I/O Interface: USB-C,MMCX,3-in-1 port, micro SD card slot
- Operating Temperature Range: 0°to 40°C（32°to 104°F）
- Max.Transmission Distance: FCC/SRRC:4km;CE:0.7km
- Image Sensor: 1/1.8″ Inch 2.3Mega starlight sensor
SKU: n/a -
Sensors
3.5-5.5V Standard Active Buzzer Module For Arduino
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.An active buzzer rings out as long as it is electrified. Compared with a passive buzzer, it is a bit expensive but easier to control. Typical uses of buzzers include alarm devices, timers, and confirmation of user input such as a mouse click or keystroke.This module is ideally suited to adding noise to your project and is compatible with a pin pitch of 2.54mm while functioning with microcontrollers such as the Arduino. This module lets you respond to programmatic changes with a lovely annoying buzzer that can be altered over a range of frequencies to ensure maximum irritation. To operate the I/O pin must receive a square wave to trigger the buzzer. This can be produced within all popular microcontrollers.Specification:- Working voltage: 3.5-5.5V
- Working current: <25mA
- PCB Dimension: 1.85 x 1.5 cm (L x W)
Feature:
- An active buzzer with a concussion internal source- so long as it will be called an energized
- The program easy to control- SCM can let a high-low sound- while passive buzzer did not.
- The Transistor drive module uses 8550
- With fixed bolt hole- easy installation- 2.6mm aperture.
Package included:
1 x Standard Active Buzzer ModuleSKU: n/a
-
-
-
Flight Controller & Accessories
2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
SKU: n/a
Best Sellers
Recently Added
Caddx Air Unit Polar starlight Digital HD FPV system
35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
35A 4in1 ESC & F4 V3S Plus Flight Control V3.5 V3 S Built-in Image Filtering OSD
2.4G 4CH Receiver Compatible with D8 Receiver w/ PWM Output
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
Raspberry Pi 4 Model-B with 8 GB RAM
Raspberry Pi 4 Model B 2GB Starter Kit
With the new upgrade to the Pi family, this is a complete starter kit of Raspberry Pi 2GB with all the mandatory accessories. These include products,
This combo has been made, keeping in mind the Raspberry Pi 4 Model B’s upgraded products so you can get it all in one go. So get it quickly and explore the world of Raspberry Pi 4.
Raspberry Pi 4 Model-B with 1 GB RAM
Raspberry Pi 4 Model-B with 1 GB RAM variant has been discontinued from Raspberry Pi Officials. Now 2GB RAM variant is available at the Same cost of 1GB. Below is the link for 2GB RAM Variant
Raspberry Pi 4 Model-B with 2 GB RAM
Introducing Orange Raspberry Pi Kits
Stuck in a never-ending cycle of learning Sensors, Micro-controllers, microprocessors, and communication protocols but not gaining any knowledge? Let us introduce you to Orange premium kits. These high-quality kits comes with free e-booklet and blogs to help you learn faster.
